How To Set Up A Mouse Trap

Setting up a mousetrap is easy. You can stick something eatable with the trap that a mouse loves so that it can get caught easily.

There is a wide range of mouse traps available in the market and by now you must have tried each one of them. All will get mice, yet there are contrasts relying upon your degree of solace cooperating with the dead mice and your spending plan.

If you are tired of mice, they are destroying everything and don’t know what to do, here is a detailed guide on how to set up a mousetrap.

What Is A Mousetrap?

A mousetrap is a specific kind of creature trap structured essentially to get and, ordinarily, execute mice. Mousetraps are generally set in an indoor area where there is an associated pervasion with rodents.



A mousetrap is a device for catching or killing mice. If mice have overtaken your home, running around your living room at night and making nests in your silverware drawer, it might be time to get some mousetraps.

Types Of Mouse Traps

Many different types of mousetraps are available in the market. Some of them are:

Metal Pedal Mouse Trap

One of the oldest but most effective traps is the metal pedal mouse trap. To set a metal pedal mousetrap:

  1. Pull back the metal arm and place peanut butter on the metal pedal with a toothpick or a knife. You do not want human scent on the trap.
  2. Pull the kill bar back and latch the metal armbar into the metal pedal.
  3. Place the trap perpendicular to the wall where the mouse activity has been seen.

Kill and Contain Mouse Trap

The kill-and-contain mouse trap is very similar to the metal pedal, but the trap is surrounded by a container. To set it up:

  1. Place peanut butter in the bait cup and close it.
  2. Pull the trap set level and place parallel to the base of the wall.
  3. When the mouse is killed, the mouse is not seen and the trap is thrown out.

Plastic Mouse Trap

There is a plastic version of the metal pedal mouse trap that is equally as effective. To set this type of trap simply press down on the spring-activated lever and place peanut butter in the bait area. The lever will clamp down on the mouse and kill it.

Electronic Mouse Trap

An electronic mouse trap is battery-powered and can be set along the wall. When the mouse enters the trap, it receives an electric shock powerful enough to kill it.

Live Animal Cage

A live animal cage allows homeowners to lure mice into a cage with food. Instead of killing the animal, however, it just traps the mouse. You can then get rid of the mouse as you see fit.


There are several types of mousetraps available in the market. It is up to you to choose the one of your choice. Some are very effective in catching a mouse others are easy to clean.

Tips for Avoiding Mice

  • To avoid mice in a home, be sure to close any cracks or gaps in the exterior of the house.
  • Use a foam sealant in a crack, cover it with wire cloth and add another layer of sealant. This should form a solid barrier from pests.
  • Smaller gaps can also be covered with steel wool. Mice have a tough time eating through this material.
  • To ward off mice, use a repellent. There are a number of repellents available that give off a smell mice do not like.


Avoid mice from entering the house by closing hidden cracks or gaps. Use a cloth or a piece of wood to close so that mice can’t take it off. You can also use mice repellent.

How To Set A Victor Mouse Trap

Setting a mousetrap is basic. You simply need to have a consistent hand and nerves of steel. It isn’t unreasonably terrible however it makes your heart race grasping a set mouse trap. Victor mouse traps or duplicates of Victor mouse traps are presumably the most broadly utilized kind of mousetrap on the planet. This article shows you how to set a Victor mouse trap.

Step 1: Remove the Mouse Trap Packaging

There is typically a staple holding the snap wire to the wood square. Evacuate the staple so the snap wire can be pulled back.

Step 2: Add Bait to the Trigger

The best mouse trap snare to utilize when setting Victor mouse traps is nutty spread. Victor mouse traps need a snare that adheres to the trigger and doesn’t simply lay on it. Spot enough nutty spread on the trigger with the goal that it covers the trigger. Ensure it has adhered to the trigger with the goal that it doesn’t tumble off when the mouse contacts it. Ensure the nutty spread is just on the finish of the trigger that is farthest from the mousetrap spring.

Step 3: Setting the Mouse Trap

Pull the snap wire back and lay the lock bar on the head of the snap wire.

Hotel end of the lock bar under the snare on the trigger

Gradually assuage the hand pressure holding the snap wire down and let

the snap wire presses upward on the lock bar which will press upward on the trigger. The teased finish of the trigger will lift up securing the mousetrap in the set position.

In the event that the lock bar sneaks off the trigger snare the snare will spring so be cautious when expelling pressure on the snap wire, get your fingers far from the business end of the mouse trap consistently. (the business end is the end that has the snare on the trigger) It might take a few attempts to get the mousetrap set.

Step 4: Placing the Mouse Trap

For capacity sheds, you should put mouse traps outwardly and within the shed. Outwardly you can put them along the edge of the shed where the establishment meets the ground.

On the inside of the shed adhere to the directions beneath:

Continuously hold the mousetrap on the end that the Red V is on, a similar end that the lock bar is stapled to the wood square. Cautiously place the mousetrap with the trigger end in a bad position. Mice like the security of strolling along with dividers so putting the mousetrap in this position intrude on their movements and interest them with food. Make a point to put the mousetrap in a territory that children and pets won’t have the option to upset it.

Step 5: Remove the Mouse From the Mouse Trap

When you have gotten a mouse you will need to expel the mouse from the snare as quickly as time permits. The most straightforward approach to dispose of the mouse is to toss the entire snare and mouse away. On the off chance that you need to set the mousetrap again, you should evacuate the mouse by lifting up the snap wire over a trash canister and delivering the mouse. Ensure the mouse is dead before delivering the wire. In the event that the mouse was gotten on a non-imperative body part like a leg or tail it might at present be alive.

Step 6: The Best Mouse Trap

How to Use My Favorite Mouse Trap

I have used many different types of mouse traps and this mouse trap
beats them all. It is easier to set, safer to set, easier to clean and I have never found it set off without catching a mouse. These are the features of and the steps to setting this great “better mousetrap”.

Why The Press N Set Is The Best Mouse Trap

The things that make the Press N Set the best mouse trap that I have ever used are these:

  • I have never found the mouse trap tripped without a mouse in it
  • It is simple to set
  • It is safe to set
  • It does not go off when setting it on the ground
  • It puts the bait in a place that cannot be gotten to without setting off the trap, which means more mice caught
  • It can be emptied without touching the dead mouse.

Step 7: Baiting the Ortho Press N Set Mouse Trap

The initial phase in setting the Press N Set mousetrap is to placed the snare in the little cup in the focal point of the snare. This is the protected method to lure the mousetrap in light of the fact that there is no peril of setting off the mousetrap when it isn’t set.
The best mouse trap snare for the ortho press n set mouse trap is a sunflower seed. Mice love sunflower seeds.
The Ortho Press N Set has a little bowl to hold the trap that impeccably holds a sunflower seed.
Sunflower seeds work better than the nutty spread in light of the fact that the mouse can’t just lick it.

Step 8: Setting the Ortho Press N Set Mouse Trap

After the sunflower seed is in the snare cup you will set the snare by:

  1. Pull the trigger back rearward of the mousetrap

  2. Lock the trigger by squeezing it down into the back finish of the mousetrap.

Step 9: Where to Put a Mouse Trap to Catch Mice

Mice like to stroll along with the dividers. The best spot to set a mousetrap is along a divider with the snare jaws confronting the divider. The edge of the shed where the base of the divider meets the ground is an extraordinary spot to set the snare. Mice will stroll along this region before entering the shed.

Step 10: Emptying the Mouse Trap

To empty the best mouse trap you simply pull the lever back as if you were setting the mousetrap. Don’t pull it all the way back or you will set the trap. If you do set the trap use a small stick to press on the red trigger to set it off. Hold your hand on the mousetrap trigger while setting it off so that it does not snap violently.


Setting up a mousetrap is the most important thing. Place it near a crack or a hole, stick a cheese or a potato in it with poison. Mice love potatoes. When they will come near the trap to get the potatoes, they will get stuck and die.

How To Set A Mouse Guard Mouse Trap

The age-old battle between mice and men. Annoying, tedious, and just plain icky, mice have been a plague (and are plague bringers) for centuries. And setting a mousetrap is just the thing you need to get rid of them.

If you want to get rid of these pesky animals once and for all, read on. You will learn how to set a mousetrap in a matter of minutes.

These snares are additionally exceptionally simple to utilize. You’ll simply need to follow a couple of steps to set the snare appropriately. There are two settings on the snare. The firm setting implies that the thing will be simpler to be set up. Nonetheless, it likewise implies its harder to trip, while the touchy choice alludes to the snare being anything but difficult to trip and marginally hard to set up.

For the best outcomes, it’s prudent to set the snare somewhere close to the two given settings. (Particularly in case you’re utilizing a Victor trap). Once you got the mouse, you can simply lift the snare’s slaughter bar and discard it and utilize the snare once more. Another choice is to toss everything out together.

You should put the snare a few feet separated in the piece of the house where you’ve seen the mice or rodents cruise by. They’re not poisonous and don’t contain any synthetic concoctions, so you won’t need to stress over any youngsters or pets being near. That doesn’t mean you shouldn’t be cautious however in light of the fact that we’re all mindful of how awkward pets and children can be.

Expel the Clip and Prepare the Bait

To set the snare, you’ll have to initially expel the clasp which is making sure about the execute bar. Next, you should take the armbar and move it. It should loom over the rear of the snare. All together for the rap to work, you’ll need a trap. Food high in protein, for example, nutty spread, hazelnuts, or chocolate work consummately.

Spread your ideal snare on the yellow pedal. You should realize that the Victor mouse trap doesn’t really require snare to work. Notwithstanding, remember that it will be more fruitful in the event that you use it.

Keep the Kill Bar Down

Presently you’ll have to keep the murder bar down. Do this with your thumb and hold it firmly. You should now move the armbar so it sits over the murder bar. At that point, you ought to attach the end under the teased cushion. This is where you should focus on the settings.

Set up the Trap

It’s an ideal opportunity to put the snare. Go to where the rat movement has been noticeable. At that point, set the snare against the divider, with the goaded cushion confronting the divider. That is; everything that is left to do is hang tight for the mouse!


People buy mousetrap from the market but they don’t know how to set them up. Setting up a mousetrap is an art. If you have set the trap right, you’ll be able to catch a mice and if not, then you will regret it for the rest of your life.

How To Set A Wooden Mouse Trap

What You Should Know About Catching a Mouse Before Setting a Trap

Getting a mouse is a precarious business on the grounds that there are numerous things you have to remember. Before embarking to purchase a mousetrap or looking into how to set a mousetrap, you should ensure you even have mice.

Since these creatures like to remain covered up and are normally dynamic just during the night, when you’re snoozing, it’s improbable that you’ll really observe one in your home. That is except if you’re extremely fortunate. Something else, how would you realize you have a mouse or even mice?

All things considered, you’ll notice mouse droppings around the house, and the bundles where you keep your food will be somewhat bitten. Furthermore, in case you’re presuming you have a mouse in your home, check all the wires and other comparable development.

Mice will in general bite through these. Assuming any of these signs are available, you can be certain you have a trespasser in your home. Presently we can begin investigating traps.

Wooden traps are more commonly known as snap traps because they snap and kill the mouse. They’re fairly easy to set.

Remove the Clip and Set the Bait

All you have to do remove the clip which is holding the kill bar securely. You’ll notice the armbar now. It should be moved over the back of the trap, so it hangs. When you’ve done this, you can put the bait down safely. Remember everything that I mentioned about the bait and apply those steps.

Pull Back the Kill Bar

Once this step is over, you’ll need to pull back the kill bar. In order for it not to snap back, you’ll need to hold it with your thumb tightly. In order to secure the kill bar, you’ll need to latch the armbar under it. You can do this simply by putting the armbar over the kill bar and latching it.
And you’re done!

Place the Trap

What’s left is to put the trap next to the wall. Make sure that the baited part is closer to the wall because the mouse is more likely to take it, and be killed in the process. If you’ve been paying attention to the article, you’ll know what to do about proper trap placement.

When you catch the culprit, you can either throw away the whole trap with the mouse still in it, or you can raise the kill bar and empty it into the trash can.

Wait for the Action

Remember that patience is one of the most crucial factors of catching a mouse, as it can take up to a few days for your mouse to go after the bait. If more than 3 days pass, though, it’s a good idea to place the trap in a different place, as that will surely increase your chances.


Wooden mousetraps are easy to set and are strong enough to kill the mice. They are most widely used. Remove the clip, pull back the kill bar, place the trap, and wait for your mission to accomplish.

Frequently Asked Questions (FAQs)


Q. How to get a mouse off a glue trap?

A. 1. The creepiest part. You have to move the whole trap into a container. My roommate sacrificed a big Tupperware that she’d once used to store homemade cookies. You can scoop up the trap with a dustpan, or just break down and grab it by a corner, and drop it in.
2. Drizzle the base of the trap with oil. Cover the whole base so it doesn’t get re-stuck, but DON’T DROWN THE MOUSE. Just a tablespoon or two should do it. It spreads.
3. Cover the container. Monitor progress. Add oil as needed.
4. Once it’s off the trap, release the greased-up mouse outside. It may or may not survive. It may or may not immediately turn around and come back inside. But you don’t have to kill it yourself or watch it suffer, and that’s the kind of denial that’ll get you through the ordeal.
5. Seal mouse holes with steel wool. Buy different traps.

Q. How to make a homemade mouse trap?

A. Mouse traps can be a little bit expensive, especially if you have a serious mouse problem. Fortunately, it’s easy to make cheap, effective mousetraps with everyday items. The crafty homeowner can turn cardboard rolls, plastic bottles, and coffee cans into homemade mousetraps.

Follow the steps below to make your own mousetrap at home easily:

1. Take a long cardboard tube with one end closed.

The cylinder may be from a paper towel roll or banner. It ought to be at any rate 12 inches in length, 2-5 crawls in measurement at its mouth, and have one end halted with tape or with a top. Spot something delicate in the shut end, for example, cotton balls or a wad of delicate texture.

2. Flatten the tube along one edge.

So as to cause the cylinder to sit on a level surface without it moving about, you’ll have to make a level edge on the cylinder. Press along the wrinkle in the cylinder along its length, at that point press another wrinkle in the cylinder roughly 40 degrees around from the principal wrinkle. Stick a ruler in the cylinder to additionally level the space between the most limited good ways from one wrinkle to the next.

3. Bait the tube.

Place a piece of cheese, candy, or bread in the far end of the tube. Ensure it is of sufficient mass to attract a mouse but not so heavy that it will significantly alter the weight of the tube. Do not choose foods that are sticky or gummy; they can be hard to get all the way down the tube.
  • If you do want to use, say, peanut butter, you could apply them to the bait end of the tube before applying the cap.

4. Place the tube on the edge of a countertop or second story landing.

Place the tube in such a way so that about 40% of it, including the baited end, hangs over the edge of the landing. If necessary, affix the tube with a small piece of tape, but take care not to tape it so firmly that it would not give way and tip over the edge of the landing or countertop when the baited end was subjected to slight force.
  • If you’re in a single-story home, obtain a cardboard box approximately one foot high and craft a cardboard ramp up to the top of the box. Place one end of the tube at the end of the box.

5. Place a trash can beneath the tube.

The can should be wide enough to accommodate the falling tube. Place a small pillow, soft cloth, or pad on the bottom of the can to cushion the tube and mouse who will soon be trapped within.
  • Do not use a trash can which is too wide. If you do, it’s possible the tube will come to rest on an angle, rather than straight up and down. If that happens, the mouse will be able to climb out of the tube easily.

6. Check the trap frequently.

When you see the tube sticking upright out of the trash can, it means the trap has been sprung. Look down the tube to ensure the mouse is within. Remove the tube and, keeping it upright with the open end up, take it at least five to ten miles from your house, preferably in an area free of housing. Dump the mouse out of the tube gently in a field or meadow.
  • This type of trap is extremely effective, and ideal for mice living on or with access to a second story.
  • If you don’t think it’s appropriate to drop the tube into a garbage pail several feet below the upper-story landing, you could affix the whole tube with a piece of string to the landing itself. That way, instead of dropping down into the garbage pail when the mouse triggered the trap, the tube would drop away and dangle harmlessly off the ledge until you recovered it.

Setting Up A Mousetrap Is Easy, But It Is Difficult To Get A Mouse In It

Mice are everywhere. Setting up a mousetrap can prevent mice from entering the house.

Mousetrap doesn’t work on every mouse. They are very clever and don’t get stuck in the trap.

But at least you could do an effort and set up a mousetrap in the right way to prevent your households from getting destroyed and if you are successful in getting a mouse, your effort is worth it.



How To Get Rid Of Mouse Using Vinegar

White vinegar is the most forceful vinegar out there. It makes sense, at that point, that it can avert mice. We definitely realize that mice scorn solid aromas, yet this may be the most grounded of all. You can continue doing this strategy until mice truly feel they need to leave your place.

How To Get Rid Of Mouse Using Toothpaste

You can likewise rub toothpaste along the base of your baseboards and anyplace else mice may get into your home. Mice disdain the smell of mint and will remain away.

Is Aluminium Best To Prevent Mouse From Entering The House

Yes, It surely is. When you discover the passage, use aluminum foil to fill it. Ball up some foil and stick it in their passageway. Mice don’t care for the sentiment of biting or burrowing at aluminum foil, which will keep them from attempting. This is an extremely basic and normal approach to deal with your mice issue without utilizing unsafe synthetic compounds.

What Are The Things Mouse Hate The Most?

Peppermint oil, cayenne pepper, pepper, and cloves.

Mice are said to abhor the smell of these. Gently splash some cotton balls in oils from at least one of these nourishments and leave the cotton balls in places where you’ve had issues with mice.

How To keep Mouse Away From Your House?

Use peppermint oil to repel mouse. Peppermint Oil to Repel Mice

You can splash the basic oil in various zones of your home that are regularly available to mice. In case you’re attempting to get the mice, you can deliberately splash the peppermint oil in places that don’t have a mousetrap. In principle, this should lead them to any place you have set it.

Baking Soda is another best way to keep the mouse away. The baking soda responds with the stomach corrosive and causes bubbles, mice can’t fart to pass the additional gas thusly their stomachs detonate. Pets and, children CAN FART so any abundance gas will be passed.

How to set up a mouse trap quickly?

Mice are a great problem in a household which create a lot of panic and destruction of useful stuff.

Mouse Trap:

A mousetrap is a specialized type of animal trap designed primarily to catch and, usually, kill mice which cause disturbance in either our household or places like mills, stores, malls etc.
Learning how to set up a mouse trap is not difficult but it can be a little tricky in the beginning.

After using the traps a few times you’ll become more confident when setting the trap and you’ll be able to remove those unwanted mice from your valuable property.

Procedure to set up a mouse trap:

Step 01:

When you are going to remove the trap from the packaging, you’ll notice a small staple holding the arm bar to the wooden base if its a snap trap.
Simply remove that staple using a pair of needle nose pliers or small screw driver and be careful.

Step 02:

When you are done removing the staple take out the arm bar attached with it and carefully hang it back off the trap.

Step 03: Time to Trick our :rat:

Place some bait on the metal bait pedal.
You can choose any bait of your choice but the best option is peanut butter. Mice love to eat peanut butter and the peanut butter sticks easily to the bait pedal so it will be considered as the best trapping choice.

Case 02: A Secret trick

Sometimes you might encounter an educated mouse which will be able to quickly eat out the butter without touching or triggering the trap.

In that case you have to loosely wrap and tie some dental floss around the bait pedal then spread the peanut butter over both dental floss and bait pedal so that when the mouse tries to eat the peanut butter from dental floss their teeth will get tangled in the dental floss because of the resistance caused on the bait pedal which will quickly trigger the trap.

Step 04:

Once the trap is baited, you have to carefully pull back the kill bar and hold it securely to the wooden frame.
Place your thumb on the corner of the kill bar because it might snap your finger if you hurry.

Step 05:

Take the arm bar and place it under the notch in the bait pedal.
This part is a lil bit tricky so you need to let a little pressure off the kill bar which will help in holding the arm bar in the bait pedal. It might take you a few times to get the hang of it because this step is a bit hard but you will get grip of it after a few tries.

Step 06:

Once the arm bar is seated in the bait pedal notch, quickly move your hands away from the trap.
Make sure not to have any fingers in the way of the kill bar in case the trap goes off.

Step 07:

Mice typically don’t run across an open room. They will travel along walls or mostly behind large objects or in tight spaces. So place your trap along with an adjacent wall or a place where you might have noticed their movement. This way you will quickly catch that lil enemy you’re looking for. :rat:

Step by step Video Procedure to trap a mouse:

How to perfectly set a Bait for mouse trap?

  • You can choose any bait of your choice but the best option is peanut butter. Mice love to eat peanut butter and the peanut butter sticks easily to the bait pedal so it will be considered as the best trapping choice.
  • Fill out the bait bucket with peanut butter.
  • Once the trap is baited, you have to carefully pull back the kill bar and hold it securely to the wooden frame.
  • Take the arm bar and place it under the notch in the bait pedal.
  • Once the arm bar is seated in the bait pedal notch, quickly move your hands away from the trap.
  • Keep the trap at some suitable place such as adjacent to a wall or some dark place.


Never overfill the bait bucket with bait. If you add too much bait to your mouse trap, you run the risk of the trap not firing correctly and this Overloading of the bait bucket is one of the most common mistake people do while setting up a trap and thinking it will help.

Where to place mouse traps?

The placements of your traps can determine whether or not we catch the culprit. It is helpful to understand a bit of rodent psychology and this will tell us exactly where we need to place the traps.

Choosing a suitable place to place your mouse trap is also an important part which should be kept in mind because Mice typically don’t run across an open room. They will travel along walls or mostly behind large objects or in tight spaces.

Best places to keep mouse trap for quick results:

1. Basement:

Basement is an excellent place to place your mouse traps as it is a really protected environment considered by mice. They often breed in basements so placing trap in basement is going to work effectively.
For confirmation check for holes in the walls of your basement for an evidence if a mouse is using it to get in and out or not.
If you find any holes, simply place a mouse trap near it, loaded with some tasty mouse trap bait!

2. Garage:

Garage is also one of the places in your house which is less frequently visited and used by humans.
Check out the connecting wall for any signs of mice’s damage. If you find any, then this area is a great choice to lay down a trap.

3. Kitchen:

One of the biggest attractions for mice is food. During the night, as you are laying in bed, mice will be roaming in your house looking for food and stuff.
As soon as they find your kitchen, they will know where it is and it will become a frequent room for them to visit. They will be using the protected route underneath your cabinets because they feel secure and safe in there.
Use this as a big advantage by placing a number of loaded mouse traps underneath your kitchen cabinets.

What is best place in kitchen to place mouse trap?

Proper trap baiting and placements are really essential to successfully eliminate mice from your home. Begin your mouse safari by concentrating on the kitchen area.

A mouse’s favorite food is grass seed. They naturally love to eat seeds, but house mice also love sweets like gum drops or marshmallows, and fatty foods such as soft cheese and peanut butter. The same foods that mice love to eat can also be used to bait and trap them.
The best place to put mouse traps in the kitchen is under the cabinets but other places should be considered as well for better results such as:

  • Somewhere you have heard mouse noises
  • Cabinets
  • Under the sink
  • Inside the panty
  • Inside cupboards
  • Near jars containing cheese or sweets.

What are the best mouse traps available?

If your eyes caught a mouse running here and there in your the house or anywhere else for that matter either is your sugar mills or some important property containing area, some bakery or in your cupboard, you are probably on a mission to find that lil enemy along with some of the best and most effective mouse traps to deal with the situation.

There are a wide variety of types of traps available, depending on your objective with a caught mouse.

Snap traps:

Snap traps are the most common and useful type of mouse trap which use a quick trigger system to catch mice. There are several kinds of snap traps when used correctly, can easily kill mice or catch mice. Snap traps can be difficult to set, but they are inexpensive, often reusable, and good for quick knockdown of a population.

Type How it works
Bar Trap Place bait on a pressure sensitive switch to attract mice. Once a mouse tries to move that bait, a spring-loaded bar is activated to trap it quickly.
Calm snap Set up the trap, as soon as the mouse tries to move the bait a spring-loaded calm jaw is activated.
Hidden kill snap It is designed with a chamber that has a baited switch at the end. Once a mouse enters the chamber and tries to move the bait, the hidden kill snap trap will kill the mouse
Electric traps It works by luring mice into a chamber then delivering a quick, fatal electric shock).
Sticky trap A sticky trap or glue trap is easy to set and has no-touch disposal and it can only be used once. It consists of an adhesive glue board which traps mice and prevents them from escaping.

How to set up a mouse trap

What is a mousetrap?
A mousetrap is specially used to trap a mouse. It is usually used to kill mice. Mousetraps are generally used inside the houses where the chances of rats are higher as compare to the outside. The main aim of the mousetrap is to catch or kill mice from home. They might resist against the mousetrap.
How do you set a mouse trap step by step?
We often think about how we can set up a trap for the mouse in the house. In this procedure, you will learn to set up a traditional mousetrap in the place. All you need is to follow the steps given below.
Step 1:
You often watch in cartoons that there is a piece of cheese in the mousetrap, but you can use peanut butter. Always use the thing that mice love to eat—otherwise, all in vain. You should follow the step carefully.
Step 2:
The wire is known as a staple that is being used to loosen the spring back, or you can use it to hold the spring back. You can lose the trap by removing the wire from the wooden trap.
Step 3:
Now, you need to set the spring back of the trap and make it tight with the help of spring.
Step 4:
You need to connect the wire with the side of the trap. Be careful while doing this because it is harmful.
Step 5:
Now, you need to hold the trap carefully.

What is the best bait for a mousetrap?
Several things are best for mousetrap, which is as follows.

  1. Peanut butter
  2. Cheese
  3. Marshmallow
  4. Beef jerky
  5. Gum Drops
    What food is irresistible to the mice?
    When we are going to trap a mouse, we use the wrong bait. Mice take food from your property, and the one most important thing, they took the food they like the most. So, you should keep in mind that always use something irresistible to mice. So, let’s have a look at the things that mice like most.
  6. Honey, syrup, and Jam.
  7. Chocolate and Candy
  8. You may use a hot dog, beef jerky, and bacon bits.
  9. Cheese
  10. Seed and nuts
  11. Peanut butter
  12. Almond butter.
  13. Many other things
    So, you must use what the mice love to eat. Otherwise, your work will not pay off. Trap a mouse is not easy, but it is not impossible.

How to set up a mouse trap?

Mice when entered in your house can cause so much damage to your property and things present at your home. They can hide anywhere in the house and sometimes it is difficult for you to figure out the place where they have hidden. So in this case, the only way to get rid of them is to set up the traps that will catch them automatically and causing them to die. But the question arises that how to set up a mouse trap?

There are certain kind of mouse traps, it depends upon you that what sort of trap you will use according to the place, adjustment and the money you can spend on buying materials for making these traps. The most effective and common mouse trap is the electrical one as it is easy to be used and kills the mouse effectively. Just follow these steps to set an electric mouse trap:

  1. Firstly, open the battery cover and insert the battery inside it. Most of these mouse traps originally comes with the batteries therefore you don’t need to worry about from where to get them.
  2. Now, you need to set bait for the mouse. There are some instructions to remember to set the bait. Firstly, wear gloves while doing it as the mouse will not come near the trap if it gets the scent of a human. Secondly, take the food that mice usually eat, so it can be cheese or things like peanut butter.
  3. After this, place the trap where you have often seen the mouse travelling. The best way is to place it somewhere in the hidden places because this is where usually the mice are found. So after placing it you need to turn the trap “ON” and a green light will indicate the confirmation.
  4. So, now after few minutes you will see the mouse lying dead on the place where you set the trap. Thus, this is the easiest way that can help you. Throw the trash in the can and you are ready to use the same trap for other mice too.

How to set a wooden mouse trap?

You cannot always afford an electric mouse trap or cannot have the facility in an emergency to buy it. So, you don’t need to worry as there are other mouse traps to help you too. One of them is the easiest-to-be-used wooden mouse trap. Follow these steps to set a wooden mouse trap.

  1. Pull the kill bar slowly and hang it backwards for a few seconds until you place the bait at the front side of the trap. Remember to put the bait which is most liked by the mice.
  2. Now, the clip for the kill bar you had placed backward before, is to be adjusted carefully with your thumb, as it can cause harm to your thumb.
  3. Then the same last step is left and that is to place the trap in the correct place. Remember to put that side in the exposure which contains the bait so that the mouse will be attracted more easily.

Other mouse traps:

1). The glue trap:

This is the easiest way to trap a mouse. For this you simply need to place glue and the mouse will get stick to it having no way to run away. This is a fun mouse catching trap as it can be effective for the mouse which is not able to be caught by any other way.

2). The Multi Catch Trap:

The purpose for using this trap is to can multiple traps at the same time. It is very effective to use if you have a great number of mice at your home and you want to get rid of them altogether. It can trap more than 10 mice at the same time and have the same glue property.

3). The Humane Trap:

If you are a soft hearted person and cannot see the animals getting killed, then you can surely use this mouse trap as it enables you to trap a mouse and release it without killing. However, you need to place them outside the house, catch them and then cage them and release them at a place far away from your house so that they won’t come back.

How to set up a guard mouse trap?

This is just another type of mouse trap. It has 2 settings:

  1. Firm setting = Easier to be set up but harder to catch.
  2. Sensitive setting = Harder to set up but easy to catch up.
    The best way is to adjust the setting between both of them. Just follow these steps to set this trap:

1.Firstly, take the clip of that is placed on the kill bar and put the bait over there.
2. Then, the clip that have been pull back by you must be placed just above the bait, so that when the mouse will enter near the clip to take the food, it will be entrapped.
3. Thus it is ready to be used and to be placed near the room you have seen the mouse frequently.