It might be troubling when your RCA TV won’t turn on, but that does not need to worry about. All you need to do is to unplug it and hold down the power button while it is unplugged Do that twice by leaving it for 5-10 minutes. Then plug it back in Also, check your power connections. If it still doesn’t work, call the service center for help.
My RCA TV won’t turn on:
RCA TV won’t turn on. Many people always complain that why is my RCA TV not turning on. In this article, we will explain that what are some relative problems that cause the RCA TV not to turn on? Moreover, you will also find all the possible solutions to get rid of the problem.
So, keep scrolling down.
The word RCA is the abbreviation of Radio Corporation of America. It has been a popular electronics brand based in the US that has served the public since 1919. People always prefer this brand because it is a well-experienced television manufacturer as compared to others and has provided around four thousand televisions with different sizes.
In short, this brand has always been the leader in the electronics industry due to its long-lasting and durable products. You will be thinking about now other more questions about RCA like How to set up an RCA Converter box? etc etc. keep scrolling, your all the confusions will be removed.
RCA TV won’t turn on troubleshooting:
If your RCA TV won’t turn on and you do not understand what to do just follow the below mentioned RCA troubleshooting method:
Use power button instead of remote control:
Most often, people use the remote control instead of the power button to turn on the TV because most often the RCA TV won’t turn on the red light:
However, if the TV switches on after pressing the power button directly then it’s an issue with your remote control and you should fix it.
It should be identified about the batteries inside the remote. Commonly, the batteries of the remote are damaged instead of the remote. If upon changing the batteries or the cell, the remote is still not working then it needs to be replaced.
Check out your cables:
The RCA TV needs to be properly connected to the power cable for proper working. First of all, make sure that your power cable is fully secured in the power outlet. Moreover, you should also check if the cable is properly connected at the back of the RCA TV.
Also, make sure about the cables ‘wear and tear. If they are too old; there are chances of internal damages in the cable that might result due to burning. This can disturb the transmission of electric signals, and that’s why your RCA TV won’t turn on. So, in such cases, you should replace the cables so that your TV will start working properly.
Why won’t my TV turn on after a power outage?
The next thing you might need to pay attention to is the power outages. If checking and replacing the cables didn’t solve the problem that it might be due to the malfunctioning of power outlets. If the power out is damaged, it will cause a hurdle in the transmission of electrical signals which will likely hinder the functioning of your TV.
RCA TV won’t turn on but has power:
There are capacitors that provide power to your TV. But these capacitors can cause problems with responsiveness to your RCV TV. They do so when these capacitors are overcharged by remaining on, yet not in use.
Therefore, you have to go for a power cycle, if you are suspecting such issues, whenever you are unplugging your TV, hold on to the “Power Button” at least for half a second to release any built-up charge in your plug. After that, plug the switch in and your TV will turn on.
Check out the front panel lock:
In RCA TVs, there are some panel locks that are designed to prevent children to on the TV without a remote control. If this feature is turned on, your TV will remain stuck and won’t turn on until you perform a power cycled to reset it. Therefore, this feature should be turned off.
RCA TV may heat up:
Sometimes the RCA TV might stop working due to overheating which results in functionless issues. Moreover, due to overheating, it will not even switch on. For this reason, you should switch your off for some time to let it cool. Once it is cooled down, try to switch it on.
How to reset RCA TV no picture:
If all the previously mentioned solutions didn’t work and still you are the same problem RCA TV won’t turn on how to fix, then you should reset your TV. Here are the simplest steps to reset your RCA LCD/LED:
Unplug the switch from the power source.
Let it unplugged for at least 5-10 minutes.
After 5-10 minutes, while the switch is still unplugged. For about 10 seconds you just need to press and hold the main power switch then release the button.
Plug the TV switch and set it back again.
For 5 to 10 seconds by pressing it holds the main power switch.
Slightly leave the switch if the powers are set up.
RCA TV turns on but the screen is black:
There might be chances that your RCA TV turns on but no picture is shown and the screen is black with no picture on it. This problem can be faced in several ways.
1. The TV screen is black and there’s no audio:
If your TV screen is black and there is no audio and no picture, you’ll have to check a small LED light in your TV that indicates the TV has the power. If there is no power while the TV is plugged in, then there might be any of the previous issues.
But, if the power indicator is on, then I think the issue must be in your TV software. In such cases, you can solve the problem by resetting the TV.
2. The TV screen is black but there is sound:
If your RCA TV’s screen is black but still sound is produced then the issue is something else. To identify that, there are two methods:
Check out the TV’s input:
When there is no picture on your RCA TV, then the first thing to check is the input source. Whether your TV is connected to a Cable box or a video game, make sure it is working and operating in the right way. For this try to connect your device to different sources, if the same problem is in the cable or the input device, try to connect it to other devices or switching it from one input set to another.
Check out the backlight:
In some RCA LCDs, there is a backlight that produces the picture. In case of any burn or damage to the backlight, the picture appears dark or black. To check out if you’re TV’s backlight is working or not, turns your TV on and turn off all the lights in the room. Now throw a flashlight on the screen to see if there is any picture. If the TV shows the picture in the dark, then your TV’s backlight is burnt out. In such case, you have got a new smart TV as the old one won’t work anymore.
My RCA Roku TV won’t turn on:
Whenever you are watching anything on your RCA Roku TV, the TV gets turning off and on again and again by itself without any direction provided by the RCA remote and sometimes you can see the black screen issues as mentioned previously. This issue is faced by many users and they do not have any know-how to tackle these problems. But there are some simpler methods to get rid of this turning on and off switch.
The first method is to simply reset your TV. All the steps required for resetting are mentioned previously. Secondly, if it still comes up with the same problem, then you have to make a factory reset. It is very easy by the following steps:
• Go ahead and find the reset button on your RCA Roku TV.
• Press and release the button after holding it for 15-20 seconds.
• Don’t leave it until you see RCA TV restart.
• Once it restarts, leave the restart button away and wait for your TV to turn on completely.
• Then simply complete all the resetting steps.
That’s it. By performing your RCA Roku TV reset without any remote control indications. By resetting it to default, all the issues will be cleared up.
Ask for customer support:
After trying all the above-mentioned alternatives, if the same problem is still appearing then you should ask the RCA customer service center for help. There are some issues that can’t be handled by you alone; you’ll need a trained professional to solve your problems related to electronics.
RCA TV Won’t Turn On Red Light Flashes:
When you notice that red light blinking in front of your RC TV then remember that your lamp is almost not working and this light will keep blinking it means you need to replace a lamp or maybe the lamp has not been closed perfectly.
Summary:
The RCA TV is a popular benchmark in the world of electronics. It has been on the top for the last 100 years by providing its best to the public. But sometimes their RCA TV won’t turn on due to some unexpected reasons such as troubleshooting or screen blackening. There are different problems that fall under these categories. However, they can be solved easily. If not, then you need a trained professional to help you.
Frequently Asked Questions:
Here are some questions that are asked frequently about RCA TV and they are as follows.
1. Is there any reset button on my RCA TV?
That’s not certain but yes there is a reset menu added in Your RCA TV software program. Press and release the menu button on the top side of your TV. A menu will appear for time, date, and location settings. Follow the instructions and your RCA TV will reset completely.
2. What to do when my RCA TV is on but the screen is black?
It is very simple. Just unplug the TV from the wall and remove the power cord from the back. This is similar to a soft reset. Wait for a minute and then plug it back in to test it again.
3. What is the best alternative to reset my RCA TV?
You need to unplug your TV and hold it unplugged for 5-10 minutes. Then plug it back in. Hopefully, this time it will work.
4. Why is my RCA TV not turning on and flashing red?
This might occur due to system error. If a RED light is blinking and the TV is not working properly, there is a serious issue in the system internally. This can be temporarily solved by restarting your TV. But to solve such issues permanently, you require service by calling for customer support.
5. Why does my RCA TV take so long to turn on?
Mostly, this occurs due to the failure of capacitors. The easiest solution is to replace the capacitors.
6. How do I fix my RCA TV that won’t turn on after a power outage?
After a power outage, you can fix your RCA TV that won’t turn by performing a power drain.
Unplug your RCA TV from the power cable.
Press and hold the power button for half a second. This will remove all the residual power from your TV.
Now plug the TV again into the power source and try to turn it on.
7. How do I get my RCV TV out of standby mode?
By performing a power cycle of your TV, the stored power of your capacitors can be released. To do so:
Unplug your RCA TV while holding the power button for 30-60 seconds.
This will release any built-up charge stored in your TV.
Now plug the TV back and try to turn it on.
8. How do I reset my TV without a remote?
-
You will have to unplug TV power from the socket.
-
Now by pressing the power button hold down the (down –volume) button on the TV, do not leave keep pressing then plug in it again.
-
Now slowly leave the button as you see the green led light appearing on TV.
9. How do you reboot a TV?
You can reboot it or restart it with the given remote control.
-
By pressing hold the button of power which is appeared on the screen.
-
By pressing hold the Power button till you see the menu on the screen now select Restart/Reboot.
10. How do I reset my Smart TV?
The first option is to reset it from the factory.
From home, you can do the following steps.
Step # 1: Power on your Tv.
Step # 2: Go to the menu.
Step # 3: Select support Choose Self Diagnosis.
Step # 4: Select Reset then enter it will ask your security PIN then warning message will appear.
Step # 5: Your Tv will start turning on and off it will be displaying the setup screen.
Conclusion:
The problems related to electronics are always unexpected. You never know and the newly opened machine is filled up with problems. But there is no need to worry about these problems come up with many solutions. So, you should search out how to tackle such problems if your RCA TV won’t turn on or show any other fault. This article will be quite useful for you.
