If you are domesticating a pet snake for sale, indeed its breeding and selling make a good profit. When planning on breeding a snake you first have to be sure beyond any doubt it has come to a level of maturity. You must decide the sex of the snake you intend on breeding.
Pet Snake Breeding:
Once your snakes are bred, in arrange to offer them you will require special licensing, which is exceptionally imperative to know since, on the off chance that you come up short to comply together with your state’s directions, you’ll get a fine.
Small snake breeding varies a little between different species but there are some basic precautions you should take a look at to make sure your snake is healthy, both before and after breeding.
5 Small Pet Snakes are Best to Breed From
- Corn Snake
- California Kingsnake
- Rosy Boa
- Gopher Snake
- Ball Python
Breeding and selling snakes may seem like a simple ordeal but in reality, it is much more complicated than having two snakes get together to make a clutch.
Summary: If you are a pet owner & want to sell your snakes, you need a license. Without a license & proper legal documentation, selling is considered legal. Selling rates vary for different species.
Points to Keep In Mind About Breeding:
How do you breed and sell snakes? Are there certain guidelines and rules you have to follow? Let’s find out.
What kind of preparation is needed?
To prepare your small pet snake for breeding, be beyond any doubt to allow it the right amount of heat. Snakes are for the most part content with temperatures of 85° to 100° Fahrenheit. Moreover, attempt to abstain from taking care of your snake after nourishing it, as this may cause them to spew their dinners.
A male must weigh over 700 grams and be at least a year of age. If your male snake does weight over that 700 grams you can then proceed to check its sperm plug. To do this, you must press on the cloaca (a vent on the back of the snake). By pressing on it there will be the white, cheesy matter that will then determine if the male is ready to breed.
For females, there have been instances where they can successfully breed at about 1200 grams of weight, but most breeders recommend that your female snake be at least three years of age and weigh 1700 grams.
Summary Temperature without any doubt is the main element for good breeding. After nourishing your snake avoid holding it or taking care of it as it may cause them to spew their dinners.
What Type of Hibernation Chamber?
Hibernation can be a key element for successfully breeding small pet snakes, depending on the type you have. You’ll want to provide your snake with the seclusion of a hibernation chamber. To make one, find a box just a little bit smaller than your snake’s cage. Fill it with five to ten inches of corncob bedding, or another type of similar bedding. Your snake will burrow in this. You’ll also want to make sure you maintain an even temperature of 55° to 60° Fahrenheit in this chamber.
Giving a Cooling Off Period (And Then Warm It Up Again)?
For your female to become fertile a cooling-off period needs to be provided. The ideal temperature to keep would be about 70 degrees Fahrenheit with a low of 20 degrees Celsius for about three months.
There should be a warm area in their cage at night. So be sure to reduce the temperature to 80 degrees Fahrenheit and 30 degrees Celsius, and then during the daytime, it should be back to a normal of 80 degrees (F).
When the cooling-off period is taking place, you can bring in a male into the female’s cage. You can have them together for a few days and separate them for a few more. They can try and breed but during that time it is not likely.
After giving your snake that cooling-off period you can then check to see if your snake has reached a good temperature. This is usually told by how the snake creates perspiration when being held.
Introducing The Snake Partner?
You now want to introduce your female to the male’s cage. Measure her willingness to breed by reading her body language. If she lies down and looks relaxed near the male, she is ready. you will want to leave the room and let nature do the rest. While there is a possibility of the two leaving injuries on one another, is it unlikely. They will eventually settle down and the two will connect.
Reintroduce your snakes for a few days in succession until the female looks like she has lost interest in the male. She will be producing eggs at this point. After this, all you have to do is wait for her to lay eggs or birth live babies. The gestation period is generally 28 to 45 days.
Taking Care Of The Female Snake?
If there are signs of the female having eggs, you can discontinue the process of introducing her to males. You will want to prepare the nesting box for her to lay her eggs in.
Obtain a lay box, which can be a Rubbermaid container, and put damp moss within it so the female can have her eggs there and coil around them. Once the female has laid her eggs, you will want to remove her from them but safely and carefully.
Once you have moved her away, place the eggs into another Rubbermaid box with a lid on top, to mimic an incubation period. But you cannot simply stick the eggs in the container without making the correct adjustments first.
Set the temperature of the container to about 90 degrees Fahrenheit. You will not need to worry about putting air holes in the container because you will occasionally check on them. You can check on the eggs once a week to make sure nothing has happened to them. By opening the lid, you let air in, hence not needing to make any circulation in the container.
Once you have tended to the eggs, the female is next. Try to feed her, if she does not want to eat you will need to wash off the scent of her eggs. She may refuse to eat because she wants to be with them. It is important to have her eat again because laying eggs takes a lot of work.
Finally, the eggs should hatch in about fifty-five days after the initial laying.
Summary: For proper breeding, you need to take into account the condition of tanks, healthy partner, time of their feed, adequate supply of heat, introducing partner at the right time & cooling off conditions of a tank. If you overlook these points, it will be very hard to manage pet snake breeding.
LAWS REGARDING BREEDING AND SELLING SNAKES
The exact rules and regulations for breeding and selling snakes and other rare animals differ from each state.
Some may not have any rules at all, while others will have you pay a large fine for disobeying their rules. One thing is for sure, you must obtain a license to breed any animal or reptile. This is listed under the Animal Welfare Act.
As for other licensing, it falls under the rule of each state. So below are listed states that do not require anything of the sort.
States with No Regulations on Reptile Breeding
- Alaska
- Colorado
- Iowa
- Michigan
- Minnesota
- Nebraska
- New Hampshire
- New Jersey
- New Mexico
- North Carolina
- Ohio
- Oregon
- South Carolina
- Wisconsin
- Wyoming
I would suggest looking into proper regulations whether you reside in a state that has no requirements or otherwise because there are often changes in business practices that may call you elsewhere.
Summary: License is for sure is must under the animal act law, yes there are few States which doesn’t require any strict rules & regulation for reptile breeding & selling.
HOW MANY SNAKES TO BREED AND HOW MUCH WILL BE THE PROFIT?
There is no set amount of how many snakes you need when breeding. At most, you will need a female and a male. That simple. Or you can have more females than males, so you will have a larger number of clutches to sell. But the maximum ratio of male to female should be 1:4. If the male ends up mating with more than four females, he will become stressed.
As for how long it would take to earn and make a profit from those snakes you breed, it depends.
It depends on how much you sell them for and how much the market is willing to pay for your clutch.
The job of a ■■■■■■■ is not as simple as breeding and selling their animals. Other costs go into how much they obtain in their salary.
The yearly salary for a reptile ■■■■■■■ depends on many of the factors that were stressed in the paragraph above. To reiterate, the salary they produce relies on how much of their species they produce, how rare they are, the value of the surviving clutch.
With all these factors coming into play your reptiles can be sold for thousands of dollars if that is how valuable one may view them as. Animals that result in good pay would be the ones with rare body colors that are typically chased after by collectors of those species.
Even with the good pay from the animals they have sold, they must take into account the costs of keeping that breed or rare species in stock with appropriate habitats that will keep the animal comfortable.
There is a large amount of money spent on keeping these animals comfortable. And while it is humane to keep it as such, if one were not to carefully provide the needs of the species, they are breeding it can turn into a disaster where no clutches are made.
The essentials for these animals range from humidifiers, UV lights, heated rocks to terrariums, food, and supplements, as well as veterinary care.
Many reptile breeders rely on the job as a hobby so they take it as a part-time job, and go on to have a full-time job elsewhere. And because they do not put their full attention on their breeding job, they do not make as much money as those who work on it full time.
Summary: How much profit you earn for selling a pet snake depends upon the health, look, different markets. Getting a good price is always a stroke of luck but on average it is not a bad deal at all to breed & sell a small pet snake.
Frequently Asked Questions (FAQs):
The following commonly asked queries about the selling of snakes. Hope it will give you a more in-depth insight into this topic.
How much do a pet snake cost?
On average the cost of a pet snake lies b/w $ 30 - $ 1000. The Hognose Snake is the expensive one species as its price starts from $100.
What is the best website to buy snakes?
Online Suppliers, Backwater Reptiles, XYZ Reptiles, and Snakes at Sunset are three relatively popular choices for buying a pet snake online
.
What is the cheapest type of snake?
Corn Snakes & Ball Python are the cheapest ones. The cost starts at $ 20.
How long does a snake live?
The pet snakes can live up to 10 to 15 years. 10 years is the average age but if they are handled & cared for properly may live longer.
CONCLUSION:
So we can conclude that the breeding & selling of pet snakes vary from species to species. Before adopting a pet snake for sale it’s an integral point to handle & breed them according to their needs & requirements. Only the good ■■■■■■■ reptiles are sold at good rates. And for selling the license is a must to have. For breeding make sure their captive conditions are good, keep a check on the physical health of your snake pets.