You can get water out of the charging port in many ways. Water will naturally evaporate from the charging port within approximately 1 to 2 hours. If any water other than fresh water enters the charging port of your device, you must rinse it in fresh water and dry it thoroughly with a dry and soft cloth.
Android phone or tablet’s charging port
Getting the water out of the charging port of Samsung devices will not charge if moisture is there in the charging port when it is plugged in. This is a preventative measure added to avoid any corrosion, and you will still be able to charge with a wireless charger on supported devices. A popup message will appear in the event a charger is plugged in while moisture is present in the charging port
Warning: To avoid electric shock and damage to your phone or tablet, do not charge it while it is wet or in an area where it could get wet. Do not handle the device, charger, or cords with wet hands while charging. Do not insert any object into the charging port. This can result in damage to your phone’s charging port.
If you try to connect your phone or tablet to the charger while the charging port is wet, you will hear an alarm go off with steps to disconnect your charger from the charging port. The alarm will continue to ring until the charger is disconnected. Gently shake the device to help remove liquid or moisture from the charging port.
Within 1 to 3 hours, the water in the charging port will naturally evaporate. If any liquid other than freshwater gets into your device’s charging port, you must immediately rinse it and dry it thoroughly with a dry and gentle towel.
Wireless charging is not affected by moisture or any foreign materials in the charging port. If your device supports wireless charging, you can try charging it that way. Make sure to completely dry the device before placing it on the wireless charger.
If the previous instructions do not work, please call 1-800-SAMSUNG (726-7864) or go to a Samsung walk-in customer service center.
Remove moisture from the charging port. Do not charge while it is wet or in an area where it could get wet. If you try to connect your phone or tablet to the charger while the port is wet, you will hear an alarm go off with steps to disconnect your charger. Water will evaporate from the charging port within approximately 1 to 3 hours. Rinse your device in fresh water and dry it thoroughly with a dry and soft cloth. If your device supports wireless charging, you can try charging it that way using a wireless charger.
There are a number of guides out there on how to get water out of your phone if you ever accidentally drop it in water, but there aren’t so many guides that are specific about how to get water out of your phone’s charging port.
I thought we should share these instructions, and hopefully, they will come in handy whenever you want to get water out of your phone charging port. These tips are sure to work for you whether you are using an iPhone or a Samsung Galaxy smartphone.
One way to get water out of a phone’s charging port is using cotton wool or an absorbent cloth. First of all, switch off your phone so that the pin doesn’t cause bridges in the electrical >> then wrap cotton wool or a tiny piece of absorbent clothing around a toothpick, pin, or needle (ensure this is thin enough to fit into the space in the charging port) and gently move it in a circular direction, drying the port you’d want to leave your phone switched off for some time so air gets into the port before having it turned ON.
Another amazing way to get water out of the phone charging port with rice. It’s a fact that rice lets phones dry rapidly, and for your charging port, its sure is something we know can work. If you have used wool and the phone is likely still sending you the moisture warning message, try placing your phone inside dry rice overnight. It is tested and it works.
You can get water out of the charging port by a standing fan. It’s an excellent source and more strong force of air, and a consistent one. Compared to just leaving it to dry on the dining table, a fan is concentrated, the air is dry, and it is constant, so all parts of the charging port get dried faster. Placing your android device or iPhone in front of a fan after using cotton wool or dry cloth really works better.
This is another nice option to get water out of the charging port. The water in the charging port isn’t enough to destroy the machine, so you can get away with using a vacuum hose to completely suck out the water from the charging ports. It works wonders.
If a whole or some part of your phone falls into water, or say you were drenched by the rain, leading to water entering the charging port, speakers, mouthpiece, battery, and some other parts of your phone, here is a checklist of things to do and not to do.
If you find out that water might have entered your phone, turned off the phone as soon as possible. Water is a powerful conductor of electricity, and while the electricity flows from your battery into your phone is mild, the water in the panel is forceful enough to cause a lot of damage to your phone. You would want to have it turned OFF and left until you are 100% certain that the panel is dried before restarting the device.
This might sound counterproductive, but in many situations, it is the correct thing to do. When your phone falls into saltwater, like at the beach, or into some other liquid other than freshwater, you would want to have the phone turned off, and rinsed in freshwater. Having substances like salt or oil either inside your phone panel or in the charging port is just as bad as using a wet phone. After rinsing, try drying thoroughly with a dry cloth, thoroughly drying the charging port and other ports and spaces, and then give the phone some time to dry up.
As long as your phone is still wet, and for some time after getting water out of the charging port, it’s not advised to plug your device into a power source. Moisture takes some time to dry, so try to not have any power plugged into the phone for at least 4 hours. Even after this time, if your device comes with a wireless charging feature, we advise using this until you are sure your phone is working fine.
Yes, a measure of warmth around your phone is great for helping your phone dry fast after dropping inside a liquid but be careful about the amount of heat your phone is exposed to. Leaving your phone out under the sun shouldn’t do damage, but having it too close to an electric bulb or fireplace could damage fewer things. In fact, for most liquid drops, leaving your phone in a well-ventilated area is just perfect.
This is purely for people who are certain that their charging ports are dried but are still getting a notification that it has moisture (Samsung Galaxy S7, S8, S9, S9+ or S10). Something similar should be on other android devices.
Go to Settings >> select Battery Usage >> scroll down to Recent Battery Usage >> find and tap on Android System >> tap on Force Stop (you will get a warning that it could cause system problems). Turning it off did away with the “Detecting Moisture” notification that was making it difficult to charge my device.
Wondering how to get water out of the phone charging port, many of us would quickly try to kick the water out of the port, but blowing into your smartphone charging port often forces the water to go further inside the charging port, making it difficult to dry.
When you connect a charger or any accessory to your iPhone XS, iPhone XS Max, iPhone XR, or later models, you’re iPhone can warn you if there is water in the Lightning port.
If you see one of these alerts popup messages, your iPhone has detected water in the Lightning port or on the Lightning cable or Lightning accessory. To protect your iPhone and the accessory, charging and accessory connection are unavailable until the Lightning port and the accessory are completely dry.
If you charge your iPhone while the Lightning port is still wet, the pins on the Lightning port or the cable can corrode and cause permanent damage or can stop functioning, causing connectivity issues for your iPhone or accessory
However you shouldn’t charge your iPhone when it’s wet, you might need to in an emergency. If you reconnect your iPhone to the Lightning cable or accessory, you have the option in an emergency to overthrow the liquid detection and charge your iPhone.
If you have a wireless charger, you can still use that to charge your iPhone. For best results, make sure that the back of your iPhone is dry before placing it on your Qi-certified charger.
A common cause of the iPhone charging port not working is the presence of dirt or dust in the charging port. Dust getting into the charging port of your iPhone is unavoidable and too much dust could get too deep into it, stopping it from charging. There could also be some particle or buildup of particles in the charging port preventing the connection and all you have to do in this case is remove the disturbance or clean the charging port.
Your iPhone charging port not working issue can be caused by a loose charging port. This is when the charging port is disconnected from the motherboard of your phone. This could happen when the charger is wrongly inserted, when an incompatible charger is used or when objects are inserted carelessly into the charging port.
Another reason for iPhone charging port not working is a bent charger port metal connector. The metal connector is the metallic attachment of the port to the motherboard and this can either become bent or damaged after becoming weakened.
Rusting is another reason why your iPhone charging port is not working properly. The metal becomes weak due to rusting and this makes the connection weak. Rusting happens over time and is caused by water. Stored water from the beach, holding your phone with wet hands or even sweat can cause your charging port to rust.
There are two different ways through which your charging port can be damaged. It could have been either physically broken or disconnected from the phone board. Either way, this is a more complex problem that would require the attention of a professional.
To fix your “iPhone charging port not working” issue, you could try properly cleaning it first. Turn off you’re iPhone, then use a light source to look into the charging port to check for any dirt or accumulated dust, you can clean it by using a new toothbrush or antistatic toothbrush to simply brush out the dirt or dust. If the dirt remains stuck in the port, you can try using tweezers or a cue tip.
We do not advise using a toothpick or paper clip because the toothpick could break inside the port, causing more damage and the paper clip conducts electricity and is sharp. You should be extra careful when cleaning the charging port, you don’t want to get the dirt even deeper into the charging port or cause any serious damage to the port. After cleaning the port, be sure to clean the entire phone for any dirt that might reenter the charging port. Also, check your lightning cable and clean it. If you are unable to clean the port yourself, you can take the phone to the nearest Apple store or phone repair store and have them clean it for you. This is generally the safer option.
If cleaning your charging port does not get your phone charging again or if there is no dirt stuck in the port at all and it doesn’t work then the port is probably broken, rusted, or disconnected from the phone board. Fixing this would require the attention of a professional.
We do not recommend the use of DIY tutorials for this kind of issue. Instead, take the phone to the nearest Apple store or phone repair store and have them repair or replace the charging port.
Put Your Phone in Front of a Fan, or Leave it Dry Naturally.
Listen to Your Phone’s Warning or Advice Messages.
Place Your Phone in Rice Overnight.
When your Android or iPhone won’t charge, first ask yourself whether your phone may have come into contact with water. Your phone also doesn’t have to go for a swim to sustain water damage. Moisture getting into your charging port can be just as bad as dropping your phone in a toilet.
Dry out the phone (and especially the ports) in front of a fan. Leave your phone in an airtight container full of silica gel packets (those small packets you get inside new shoes and bags), or another drying agent. This helps absorbs the moisture. Do not charge the phone until you are certain it’s dry.
Let the device air dry for at least 24 hours before turning it on again or plugging it into power, or else further damage may occur.
24 to 36 hours (or 1 to 3 days) is enough time for the rice to attract and draw the water out of the phone. If it is still on, turn it off immediately and leave it off. It’s way too late for anything else either. Don’t put your iPhone in rice – there are better ways to de-moisten your mobile.
With your phone plugged in, press and hold both the volume-down button and the power button at the same time for at least 10 seconds.
If you see a red light, your battery is fully discharged.
Charge your phone for at least 30 minutes.
Press and hold the power button for a few seconds.
On your screen, tap Restart.
Despite what you’ve heard, putting your phone in a container of uncooked rice won’t dry out your phone, and might actually do even more harm than any good. Dust, starch, and small grains of rice can get lodged in the mechanisms of your phone. Instead, use silica gel packets.
Use instant oats it is more absorbent than rice. Put your phone in a position where the water can easily drain out and let it sit in the instant oats for 2-4 hours
In fact, it is quite common for a phone to initially work after it has been dropped in water and dried out. Then 2, 3, or 4 weeks in the future the phone stops working. This is because the moisture in the phone isn’t really gone. It is trapped inside and corroding the metal.
It will bypass the liquid detection and allow you to try and charge it. This is to remind you that there may be water in your charging port and your iPhone may be damaged. However, you will have the option to continue charging if you are in an emergency. I would recommend that you take the lightning cable out.
In conclusion, to avoid electric shock and any damage to your phone or tablet, do not charge it while it is wet or in an area where it could get wet. Do not handle the device, charger, or cords with wet hands while charging. Do not insert any object into the charging port and don’t put your phone on charging if the port is wet. This can result in damage to the charging port.
If you like the article “how to get water out of the charging port”, then don’t forget to share it with your friends.