Wood fence calculator

Wood Fence Calculator

Wood Fence Calculator helps you to determine the length and quantity of pickets, posts, and rails needed to construct a wooden fence. Additionally, it will determine how big a posthole is and how much gravel, concrete, and nails are needed.


Check out the lumber weight calculator to determine the weight of the lumber. This page contains affiliate links; I just wanted to let you know. If you purchase something from them, I get a tiny commission. If you decide to purchase one of these links, I sincerely appreciate it. - Jake

This calculator is predicated on:

  • The length of each fence section (the distance between posts) is the same.
  • less than 8 feet in fence height and section length
  • The calculator’s maximum fence length is 200′.
  • Rails are 24 and posts are 44.
  • For a more aesthetically pleasing appearance, cover the post concrete with grass or topsoil. Check out the post hole calculator for a more reliable post install approach.

:eight_pointed_black_star: How to Build a Fence?

1 Measure the distance between the posts.
2 Measure the horizontal distance between the goal posts and subtract the clearance needed for the thickness of the hinges and latch.
3 Measure the distance between the rails
4 Assemble the frame
5 Install Center Rail
6 hang frame
7 install latch
8 Attach the dowels to the frame.
9 Wait a few months before staining or painting to allow the wood to dry completely.

:balloon: How to install vinyl fence panels?

  • Use fence posts. Secure the fence end to end with garden stakes, including corners and all gates.
  • We mark the design and dimensions of the fence.
  • planning jobs
  • Highlight notification points. Installation of a vinyl fence on a slope requires the use of a stepped method: the fence is gradually raised on the slope so that each

Installing the fence posts Dig a hole for the first post in the corner of the fence. Laying gravel. Install the first fence post. Build a mound at the base of the fence post. Adjust the height between the posts with the string. Repeat with the rest of the messages.

:eight_pointed_black_star: How to Use the Wood Fence Calculator

:eight_pointed_black_star: Dimensions of the Fence

Determine the length and height of your fence first. The fence’s height is calculated by measuring it from the bottom to the top of the pickets. Typical wood fences range in height from 4.5 to 8 feet. The next step is to choose the picket width. Narrower pickets will give the fence a more detailed appearance, while wider pickets might give the fence a more contemporary appearance.

:eight_pointed_black_star: Picket Distance

Choose whether you want a space between pickets, just for aesthetic purposes. More privacy is achieved with fewer gaps, but less light can also enter. If you choose to have gaps, make sure they are small enough to keep desired objects within and undesirable objects outside.

The size of the space between the ground and the bottom of the fence pickets must then be determined. This space is crucial to stop the pickets from rotting before they should. 1 to 2 inches are the typical gaps under fences.

:eight_pointed_black_star: Fencing System

Then, choose how to fasten your fence rails to your fence posts. Toe or face nails may be used to attach them to the posts. The image above shows a diagram of toe-nailed rails.

:eight_pointed_black_star: How to Install Fence Rails

The next step in constructing your fence is installing the rails, sometimes referred to as stringers, once the posts have been set. Fence boards are frequently attached to fence rails, typically two-by-fours between or across posts.

:eight_pointed_black_star: Study Fence Layout

There will be top and bottom rails on every fence. Having a horizontal rail for every 24 inches of height is a general rule of thumb. This entails three rails for a fence that is six feet high.

Although it might not be structurally necessary, a central rail will help keep fence boards in place and could prevent warping and twisting. A top rail and cap rail will work together to keep the fence from drooping and bowing over time.

A middle rail is not required if your design specifies that the fence boards be installed horizontally.

:eight_pointed_black_star: Place Markers Along Rails

Make a mark for the location of the rails beginning at an end post. At least six inches should separate the bottom rail from the ground. This makes it simpler to mow the grass if it is present and keeps the boards out of the ground’s dampness, reducing rotting.

The rail placements should be transferred to each post using a mason’s line and line level since it is doubtful that the ground would be precisely flat. Use a square to transfer the marks to the right side of the post if the rails will be installed between posts. You can either run the rails parallel to the slope of the hill in sloped landscapes or maintain the rails level and space them farther apart between each set of posts in a stepped pattern.

:eight_pointed_black_star: Install Fence Rails

The most popular and straightforward ways involve using galvanized fence brackets, nailing, or screwing the rails directly to the post with rust-free fasteners. A fence bracket holds the two-by-four rail between the posts in an open U shape.

To avoid side-to-side pressure, two-by-fours can be positioned either wide- or narrow-side-up (to limit sagging). The best setup for strength and durability is a top rail with the narrow side up and a cap rail with the broad side up.

Rails should only be seen inside your yard, depending on the design. This improves your home’s exterior appeal and increases security by making it more difficult for someone to scale your fence or take a sneak peek inside your yard. Therefore, make sure to do so on the side of your fence that faces the outside if you’re laying rails over fence posts.

A quick tip: Position the joint near the center of the fence post if the rails cross the post. The fence will be stronger if you use longer sections since you can rotate placement so that not all joints are on the same post.
You will have completed more than half of your job once the rails are up. The operation next moves on to attaching fence boards to the rails.

:beginner: Summary

Use guide blocks, commonly called cleats, instead of measuring and marking each rail on each post. Use blocks of the necessary length to position the next rail for installation once the bottom rail has been installed level.

:eight_pointed_black_star: How to Measure Your Yard for a Fence

Before constructing a fence, you must purchase the necessary supplies. You must measure your yard to get the correct supplies. You must carefully measure and plan if you’re doing your own construction. The measuring will be done if you hire a fence business in Portland. But before you hire a fence builder, you might wish to perform some preliminary calculations. You can set a budget and connect with the fencing provider with the help of measurements.

How to measure your yard for a fence is as follows:

:eight_pointed_black_star: Track Down Property Lines

The boundaries of the land must be verified. Don’t depend on a hunch. Your fence might need to be taken down if it is built on the neighbor’s side of the property line. It’s a costly error that occurs more frequently than you might imagine. Have a land surveyor have a look or check county records.

:eight_pointed_black_star: Look out for utility lines and obstructions.

You must make plans around any trees or other fixed features if you have them. Additionally, you’ll need to locate subsurface utilities. Gas, electric, and cable lines are some of them. Visit the Utility Notification Center or dial 811 in Oregon and Washington. When someone is sent to your property to mark the locations of utilities, the center will let you know. It is a complimentary service.

:eight_pointed_black_star: How to Calculate Your Yard’s Fence Size

The preliminary work is now over, so it’s time to measure.
Mark uses a stake to corner. Panels converge at a 90-degree angle at the corners.
The area’s perimeter should be measured in feet. Stakes should serve as a guide. Find a helper to make things simpler so the tape may be pulled taut.

:beginner: Summary

By the dimensions of the fence panels you intend to purchase, divide the perimeter. The standard panel size is between six and eight feet. You may calculate the answer to determine how many units you’ll need to fence the area. You can omit the division if you build a bespoke or chain-link fence. All you need to know is the perimeter sum.

:eight_pointed_black_star: How Much Does a Residential Fence Cost?

Residential jobs are billed per project or linear foot, while larger jobs are billed per acre or miles. A 100 foot chain link will cost $900 to $3,000 to install, a 200 foot chain link will cost $1,800 to $6,000, and a 300 foot chain link will cost $2,700 to $9,000. A picket fence, commonly known as a fence, can cost between $2 and $4 per foot.

This fence is ideal for areas where digging is difficult. A heavy non-electric fence can cost about $1-2 per foot, while an electric wire fence can cost $1-2 per foot. With posts and other necessary hardware, DIY aluminum railing materials can cost $8 or more per linear foot, depending on the height, style, metal thickness, and the number of posts and gates, or $1,000 for $100 and $3,500 for finishing $ 10,000. 300 dollars.

:eight_pointed_black_star: How Do You Calculate Fence Materials Cost

If you want to leave your fence alone, you can calculate these costs yourself. Just add up the cost of all the materials needed to make the fence and divide it by the number of feet you want it to stretch. Be sure to bring any additional equipment you may need to purchase. A fence can cost an average of $2,000 to $8,000 per installation, depending on the material, style, height, and length. Understanding the price differences between materials and styles will help you efficiently select the right fence for your home.

If installed professionally, a semi-residential or residential wood fence can cost $8-100 or more per foot, and a simple 6-story wood fence usually costs $10-$30 per foot, $1000-$3500 per 100, and $3000 per $10,000 per foot. Calculate materials for a StickBuilding fence with individual fence components. First, calculate the number of fence sections. Several rail sections = total linear feet/width of each rail section.

Fence Calculator Equations If you want to know how they calculate how much fencing material you need, here is a list of the equations they use: Number of posts = (length of fence/distance between posts) + 1 (round up).

Now that you have the answers, you can determine how much fencing material you need. Follow the instructions for your installation method. First, calculate the number of fence panels. The number of fence panels = (total project length in feet - gate width) / fence panel width. Second, calculate the number of posts.

:eight_pointed_black_star: How to calculate the volume of a fence post?

Barrel pile volume = pile radius² * pile embedded height * π (radius = ½ pile diameter pile embedded height = ⅓ pile length) Walkway volume = (3 * pile radius)² * pile embedded height in inches * π fence estimates. Number of slats = total project length in inches / (actual slat width + slat spacing). Finally, you can calculate the number of carrier rails. Click here to download the single fence calculation chart for free!

If you’re wondering how they calculate how much fencing material you’ll need, here’s a list of the equations they use: number of posts = (length of fence/distance between posts) + 1 (round up) number of sections = # # number of posts one post length = fence height *.

:eight_pointed_black_star: How do you put up a wooden fence?

Starting at one end of the planned wood fence, dig a hole 1 to 2 feet deep near the perimeter of the posts. Use the length of one of the panels to trace the next hole and continue along the entire length. When you’re done, mix the cement according to the instructions. The best fence materials depend on the type of fence you need for your garden or space. Security fences are best constructed with metal or wire mesh, while wood or vinyl can be the best for privacy fences.

You can choose the cheapest way to build a fence, depending on your needs. For a temporary fence, you can use old fencing materials, barbed wire, woven bamboo, etc. Set the Fence Line - Run a piece of string between each end of the fence to form a straight line where the fence will be. Mark Post Locations - Mark the location of each fence post at desired intervals (usually every 8 feet) along the rope.

:eight_pointed_black_star: How do you put up a fence post?

Placing fence posts in concrete Place posts in concrete when stability is of great importance. Prepare the fence posts. Dig a big hole. Add a few inches of gravel. Hang a pole. Repeat for each post hole. Add more gravel. Mixing concrete. Fill the hole with concrete. Level the concrete, giving it a sloped shape.

Raise the vinyl fence rail enough to slide over the top of the wood post. You may need a chair to stand on to have enough room to place the slide on the pole. Position the vinyl gate pusher so that it is perpendicular to the post. Place the post cap over the railing and press firmly.

Installing the Plank on Soil or Gravel Try this method if you have dense soil. Choose a strong fence post. Prepare the wood for moisture (optional). Dig a hole. Fill the hole with gravel. Place the pillar in the hole. Fill the hole with compacted gravel or soil. It ends with a small hill.

Divide 80 by 8 to get a result of 10, which is the measurement of the room’s width in linear feet. To find the circumference, add two measurements of length and two of width. For a room that is 8 x 10 feet, the perimeter is (8 x 2) + (10 x 2) or 36 linear feet. The Cost of a Wooden Fence Per Meter and Running Meter Estimate $8 to $16 per foot of wood needed to build a fence. The most important cost factor is the type of wood you choose. If you work with professionals, they will take care of it for you.

:eight_pointed_black_star: How much does it cost to install a fence?

The cost of lumber and materials ranges from $ to $ per linear foot, and professional fencing costs an average of $5 to $10 per linear foot to install. When building a wooden fence, subtract the overlap of the planks from the width and divide the result by the length of the fence. Multiply the number of slats by the height of the fence to determine the number of slats or legs needed.

:beginner: Summary

The picket fences cost compared to vinyl, metal, and fine mesh. Installed wood fencing costs $21 to $30 per linear foot, compared to vinyl fencing at $25 to $40 per linear foot and chain links at $8 to $15 per linear foot. Common Fence Height: 3ft front yard, 6ft backyard, 4ft pool fence, 8ft deer fence.

:eight_pointed_black_star: Installing a Wire Mesh Fencing on a Slope

When leveling or installing wire mesh fencing on a slope, ensure that the maximum distance between the posts is 10. This applies if you are on a slope. You also need to ensure that the line bets are higher than normal. Wire mesh fencing is the safest option regarding reliability, strength, and cost. While more and more traders opt for a visual barrier when installing privacy fences, a wire mesh fence offers more protection and prevents intruders from hiding.

One way to extend a wire mesh fence is to add material to the top. This is one of the easiest ways to make your fence higher, as you don’t have to do anything with your old fence material. One material that works well in this situation is welded wire. Security fences are best constructed with metal or wire mesh, while wood or vinyl can be the best for privacy fences. If you’re looking for a low-maintenance material, vinyl is the way to go, but in terms of aesthetics and durability, wood, brick, or stone is the way to go.

  • Plan your fence.
  • Install shelving.
  • Confirm the hardware.
  • Install the top rails.
  • Attach the tension cable.
  • Crochet the chain link.
    Secure It With Fence Ties Use fence ties along the top rail and line posts to keep chain straps flat and secure.

For a bulk project with zip code 47474 and 25 linear feet, vinyl fencing installation costs start at $$ per linear foot. To build a wood fence, first, determine the desired height of the fence, mark the corners by inserting stakes and tie all stakes together with twine. Determine and mark the locations for the support posts and dig holes with a hole for the post.

Cheap alternatives to outdoor fences. Bamboo fencing Using bamboo to build fencing is a simple and reliable alternative to traditional fencing. Bamboo is a fast-growing and invasive species, making large quantities cheaply available in many parts of the country.

:eight_pointed_black_star: The Cheapest Type of Fencing

One of the cheapest types of fencing is wire mesh fencing. You’ll pay only $6 to $9 per foot (in 2010) for this type of fencing material if you’re building a 4-foot-tall fence, but the downside is that wire mesh fences don’t look as good.

PVC vinyl fencing is also usually hollow in the center, except for the posts, which may have wood or metal reinforcement in the center. This makes it light but strong and cheaper than composite fencing. Composite fences, on the other hand, are solid planks, making them durable and less prone to damage such as cracks or splinters.

Typically, a pre-assembled vinyl fence panel will occupy an 8-foot section of the fence line, but sometimes you’ll find 6 to 4-foot sections. Panel heights generally follow traditional 4-, 5-, and 6-foot fence height standards, although 7- and 8-foot heights are also commonly available.

:eight_pointed_black_star: What are the different types of wooden fence panels?

  • cedar fence. Cedar is a softwood native to the northwestern United States and Canada.
  • pine fence. Pine is a conifer that is native to many parts of the United States.
  • Oak fence. Oak is a hardwood species that occurs in about 600 species.
  • Cypress fence.
  • mahogany fence

Steel or electric rope fencing is one of the cheapest horse fencing materials and the easiest to set up and take down. The cost of this type of fence depends on the type and number of wires used and the choice of electric fence. For example, operating an awning costs nothing.

Decorative pool fencing is the most respected choice in the fencing industry. These barriers, made of aluminum or steel, are beautifully decorative and ensure good air circulation. It also gives the reclining bather an unobstructed view and, at the same time, offers the necessary safety. Most fencing professionals charge per linear foot, including labor and materials. The range for a new close can be between $1,900 and $5,000. On average, most homeowners spend about $3,000 on their fence, depending on the type and materials used.

Aluminum fencing is one of the most popular types of basic fencing. Wooden fences are the most popular type of PVC fence. A PVC fence is ideal if you want to fence your property cheaply. A wrought iron gate is perfect for homeowners who want their gate to look classic and ornate. Consider the following important factors when calculating your final cost: Materials Fence materials range from $5 to $35 per linear foot, depending on the materials chosen. Most homeowners spend between $8 and $15 per foot. Labor, The average labor cost to install a new fence ranges from $5 to $15 per linear foot. Permits Fencing permits cost an average of $40 to $150.

:eight_pointed_black_star: Fence cost calculator

While the average fence costs $2,700, you can spend anywhere from $1,000 to $10,000 or more, depending on the size, type, and style. The materials alone cost between $7 and $30 per linear foot. A standard length of 150 feet will cost between $1,000 and $4,500.

  • Number of fence panels = (total project length in feet - gate width) / fence panel width.
  • Number of positions = number of panels + 1 + number of doors.
  • Several rail sections = total linear feet/width of each section.

:hammer_and_pick: Frequently Asked Questions - FAQs

Following are the most frequently Asked Questions about the Wood fence calculator.

1- How do you calculate fence materials?

Divide the total number of feet of fencing by ten and subtract one. Add one for each corner post that will be used to determine the total number of line posts needed for the project. These are smaller diameter posts used to support the fence along each section and should not be more than 10 feet apart.

2 - How do you install a wooden fence?

The main work is installing a wooden fence in favorable conditions of the site. Post development. Dig post holes to 3. Drive wooden posts into concrete at eight intervals. Install two horizontal rails between posts and nail six boards about six high and six wide to the rails.

3 - What is the cheapest fence to install?

Vinyl-coated wire mesh is the cheapest yet most durable metal fence. You can install it yourself with a stapler, and it costs less than vinyl screens, but it’s not as aesthetically pleasing or durable. Despite vinyl siding, the product will rust over time.

4 - How much does installing a wooden fence gate cost to install?

Hiring a carpenter to custom-build a wooden door can cost between $35 and $75 per hour. Wooden fence gate installation costs $4 to $8 per linear foot ($20 to $60 for single gates and $50 to $125 for double gates).

5 - What is the average cost of a fence installation?

The average cost of installing a fence The cost of a wire mesh fence. Chain link fences generally cost between $5 and $15 per foot, depending on height and style, and are the least expensive. 4 The cost of a wooden palisade. Six the cost of a wooden fence. The cost of a four vinyl picket fence. Six costs of a vinyl fence. The cost of an aluminum fence.

6 - How much does it cost to install fencing?

The cost of installing fences depends on many factors. The average fence installation cost is usually between $1,000 and $10,000.

7 - How much does it cost to build a privacy fence?

The Cost of an Individual Fence An average 150-foot privacy fence costs $2,750, and the average range is $1,500 to $8,250. Generally, this will cost you between $10 and $55 per linear foot. They spend $750-6,000 on materials and $750-2,250 on labor.

8 - How to calculate for a fence?

Fence Posts - Posts are usually spaced 8 feet apart. Number of posts = fence length / 8. Racks are usually sold in 8 or 16-foot sections. Sections that are more than 8 feet apart will sag. Gates: If the fence has gates, they should be 8 feet long and placed between the posts.

9 - What are fencing materials?

Materials for metal fences are aluminum, steel, and wrought iron. Wrought iron is the most expensive and rarest metal fencing material, but it is also highly decorative and durable. Installing a wrought iron gate is not particularly difficult, but the gate sections must first be cut and measured to a certain length.

10 - How do you calculate fence materials prices

Multiply the number of slats by the height of the fence to determine the number of slats or legs needed. Click here to see the full answer. How much does a fence sign cost? 6-foot board-on-board fence panels cost $11 to $16 per panel.

:notebook: Cocnlusion

Pour it around the post to the top of the hole. Let dry for 24 hours. If you are not using cement and are replacing a wood post, add a small amount of gravel to the bottom of the 6-inch (cm) hole, fill the hole to the top, and tamp. Metal posts do not need gravel. Hoover Fence has over forty years of experience in the fencing industry. Their fencing expertise ranges from all phases of residential fencing to the most demanding specification-based industrial fencing.

:link: Related Articles

1 - Wood fence panels

2 - Building a wood fence

3 - Wood fence styles