**Three quarter of inch** means it could be written as **3/4 inch** or **0.75 inch**. It is also said as “three fourths of an inch” or “point seven five inches”.

## INCH

In British imperial and United States customary systems of measurement, inch is a unit of length. An inch is equivalent to 1/36 of a yard. Inch is abbreviated as “in” and symbolized as ″(denoted by double prime or double quotes) and foot by a single prime which is same as apostrophe. For example, 5 feet nine inches can be written as 5′ 9″. The word inch is derived from Latin word “uncia”, which means “one-twelfth” of a Roman foot. In old English inch was called as “ynce” or “ince”. Inch is associated with the word “ounce” (Old English: ynce). A man’s thumb is about an inch wide, and in past, it was sometimes used to define an inch. In the early 14th century, during the rule of King Edward II, the inch was defined as three grains of dry, round barley placed end to end length wise, it is also defined as the combined length of 12 poppy seeds. Then in 1959, an inch has been defined officially as 2.54 cm.

In many countries, inch is used as a unit of length. In United Kingdom, it is used for road signs and related measurements of distance. In most of the continental Europe and Japan, inch is used to measure display screens. It is commonly used to identify the inner diameter of tires, diameter of vehicle wheel rims. An inch is similar to 1/12 of a foot. In metric SI (System International) Units, inch is exactly as 25.4 mm.

### MEASUREMENT OF INCH

If you are trying to measure things in inches, then the best way to do so is to use a tool that has inches marked on it; usually measuring tape, rulers or yard sticks are best to measure inches. Rulers are used for the short distance measurement, while yard sticks are better for the objects that are 1 to 3 feet or 0.30 to 0.91 meter long. Measuring tape is used to measure the distance around a curve object; it has the ability to bend.

Other than this, one inch is also equals to the top knuckle of thumb to the thumb tip. Four inches is approximately equals to the width of palm, which is 10 centimeters.

Some common items, often seen in our daily life around office desk or at home, and have one inch length are:

A standard paper clip is one inch long.

Eraser.

Light switch.

Sharpener. etc.

SUMMARY:Inch is the measuring unit of length, which is equals to 25.4 mm. An inch can be measured by various methods, by using scales, measuring tape or yard stick. Thumb’s top knuckle of a person is exactly same as one inch.

## WHAT IS A QUARTER?

A quarter is 1/4th, which is one out of four equal parts. It can also be written as 0.25 or 25%. Quarter is a loanword - a word which is adapted from the foreign language with a little or no modification - which is taken from Old French “quartier”. The meaning of the word, quartier, is “a fourth part”. One quarter is actually 1/4th of an object; this means one piece, and here three more pieces are required to make a “whole”.

## THREE QUARTER OF INCH

Three quarter of inch means three out of four parts of inch. This can also be written as 3/4 or 0.75 inch. In percentage form, three quarter is said to be as 75%. Every time when we talk about quarter, it indicates four, so quarter inch means four parts of inch. Therefore, three quarter is also called as “three fourths”.

One inch is equivalent to 25.4 millimeter. To convert inches to millimeter, we will simply multiply the value of inch with 25.4 and we will get our answer. For example,

- To convert half of inch (1/2 or 0.5) to millimeter following procedure will be followed:

0.5 x 25.4 = 12.7

So, 12.7 mm are present in half of inch.

- One third (1/3 or 0.333) of inch is equals to

0.333 x 25.4 = 8.466 mm

- One quarter (1/4 or 0.25) inch is similar to 6.35 millimeter. Mathematically,

0.25 x 25.4 = 6.35

- Now, converting the value of three quarter (3/4 or 0.75) of inch to millimeter:

0.75 x 25.4 = 19.05 will be the answer.

- 1/8th inch is equals to:

0.125 x 25.4 = 3.175 mm.

And, this calculation goes on…

## INCH TO FOOT

Foot is the unit of length in the imperial and US customary systems of measurement. Its plural is “feet”. It is abbreviated as “ft” and symbolized as single apostrophe which is ′ (also known as single prime). One foot is exactly same as 0.3048 meters, which is 30.48 centimeters. The unit of measurement is known as foot, because it was basically based on the length of a foot.

One inch is defined as 1/12th of foot exactly, which is 0.833. To convert inches to foot, we will divide the value of inch by 12. Following are some inch values which are converted into feet.

- 1 in = 0.833 ft
- 1/2 in = 0.041 ft
- 1/3 in = 0.027 ft
- 1/4 in = 0.020 ft
- 3/4 in = 0.062 ft
- 1/6 in = 0.013 ft
- 1/8 in = 0.010 ft
- 1/10 in = 0.0083 ft
- 2 in = 0.166 ft
- 3 in = 0.25 ft
- 4 in = 0.333 ft
- 5 in = 0.416 ft

And so on…

## USING THREE QUARTER IN A SENTENCE

Few examples of three quarter using in sentences are as follows:

- The box is three quarter of an inch thick and half a pound of weight.
- Three quarter of country’s business men signed the agreement.
- She wore a dress of three quarter length sleeves.
- The view from roof at night with three quarter moon is so beautiful.
- He is three quarter of miles away from my house.
- Our presentation will take about three quarters of an hour.

ABSTRACT:Quarter is one of the four parts. We can say it as 1/4th, 0.25 or 25% of any object. Three quarter or three fourth means three of four equal parts, which is same as 0.75 or 75%.

## FREQUENTLY ASKED QUESTIONS

### What is the difference between a quarter and a half?

One half in the fraction form is written as 1/2 or in decimal form we can write it as 0.5, while one quarter is 1/4th of an object or as a decimal, we can say it as 0.25 part of any object.

### What is the half of 3/4 cup?

Three fourth cups is equals to 12 tablespoons. The half of 3/4 cup is same as the half of 12 tablespoons, which is 6 tablespoons.

### How many cents is three quarter?

Three quarter is same as 0.75. Cent refers to 100. So, by multiplying these values we can find out the answer. Mathematically:

0.75 x 100 = 75.

Three quarters in percentage is written as 75%.

### What is millimeter?

Millimeter is the unit of length in the metric system. Its SI unit is “mm”. It is similar to one thousandth of a meter and one centimeter is equal to ten millimeters. One millimeter is equal to exact 5/127 which is 0.03937 of an inch.

### How many inches are there in 5 cm?

1 inch is equals to 2.54 cm. To find inches in centimeter, we will divide the value of inch by 2.54. 1 cm is same as 0.393 inch. Likewise,

5/2.54 = 1.968

So, in 5 cm there are 1.968 inches.

## CONCLUSION

We can say that three quarter inch is equivalent to 0.75 of an inch or 75% of an inch. Quarter is one fourth part of any object, and inch is a unit of length which is equals to 36th part of a yard. Many things in our daily use are 1 inch in length. The conversion of inches to millimeters, centimeters, foots and in other units is very simple.

## RELATED ARTICLES

How many cups in 16.9 oz?

How many cups in a quart?

How much is 168 cm in feet and inches?

Pounds per square inch (PSI)