Cabinets are one of the most popular cabinet styles in home and kitchen remodeling because they can change the look of any room from bland to sharp in an instant. But what do you do when your cabinets need to be replaced? Reface them instead! Refacing cabinets don’t require replacing, which can get expensive and time-consuming, but still gives you an updated look and feel. Here’s how to reface cabinets to get started on your kitchen update!
How to Reface Cabinets
The process of cabinet refacing starts with the cabinet doors being removed and replaced with a new, primed door panel.
A hand-held electric planer will help you sand down the entire face frame and sill plate. Next, cut any necessary holes for things like microwave ovens or plumbing pipes and apply some adhesive to them before putting them back in place. Now it’s time to paint!
You’ll need a latex primer, followed by at least two coats of high-quality semi-gloss paint. For added protection, you can also purchase a water-based, washable polyurethane varnish that will resist heat and moisture.
After painting and waiting for your cabinets to dry completely before replacing any doors or hardware, it’s time for a final inspection! Does everything look straight? Are there any gaps or cracks? Do you love it?
Once you’re happy with your refaced cabinets, it’s time to put them back into service! Your kitchen will look new, and you’ll be glad you took on such a large home improvement project.
You should be able to buy doors for as little as $25 per door, and a can of good-quality primer or paint costs about $10.
If you plan your work, use proper equipment and follow directions carefully, you’ll have clean-looking refaced cabinets that will easily pass muster with even a picky landlord or home inspector. Plus, they’ll last longer than if you had replaced them completely!
How To Reface Laminate Cabinets
-
Use a furniture marker and pen to draw a square around the cabinet face that you want to remove.
-
Cut off the old laminate using an electric saw.
-
Sand down the edges of the cut-out section, so they are smooth and even.
-
Apply new adhesive from an aerosol that can spread evenly over all surfaces inside and outside the square (excess should not be visible) where you plan to attach your new laminate.
-
Press your new laminate into place and smooth down. Allow it to sit for at least 10 minutes.
-
Secure your new laminate with finishing nails and a nail.
How to Resurface Cabinets With Paint
Resurfacing your kitchen cabinets with paint is a cost-effective and relatively easy alternative for a significant cabinet overhaul.
The process may take a little longer, but it requires minimal maintenance and has almost no limitations as to what you can change about the appearance of your cabinetry. All you need is a good quality primer and some paint.
To apply the first coat of primer, brush an even layer over all surfaces of the cabinet doors with light strokes from left to right or vice versa.
Allow the primer to dry for 24 hours before applying a second coat. It would help if you didn’t rush; you want your primer to be completely dry and ready for your top coat of paint.
Paint your cabinets in two coats. One coat won’t give you a perfectly even finish, and two are better than one. One coat won’t give you a perfectly even finish, and two are better than one. If you’re using high-quality paint and applying it correctly, you should be able to complete your project in one day.
How to Reface Cabinets Diy
-
With a bit of time and effort, you can quickly update the look of your kitchen with a fresh coat of paint. Here are three steps to take when refinishing your cabinets:
-
Remove hardware, drawers, doors, and hinges - If you want to repaintthe inside and outside of the cabinet, remove everything that will be painted, including doorways and hardware.
-
Clean cabinets - Remove all dirt or grease from cabinet surfaces with a soft cloth and mineral spirits before painting.
-
Prime - Apply a coat of oil-based primer if your cabinets are made of wood. If they are made of particle board, apply a coat of primer intended for use on particle board.
-
To prevent peeling, sand between each coat with fine-grit sandpaper or sanding sponge. Allow each coat to dry completely before applying another one.
-
Apply paint - Apply several thin coats of color rather than one thick coat. Drying between each coat will help prevent peeling, which can occur when you apply too much color in a single application.
-
Avoid using a roller or brush full of too much paint, as it can cause splotches in your final look.
How to Reface Cabinets with Veneer
Give your kitchen a facelift with new cabinet doors. We can install new cabinet door panels that match the existing style of the cabinetry, or you can choose an entirely different design for your remodeling project.
When installing new veneers, we use high-quality sheets of laminate, plywood, or MDF cut into the size and shape of each panel (or door) to create a pattern on the front.
Consider using a faux veneer kit if you want a more affordable solution. These kits provide high-quality panels ready for installation, with detailed instructions that walk you through every step of installing them.
Our team will help you choose veneer in a style that matches your cabinets as closely as possible, so it blends seamlessly into your kitchen or bathroom when finished.
In addition, you can choose between matching or contrasting veneer when you are ready for new cabinets.
You can even consider adding an overlay of different veneers on your existing cabinetry if it has sentimental value and you don’t want to replace it entirely.
At Showcase Kitchens & Baths, we use a wide variety of wood and wood-like products that provide realistic appearances and excellent durability.
| You’ll need a latex primer, followed by at least two coats of high-quality semi-gloss paint. | After painting and waiting for your cabinets to dry completely before replacing any doors or hardware, |
|---|---|
| For added protection, you can also purchase a water-based, | It’s time for a final inspection! Does everything look straight? |
| Washable polyurethane varnish that will resist heat and moisture. | Are there any gaps or cracks? Do you love it? |
Reface Kitchen Cabinets Before and After
-
The first step is making sure that you measure correctly. This can be done by laying the new face cabinet overlay on top of the cabinet and making any necessary adjustments. Next, remove any hinges, pulls, or other hardware that is already attached.
-
Remove any door and drawer faces from the inside of the cabinet and any shelf runners. Once this is done, spray a protective coating over the front surface of the cabinet to protect it from debris during the finishing process and let dry before proceeding with the installation.
-
If you’re installing a new door, you will want to measure from where your old hinge used to be, not where it would be now.
-
Consider that when measuring for a new hinge location if you are hanging a door and your old hinge was in a corner that is no longer present.
-
Once your hinge locations are marked, use a stud finder to locate where your hinges need to be drilled. Ensure you are at least two away from any wall or obstruction.
-
Next, measure 1 1⁄2 from both sides of the hinge location and mark pilot holes (about 1⁄4 in diameter). You will want all of your holes drilled before installing any of your doors, so now is an excellent time to prepare all necessary holes on each door front. Now you are ready for installation!
Cabinet Refacing Kit
Cabinet refacing is a fantastic way to give your kitchen a new look without spending too much time or money.
This project aims to put in all new hardware, doors, and drawer fronts while changing the molding on the cabinets.
Don’t worry if you’re not sure about how to start the process–follow these simple steps! Measure the height and width of your cabinets with a tape measure.
Be sure to take note of any screws holding them together; they will need to be removed so they can be replaced with new ones.
Label each cabinet door with a number before removing it from its hinges, then detach it from the cabinet by loosening up any screws holding it in place.
You’ll want to take off both the face and sides of each door because those parts will be replaced during this project.
Remove any doors or drawers from your cabinets. Label each one with a number and detach it from its hinges before removing them entirely from your wardrobe.
You’ll want to replace these parts because they will be made of different materials, so you can’t use them with your newly refaced cabinets.
Problems with Refacing Kitchen Cabinets
Wooden kitchen cabinets can be refaced with a smooth surface that will look fresh and modern and is usually more resistant to moisture damage.
Refacing cabinets requires a little more skill than painting, but they can last decades longer than typical paint jobs.
A single coat of primer will block the old finish before it’s sanded down; then, one or two coats of stain or paint are applied, finishing with the primer again.
It takes a bit of time and expense, but it is well worth it if you plan to live in your home for several years.
Refacing also makes it easier to sell your home down the road because you will not need to replace all your cabinets when you move. You can ensure that any new homeowner facelift or has them refaced again.
Another advantage of refacing is that it’s easier on your walls. You don’t have to worry about damaging paint or wallpaper because you aren’t removing any layers from your cabinets.
Summary
Check out this quick tutorial if you’re interested in giving your kitchen a facfaceliftthout spending too much money. In today’s post, we’ll show you how to makeover your kitchen cabinets on the cheap. Start by removing the existing cabinet doors and take them with you when shopping for new ones. You can choose any style or design, but be sure they’ll work with your refrigerator height.
Frequently Asked Questions
Some Important Questions For Your Knowledge:
Is it possible to reface kitchen cabinets myself?
Refacing kitchen cabinets does not require a lot of know-how or experience, but it requires the right tools and tools materials. Follow these steps and tricks on how to reface kitchen cabinets yourself!
- To do a reface cabinet, you need to have experience in basic woodworking, such as cutting, trimming, and gluing/nailing.
- The hardware must be removed before beginning with a cabinet reface.
Refacing kitchen cabinets is worth it?
Is it worth it? This is a common question for those considering cabinet refacing. The answer depends on your cabinets’ age and condition, as well as personal preference. Refacing cabinets can range from $2,000-$10,000+. It’s hard to put a price tag on aesthetics regarding your kitchen remodel. Ultimately, you get what you pay for in this world, and with such an investment, the decision shouldn’t be taken lightly.
Refacing cabinets or painting them is cheaper?
Painting cabinets is much cheaper than refacing them, but both methods have their own set of pros and cons. For example, one potential downside of painting them is that you might need to paint over the old color several times before it gets perfect. This can lead to a lot of wasted paint or overspray. Other disadvantages include uneven results and fingerprints on shiny surfaces.
What’s better: refacing the cabinets or rrepaintingthem?
To answer this question, you first need to assess your overall goal for the cabinets. Does your plan involve adding a unique look? If so, then perhaps refacing the cabinets would be your best option. You are refacing entails removing the old veneer from one set of cabinets and replacing it with a new one. This option is less costly than rrepaintingthem and more labor intensive.
What is the cost of refacing a 10x10 kitchen?
Generally, the cost of refacing cabinets starts at $1,000. Depending on your cabinet size and style, you could spend as much as $5,000 or more on refacing. The main price differences will come from the style and material used. There are a variety of ways that you can reface cabinets - painting is one way, but the veneer and wood overlay are also popular choices.
Lowe’s refaces kitchen cabinets?
As discussed in the last blog post, Kitchen Remodeling Ideas for a DIYer, when it comes to budgeting for a kitchen remodel, you need to think about the fixtures and appliances first. Lowe’s Home Improvement has some great options for kitchen cabinets that are affordable and easy to install yourself.
Is it expensive to have cabinets professionally painted?
Sometimes you want a change in your kitchen but aren’t ready for all new cabinets. At times like these, you can change the look of your kitchen by painting the current cabinets. This can be a very budget-friendly way to freshen up your kitchen and give it an updated look.
Refaced cabinets last for how long?
We have some advice if you consider refinishing or refacing your kitchen cabinetry! We have some advice if you consider refinishing or refacing your kitchen cabinetry! We have some advice if you’re considering refinishing or refacifaceliftitchen cabinetry!Refacing cabinets can add value and excitement to any kitchen. The good news is, they last a long time–upwards of ten years or more.
Is it possible to paint kitchen cabinets without taking the doors off?
Kitchen cabinets are often the focal point of a kitchen. If yours look dated, it may be time for a face facelift. You’re planning on painting your cabinetry; you’ll need to remove the doors from the cabinet faces before continuing. You can purchase door blanks that cover where the doors go and frame them or leave them out altogether. This choice is dependent on what look you’re going for.
Conclusion
After thoroughly cleaning and sanding, get started by determining the perfect combination of paint or stain, primer, varnish, sealant, and wood putty. Make sure all the surfaces are dehydrated before beginning your project. Then pour the material of your choice into a can of liquid stirrer for easier application. Pour half of it into the bucket for the top coat and the other half into another container for the bottom coat.