How to Open Sentry Safe Without Key?

How to open sentry safe without key? As a first step, remember that a locksmith’s services are always available. A locksmith can swiftly gain entry for you by using various methods, including picking the lock, recutting keys using a code system, or imprinting the keys.

How to Open a Sentry Safe Without a Key? – Easy Steps in No Time

Do you need to know how to crack a sentry safe if you don’t have the key? Use two paper clips to fashion a tension tool and a picking tool. The first paperclip goes into the lock’s bottom portion and the second into its top portion. One at a time, turn the first one clockwise while jiggling the other. After pressing the pins, you need to spin the paper clips counterclockwise three times.

Opening a sentry safe is simple without a key or combination if you know what you’re doing and have the correct equipment. A new set of keys for your sentry safe is not required to get access to your valuables. Looking in your toolbox, you can determine if you already have the necessary tools for the tutorial. You may either borrow them from a friend or borrow some from a nearby store if you don’t already have them.

1. Clipboard fasteners

Sheets of paper may be clipped together using a special wire called a paper clip. Nonetheless, it may be molded into a picklock and used to open locks since it is both flexible and sturdy. Large paper clips are required; however, they must be the right size for the lock.

If a large paper clip is too big for the lock’s keyhole, a medium or tiny one should do the trick. However, they must be sturdy enough to withstand the pressure inside the lock without breaking. If they still exist, you should use pliers to take off the plastic coverings.

You can substitute thin metals if you don’t have paper clips on hand. Find out if they can be bent with pliers and inserted into the lock’s keyhole. Unfortunately, some small wires don’t have smooth edges, so they might be dangerous to work with if you’re not careful.

2. Pliers

To transform the paper clips into a tension tool and a picking tool, you’ll need pliers. Due to the small size of the things you will be handling, you should not use heavy-duty pliers that might damage the paper clips. Use thin tools, like needle-nose pliers, instead.

Needle-nose pliers, also known as long-nose pliers, are characterized by their elongated jaws and pointed nose. It may be used to sever, grasp, and shape wires. A sharp wire cutter near the pivot point can sever even thick cables. A spring-loaded opener is included for the convenience of use.

Ensure the jaws and blades of the needle-nose pliers you intend to use align. You should also try holding it up to a light source. No light should be able to get through any cracks. If that’s the case, it’s time to find a new pair of pliers. You may also use your bare hands to bend the paper clips if you don’t have any pliers. Don’t rush since slipping paper clips might cause cuts.

3. A pair of gloves

Wearing leather gloves is a good idea while you work with the paper clips to make the tension and picking tool. For safety reasons, this type of glove is commonly used by workers in the automotive and construction industries. Leather gloves are useful because they protect the hands without compromising the grip.

Having a poor grip on the lesson materials might be avoided if the leather gloves you chose didn’t fit your hands snugly. In contrast, wearing too small gloves might make your hands feel cramped and unnatural. Cowhide leather gloves, pigskin leather gloves, goatskin leather gloves, deerskin leather gloves, sheepskin leather gloves, horsehide leather gloves, and buffalo leather gloves are just a few examples of the wide varieties of gloves available. The goatskin one is the toughest of the bunch.

Note: Especially when handling thin metal, nitrile grip gloves are preferable to leather gloves because of their superior grip. Their use also enhances one’s skill when handling little items. In addition, they are more agile and have a smaller physical footprint.

How to Open a Sentry Safe Without a Key?

1. Use two paper clips to fashion tension and picking tools.

Using pliers or your hands, bend the longer leg of the paper clip to create a 90-degree angle, creating a tension tool. When you’re finished, shape the opposite end of the paper clip into what may be a wrench.

A picking tool must be fashioned with the second paper clip serving as a handle to turn the lock. To do this, separate its legs and bend the first one to an angle of 180 degrees while the second is bent to 45 degrees. After positioning the picking tool in the upper portion of the lock, insert the tension tool into the bottom.

Following the completion of your picklock, the tension tool should be placed in the lock’s base. Start by inserting the picking tool into the lock’s upper portion, where the teeth are often found. Putting the paper clips where they need to be in the first stage of the process.

2. Jiggle the other paper clip while turning the first clockwise.

The tension tool may now be turned clockwise while the picking tool is jiggled. As you wriggle it into the lock’s teeth, take care to apply a sufficient amount of power. Do this until you hear a click, and then stop. You are going to unlock the door.

3. Insert three pins and rotate the paper clips clockwise.

If you heard a click when you pressed the lock’s pins, you know it’s time to push them three times and flip the paper clips clockwise. You should keep trying to open the sentry safe if, at first, you are unsuccessful. Without damaging the lock during picking, you may still use the lost key to your sentry safe later.

Ways to Open Sentry Safe without a Key

Sentry Safe has excellent safes if you need to store valuables somewhere safe. Yet it is conceivable to misplace or forget to bring the keys. If this happens, there are many options for breaking into the sentry safe:

You Must Ask For A New Key Replacement.

If you’ve misplaced the only key to your sentry safe and don’t feel comfortable breaking into it, you may order replacement keys directly from the maker. If you’ve lost the key to your Sentry Safe, you’ll need to provide the model and serial numbers to the manufacturer so they can send you a replacement. Visit the Sentry Safe website to view the instruction manual for identifying the safe’s make and model.

Contacting customer support by phone can also be an option if they have any advice on where to locate the numbers. Once you have that, you may submit a key recovery request on the website. To get replacement keys, you’ll need to provide the safe’s model, serial number, and the desired quantity of keys. After 7-10 business days of verifying and comparing your information, we’ll send you to brand new keys.

The safe may be opened with a paperclip.

In most situations, Sentry Safe is as secure as it appears. However, the safe may be opened, and a paper clip is one of the simplest tools. You’ll need a lot of time, a paper clip, and two basic lock-picking tools to get inside the safe. Needle-nose pliers are also useful to have on hand. Read on to learn how to open the safe using a paperclip.

  • First, using pliers or your fingers, spread the paper clip apart and make a 90-degree bend on the wider end.

  • Second, shape the remaining paper clip into a wrench shape.

  • Third, bend the legs of another paper clip at 45 degrees and 180 degrees, respectively; this second paper clip will resemble a feeler pick and function as the handle to spin the Sentry Safe lock.

  • Fourth, insert the first paper clip into the safe lock’s lower region to appear like a wrench.

  • With the feeler pick, insert it into the upper part of the lock, where the teeth are.

  • Turn the lower clip counterclockwise while shaking the top clip in the lock’s teeth. Keep doing it until you hear a click, which indicates that the lock pins have been pressed in.

  • Rotate the pins three times and spin both clips clockwise once you hear a clicking sound. In most cases, this will be enough to break open the safe.

Use a Knife or a Screwdriver

An alternative to a key is to use a knife or screwdriver. Only a knife with an extremely sharp tip will fit into the slot for the sentry safe’s escape key. To open the lock, insert the screwdriver or knife and turn it counterclockwise until it fits into the keyhole. The lock can then be opened by shaking or pressing the object up and down.

Put A Nail File To Good Use

Nail files may also be used to pry open safes. Nail files should be made of metal, and it’s ideal if they double as clippers. It allows access to a sentry safe without the use of combination locks. To accomplish this, please follow these steps:

  • In the first step, you’ll take the nail file out of the cutter and hold it, so it protrudes in a straight line.

  • Second, insert the file’s pointy end inside the safe’s lock.

  • Third, shake the file while turning it clockwise, then repeat steps two and three until you feel like the lock will give way.

  • Fourth, when you hear the click that indicates the lock is ready to open, you know you need to jiggle the file in the lock a little more to get it to open. The safe will be opened when the clicking sound comes from outside the safe. When that happens, grab the nail file, and you’ll have access to the safe.

Drill It Out.

Forget about using keys; if the sentry safe doesn’t have any, you may have to resort to drilling. But doing so necessitates breaking the safe, which may not be what you want. You’ll need electric cutting tools like a power drill if you’re set on this approach. To cut the lock, you must first plug in the cutting tools and then drill into the lock.

To shatter the lock, drill right into it. Once the broken lock components are removed, the safe may be accessed. It may be feasible to change the lock. You might try contacting the creator of the clock or a local clockmaker. When using a drill, always be sure to take safety precautions.

6. Use a Rare Earth Magnet to Break Open the Safe

If you have lost the key to your sentry safe, you can use an earth magnet to get inside. You’ll need to get the nickel solenoid from the safe to make this happen. The safe’s lock is made of this metal. To use the nickel solenoid, place the magnet in a sock and set it down nearby. If the safe is working properly, turning the knob will unlock it.


1 - Why won’t the key work in my sentry safe?

If you try to open your sentry safe by turning the key clockwise, you may find that it will not budge. To unlock the door using a key, insert it and turn it counterclockwise. Tumbler damage may be the reason the lock still won’t open.

2 - Can you tell me how to unjam the handle on my sentry safe?

To free a stuck sentry safe handle, push the door inward to relieve pressure, then spin the handle clockwise. While stowing away important papers or valuables, they can become wedged between the safe’s door and the safe’s interior. The door’s pins may be moved easily with a slight inward push.

3 - Why is my sentry safe key not working?

If the appropriate key does not open your sentry safe, but you are sure it is the right key, the problem may be dirt or dust lodged in the lock mechanism. However, before attempting anything, check that the key number matches the lock number. After spraying the lock with Master Lock PTFE Lock Lubricant and waiting for it to work, the debris should fall out. Just try the key in the safe’s lock, and it should open.

4 - Does anyone know how many numbers are in the Sentry Safe password?

The standard number of digits for a Sentry safe’s lock is five. You may, however, reprogram your code in place of the original factory one.

5 - Is there a standard set of keys for all sentry safes?

Every one of the sentry safe’s locks is one-of-a-kind and requires its special combination or key to unlock. No reports of duplicate keys for sentry locks have ever made it to my desk.


Please feel free to forward this post to anyone you know who may be having trouble cracking their sentry safe. In addition, feedback on your time with the tutorial is much appreciated. Sentry Safe is an excellent solution to safeguard important papers and personal items. They can resist almost everything thanks to their extreme resilience.\

On the other hand, the safe’s owner may misplace the keys. So, how can you get into a sentry safe without a key? A safe is an option if you lose your keys but still wish to access your valuables. Paper clips, screwdriver or knife, nail file, drill, and rare earth magnet all work to open the sentry safe.

Related Articles

1. Best home safe

2. What is safe mode on my phone

3. How to remove safe mode