How To Measure Inseam

How To Measure Inseam - The inseam on pants and jeans is the measurement from the top of the inner leg at the crotches seam to the bottom of the hem (the pant leg bottom). In order to find your inseam, you’ll need a sewing tape measure or ruler, and some pants that fit you well. For this guide, we’ll be measuring on men’s jeans, but women can find their inseam measurement by doing the same thing with pants that fit them well.

How to measure inseam

There are two ways that you can use to take your own inseam measurement. One way is for you to stand on a level floor with shoes off and have someone else measure from your heel, along your inside leg, up to where your thigh meets your torso.

This will be roughly where a pair of pants would end if you were wearing them. Remember to pull one leg slightly behind and lean forward slightly as someone is taking your measurement so that it will be as accurate as possible.

The second way to take your own measurement is also while standing on a level floor with shoes off. Instead of having someone else take your measurement, use a cloth tape or a cloth measuring tape that you can wrap around yourself and pull tight.

Be sure not to stand too straight up and down because if you do, it will add an inch or two onto your final measurement.

If you are using a cloth tape, make sure that there is no slack so that when you hold both ends of the tape together, they form a 90-degree angle.

You want to make sure there is no gap between where your thigh meets your torso and where one end of the tape meets another end.

If there is a gap, then re-measure until you get as close as possible without having any gap between these two points.

Once you have your measurement, it is best to add a half inch or so. That way, your pants won’t be too short.

For example, if you measured 30 inches around your thigh while standing on a level floor with shoes off and with one leg slightly behind, then 32 inches would be a good size to purchase.

Measure inseam for bike

A bike fit is an evaluation of a person’s riding position. Specifically, it refers to adjusting a rider’s position on a bicycle so that they are optimally aligned and comfortable while riding.

Adjustments are made to seat height, seat setback, handlebar height, stem length and angle as well as cleat position and toe-clip or shoe alignment.

A proper bike fit is essential for comfort and performance. If you’re riding a bike that doesn’t fit you, your risk of injury increases dramatically.

When bicycles are sold, they are fit in a limited way by having people adjust seat height and handlebar height, but with careful measurements, adjustments can be made to make a more comfortable ride.

A professional bike fit will take exact measurements of your body dimensions and then use those numbers to adjust your bicycle for maximum comfort and performance.

Note that you need to have a bike that fits your body type and style of riding. If you’re a recreational rider who rarely rides more than 10 miles at a time, spending money on an expert fit is probably not worth it.

But if you’re riding 25 or 50 miles several times a week, or training for an event like your first century ride (100 miles), fit is essential.

A professional fit can help you make sure your saddle height and handlebar height are appropriate for your riding style.

For example, a road bike racer will have a higher handlebar position than someone who rides trails or off-road because they’re typically more aerodynamic while seated.

Measure inseam men

To be able to tell a store that you are shopping for men’s jeans, it is important that you know how to find your correct size and measure a man’s inseam.

Measuring a man’s inseam is crucial, as it allows him to get his right size when purchasing jeans or trousers. It also ensures that he will not have to constantly worry about buying clothing that doesn’t fit well.

Now, you may be wondering how to measure a man’s inseam. Well, there are a few different ways that you can accomplish this task.

You could either use an online measurement tool or purchase an inseam measuring tape from your local clothing store. It is crucial that you obtain an accurate reading when measuring a man’s inseam. This means that you need to use proper posture and hold your body still while taking these measurements.

To find a man’s inseam, you will want to take three separate measurements. The first is from his crotches to his ankle bone.

Make sure that your subject is wearing shorts or trousers when taking these measurements, so that he is not restricted by excess clothing.

This should be done while wearing shoes, as well, so that you can be sure that there isn’t extra space between his feet and the end of his shoes.

The second measurement you will need to take is from his crotches to his upper thigh. This should be done with your subject standing, and he should make sure that his foot is firmly planted on a flat surface so that there is no space between it and the ground. Again, make sure that your subject is wearing shoes, as well as loose clothing.

After taking these measurements, you will then want to measure from your subject’s upper thigh down to his ankle bone.

Measure inseam women

A woman’s body is much more curvy and active than a man’s, so her pant selection must be carefully considered. Women should always go by their hip size when selecting pants.

Wear your favorite pair of well-fit jeans and place a measuring tape on top of them with tabs placed over your front pockets. Then, determine your hip measurement by following these instructions

The hip measurement should be 3 smaller than your pant size. So, if you wear a size 10 jean, you have a 27 hip.

Once you have determined your hip measurement, add 2 inches (5 cm) to account for added comfort and movement.

For example, if your hip measurement is 29 inches (74 cm), your inseam would be 33 inches (84 cm).

Now that you have your inseam measurement, you can start shopping for jeans. Just remember to keep your hip measurement with you so you don’t end up with pants that are too tight or too loose. Measurement tips

While men can usually take their waist measurement and subtract two inches (5 cm) for a good inseam measurement, women need to measure based on their hip size.

If you are petite, with a small frame and short legs, you may only be able to wear a size 4 pant. But if you have long legs, you might fit into larger sizes comfortably.

Measure inseam on pants

Some important points about this topic

  1. Measure your pants or skirt waistband and write down its length. (If you can’t find a ruler or tape measure, you can make one using a piece of paper.

  2. Place a piece of tape on top of your jeans or skirt at where it sits on your hips—this is where you’ll want to hold your measuring stick.) Hold it so that one end is on top of your zipper and line up the other end with how far down it goes. See how long it is.

  3. Now, you have your waistband length. Lay your measuring stick on a flat surface and tape an end down so that it stays in place.

  4. This will be your new ruler for finding out how long your pants are. Have someone else hold it at its midpoint (either on top of their head or against their chest).

  5. Then, tell them to lift their foot so that you can take a measurement. Find out how far down your tape falls, subtract half of your ruler’s length from it, and then write that number down on a piece of paper. This is how long your pants are—the number you write down is your inseam.

  6. If you want to find out how long your skirts are, all you need to do is take a measurement while it’s lying on a flat surface.

  7. Find its waistband length, as well as its length from bottom edge (or widest part) of your skirt down and then subtract half of your ruler’s length from it. This will give you its inseam, too.

Measure inseam shorts

To get your inseam measurement for shorts, find a pair of shorts that fits well. Unfasten and unzip them and lay them on a flat surface, preferably with something underneath so you can easily measure up from.

Place a measuring tape at its lowest setting against your skin on your inner thigh from behind (as opposed to between legs). Measure all around until you reach where it starts again. That is your inseam measurement!

While you can get an idea of your size based on your height, it’s very important that you always check measurements and read reviews.

Each manufacturer has their own fit, so even if two sizes are technically the same for a certain brand, it doesn’t mean they will be for another. The only way to know for sure is by checking both your standing height and measurement for shorts.

Depending on your preferred style, you may need something looser or tighter than your normal waist size. If you’re a man with a muscular build and/or big thighs, for example, slim-fit shorts can be challenging.

While not all jeans will always fit well off-the-rack either (particularly if you have bigger thighs and hips), it’s much easier to find jeans that will comfortably accommodate larger thighs than shorts are.


The term inseam refers to the length of your inner leg from your groin down to where your foot begins. In order to get an accurate measurement, you’ll need a cloth or plastic (not metal) measuring tape and someone else who can help you.

Inseam measurement chart

When shopping for new pants, it can be a little difficult to find your exact fit. Men’s pant sizes are typically given by waist size, but that number won’t help you find a pair of pants with a perfect fit.

To figure out your inseam measurement, grab a tailor’s tape measure and follow these steps: 1. Measure from your crotches down to your anklebone (you can do this inside or outside of your leg depending on how comfortable you are). 2.

To find your pants size, take your waist measurement and divide it by 2. That number is your pants size (for example, if you have a 32-inch waist, then your inseam would be 16 inches). Of course, it’s always better to try on a pair of pants before you buy them.

Try on your pants. If they are too long, you’ll need to have them tailored so they don’t drag on the ground or bunch at your heel when you walk. If they’re too short, add a half inch of extra material and then hem them up (you can take off an additional inch if you like).

No matter what style of pants you end up wearing, keep these tips in mind for finding a pair that fits like a glove: •

Grab a pair of well-fit pants Fold your pants in half lengthwise on a flat surface
Sometimes pants will have the inseam Place your pants on a table or the floor. Aft

Measure inseam youth

Measure inside leg of youth pants with a measuring tape, flat and relaxed. Measure from a point 1/2 inch below crotches seam straight down to floor.

Compare that measurement with manufacturer’s size chart for waist and inside leg measurements. Find pants with an inseam measurement that corresponds closest to your child’s inside leg measurement.

Measure inside leg of pants for men: Measure inside leg of pants for men with a measuring tape, flat and relaxed. Place tape measure level around your waist, or at your natural waistline, above your belly button.

Find pants with an inseam measurement that corresponds closest to your waist measurement. In general it is important to have enough length so that you can move comfortably and bend without restriction.

Measure inside leg of pants for women: The best way to do a tape measurement is by stepping into pants that fit you well and putting them on without zipping or buttoning them.

Using a non-stretchable tape, measure from one waist side seam across your front crotches seam through back crotches seam, down other waist side seam. Compare it with manufacturer’s size chart for waist and inside leg measurements.

What is inseam

The term inseam refers to the length of your inner leg from your groin down to where your foot begins. In order to get an accurate measurement, you’ll need a cloth or plastic (not metal) measuring tape and someone else who can help you.

The inside leg measurements are always different depending on how you take it and they may also be different if you’re a woman or man. To get an accurate measurement when taking your own measurements, stand up straight with your knees slightly bent.

Make sure you are wearing at least close-fit, loose clothing so that your measurement is accurate.

Place a cloth or plastic (not metal) measuring tape around your inner leg, and mark it where it meets up with your groin and again where it ends at your foot. This is how long your inseam is.

If you don’t have someone who can help you measure, or if you want to be more accurate, then you can use a cloth measuring tape.

Place it on a flat surface and find a point where it meets up with your inner leg on one end and is level with your foot on the other. Use a pen or pencil to mark where these two points meet. Then make sure that there are no wrinkles or creases around where your groin area would be when standing up straight.

Measure inseam

For men, there are two ways of measuring your inseam. The traditional way is to stand with a board underneath your feet and mark where your crotches intersects with it.

You can then take that measurement, deduct 2 inches for dress slacks, 3 inches for dress shoes, and 7 inches for boots (and deduct 1 inch if you’re wearing socks), and you’ve got it. Most people don’t actually do this though; they just eyeball it.

If you have a pair of pants on hand that fit well, lay them flat on a table and measure from crotches seam to hem. That’s your inseam length.

Then subtract 2 inches for dress slacks, 3 inches for dress shoes, and 5-7 inches for boots (depending on how tall you are). This will give you an accurate estimate of what size shoe or boot will fit best.

If you don’t have a pair of pants at hand, stand up and put one leg on top of a 2x4 or another flat surface. Make sure your foot is even with your knee; that’s how you want your pants to fit around your legs, at least for boots and cowboy-style shoes.

Measure from where your crotches meets your thigh down to where it meets your foot. That’s roughly what an inseam length looks like.
how to measure inseam


Although we have already given you some tips on how to choose jeans, if you still don’t know what size is right for you, we will give you some specific instructions. Please follow them carefully. We also recommend that you go with a tailor when buying jeans online or off-the-rack. This way, he can help adjust your fit and make sure that your new pair of jeans fits perfectly.

Frequently Asked Questions

Here are some important questions

Is 27 inseam quick?

In standard, the maximum flattering inseam duration for maximum petites must be 27 inches, and whatever longer than that will handiest look exact in case you put on them with heels.

What happens if inseam is simply too brief?

An inseam this is too quick can rub up too excessive, making sitting and walking uncomfortable for the wearer. A quick inseam can even make your pants appear to be high waders.

What is my inseam length?

How to Measure Your Inseam. Start with a couple of pants you already have that fit your needs well and lay them flat at the ground. Carefully measure the period from the crotches seam to the bottom of the leg. THIS NUMBER IS YOUR INSEAM.

What is the inseam for five’11 guy?

Everywhere I look, it appears human beings say for round five"11 top you have to be sporting a pants with as a minimum 32" inseam

How do you measure inseam with out measuring tape?

Measure from crotches to ankle along the inside of 1 leg to discover the inseam on yourself or some other man. If you cannot receive help taking this size on your self, locate the duration on a pair of pants that fit you very well.

Is inseam similar to duration?

Is the inseam length the same as the length size? No. Inseam is the measurement taken from the pubics bone to the ankle, at the same time as duration length is from the waist to the ankle.

What is the inseam for six three?

All our tops are slender and tapered, and we sell jeans, chinos, trousers and joggers in a ramification of suits from a 34 inseam, which normally suits men as much as approximately 6’three" (190cm) and a 36 inch leg will typically in shape men from round 6’3" to 6’6" (190-200cm).

What is a regular inseam?

Broadly speaking, petite pants and jeans usually have an inseam measurement of around 25”-30”. Average denims and pants will commonly have an internal leg dimension of round 28”-34”, and tall pants and jeans will normally have an inseam size of 31”-36”.

Where must straight jeans hit?

A widespread pair of heterosexual-leg jeans must be ankle-period or hit your legs right above your ankles. Straight-leg denims that make bigger past your ankles tend to bunch up and appearance messy.

How lengthy must my legs be for my height?

It’s due to the fact her high-quality legs are proportionally lengthy in comparison to her small frame. For instance, if a women measures five’-four" tall with an inseam leg measurement of 29", her legs would then be 45 percentage of her basic peak. This 45 percent is taken into consideration the proper share for having common leg length.


There are a variety of ways to measure your own inseam if you do not have a pair of cloth or steel measuring tapes available. Most men can use one of three simple methods: Stretched, High water mark and Calipers. Use whichever method suits you best. You should ideally use two different methods so that you can compare them and get an average measurement, rather than using just one method twice.

Related Articles

  1. Pants Inseam

  2. Inseam measurement pants