How Many Feet Is 170 Cm

170 Centimeters is equal to 5.5774278215 feet 170 cm in feet, and inches is similar to round about 5.58 feet and 6.93 inches. The first result of converting 170 centimetres to feet and inches has been rounded to two decimal places. Still, the second figure for converting 170 centimetres to feet and inches has been rounded to the closest inch.


A centimetre (SI symbol cm) is a unit of length in the International System of Units (SI). It equals one-hundredth of a meter since centi is the SI prefix . It was the base unit in the CGS system , which is no longer used.
Technicians often prefer SI prefixes for factor 103, such as milli- and kilo-, for many physical quantities. However, the centimetre is still a valuable length for many everyday measurements.

Difference between centimetres and Inches

To put it more succinctly, one centimetre is equal to 0.01 meters, 10 millimetres, and 0.3937 inches. According to the metric system, one inch is equivalent to 2.54 centimetres. This is the connection that exists between inches and cm. Put another way, the distance expressed in centimetres equals the length defined in inches multiplied by 2.54 centimetres.


The equivalent in feet and inches of 170 centimetres is about 5.5774278215. One hundred seventy centimeters equals approximately 5.58 feet and 6.93 inches when converted to feet and inches. The initial result of converting 170 centimetres to feet and inches has been rounded to two decimal places. In contrast, the subsequent value for translating 170 centimetres to feet and inches has been rounded to the nearest inch.
Difference between feet and inches
One foot is equivalent to roughly 0.0833 inches. Therefore one inch is equal to approximately 0.0833 feet, or one foot is equal to 12 inches. This enables one to comprehend the relationship between inches and feet.

Convert meters to feet and inches

Step-by-step instructions on how to convert meters to feet and inches
One meter is a unit of length equal to about 3.28 feet. 12 inches is like one foot. One meter is similar to 3.288398950131 feet if you need to be very exact. When this number is close to 3.28 feet, you should use the more manageable number to make math easier.


A centimetre is a SI unit of length (SI). Centi is the SI prefix. For 1 / 100, hence it equals 1 m. The centimetre was the CGS systsystem’se unit of length.
One centimeter = 0.01 m, 10 mm, 0.3937 in. One inch is 2.54 cm in metric. Inches and centimetres are related. Inches multiplied by 2.54 centimetres equals centimetres.

Instructions to convert meters into feet

Step 1 to convert meters into feet

First, turn meters into feet.
1 meter = 3.28 x feet, so,
1.7 x 1 meter is equals to 1.7 x 3.28 feet, or
1.7 meters is equals to 5.58 feet.

Step 2 to convert meters into feet

Turn decimal feet into inches.
You might not understand an answer like “5.5” feet" be" cause you might want to write the decimal portion, which is in feet, in inches, which is a smaller unit.
So, put all after the decimal point (0.58) and multiply it by 12 to turn it into inches. Then,
5.58 feet = 5 feet + 0.58 foot. Once 0.58 foot times 12 = 6.96 inches, or 5.58 feet times 12 = 5 feet and 6.96 inches. This is the same as 1.7 meters.

Step 3 to convert meters into feet

Change the decimal inches to a fraction of an inch that can be used.
The last step gave you the answer in decimal inches (6.96), but how do you measure it with a ruler or tape? See below for a way to convert decimal inches to the nearest proper fraction, which can also be done with a calculator:

Converting from meters to feet:

Following is how to use the meter-to-feet converter:
First, insert the metemeter’sding in the input box.
Two, hit the “Sol” e" bu" ton to obtain the answer in feet.
Third, the converted feet and meters will be shown in the output field.

What Does “Met “r to Feet” Me” n?

Distances measured in meters can be converted into feet-equivalents using the meter to feet formula. Length can be defined in terms of both the meter and the foot. One meter is the standard international measurement for height and distance. “m” “s” is the traditional symbol. The character “ft” “st” nds for the feet or foot, which is the US standard unit of measurement.

Measurement Conversion from Meters to Feet

About 3.28 feet may be converted into meters.
A meter is equal to 3.28798951 ft.
Multiply the given meter value by 3.28084 feet to get the corresponding foot value.
Hershey’s to convert 5 meters to feet, for instance:
To convert 5 meters to feet, we multiply the number by 3.28084.
For instance, 5 meters is equal to 5 times 3.28084 feet.
5.15 m = 16.4042 ft
This means the equivalent of 5 meters in feet is around 16.4042 ft.

How Many Meters Are There in Feet?

Following is the metric equivalent of the feet conversion:
One meter is around 3.28 feet in length, as we all know.
This means that a foot is equal to a fraction of a foot and a half, or 1/3
1 ft = 0.3048 m
Because of this, 0.3048 meters is about equivalent to one foot.
The conversion from 10 meters to feet is 32.8083 feet, for instance.
32.8083 feet equals 0.3048 meters; thus, multiplying by that amount gives us the metric equivalent.
Okay, let let’s it another shot with the same illustration.
32.8083 ft = 32.8083 x0.3048 m
32.8083 ft = 10 m
Therefore, if you need to convert 10 meters to feet or vice versa, you should use the value 32.8083 feet.

Convert decimal to fraction

a) Take six away from 6.96, which is the number of whole inches:
6.96 - 6 = 0.96. This is the part of the inches value that is a fraction.
b) Multiply 0.96 by 16 (it could be 8, 16, 32, 64, etc., depending on how exactly you want to be) to get the number of 16th16th’shes:
0.96 x 16 = 15.36.
c) Round up or down to the nearest whole number:
Round(15.36) = 15
1.7 meters is the same as 5 feet and 15/16 of an inch.
In short, 1.7 meters is 5’6, 5’616 inches.
(*This result is different from the calculator above because we assumed that 1 meter was equal to 3.28 feet instead of 3.2808398950131 feet).

How many feet are 170 and 175 centimetres (cm)?

When adjusted to the next decimal place, 175 centimetres equals 5 feet and 8.9 inches. One foot is equal to 30.48 centimetres. It is estimated that males in the United States have an average height of 175.4 cm, about 5 feet 9 inches. The typical size of a woman is 161.7 cm, equivalent to around 5 feet and 3 1/2 inches.

Frequently Asked Questions

Here are some quizzes about How Many Feet Is 170 Cm.

Q1:How many centimetres is 5 feet 11 in?

The measurement of five feet eleven inches (11 inches) is equivalent to 180.34 centimetres. This is because one foot is equal to 30.48 cm.

Q2:How many centimetres is 5 feet and 4 inches?

On the behalf of following reasoons 5 feet 4 inches tall, this indicates that you are 64 inches tall: There are a total of 12 inches in each foot. Thus the length of 5 feet would be equal to 12 multiplied by 5, which would be 60 inches. You now have 64 inches after adding the last four inches to the total.

Q3:How many centimetres is 5ft 12 in?

It’sIt’s the same as being 6 feet and 0 inches tall if you’reeet and 12 inches are tall. Input can also be given in the rows below, for example, in the “met “rs” co” an—example 1.60 meters.

Q4: Difference between a meter and a centimetre?

When determining the length of an item, the metric system uses the centimetre as the unit of measurement to utilize. It is written using centimetres. One meter is equal to one hundred centimetres. 10 millimeters make one centimeter.

Q5:What precisely is the length of a meter?

A meter is a standard metric measurement roughly equivalent to three feet and three inches. It is one hundred times larger than a centimetre , equal to one-thousandth of a meter. A kilometre is 1,000 meters.

Q6:What does the sign for an inch look like?

Keep in mind that ymbol for inches is the double prime (″), not double quotation marks (“) o” straight quotation marks (“) o” (gasp!) two single quotation marks in a row (“).” ## Q#7:What is the abbreviation for feet?
The symbol “ft” "is "used as the foot in the IEEE standard. The foot may be marked by a prime, which is frequently approximated by an apostrophe, and a double height may denote the inch; for instance, 2 feet 4 inches may be marked as two ′ four ′′ in some cases.

Q8:Why is a measurement of 12 inches considered afoot?

There are twelve inches in one foot. This measures out to exactly 30.48 centimetres. The length it was initially based on was that of a foot, which is why it is referred to as a foot.

Q9:Why does a foot consist of twelve inches?

At first, the Romans counted their foot in 16 digits, but subsequently, they changed the system such that it matters in 12 unciae (which in English means ounce or inch). In the 16th century, Jacob Koebel described the technique used to validate a foot.

Q10:How come it’sit’ssured in inches?

An inch is a unit of measurement used in British Imperial and United States Customary systems. One inch is equal to one-thirtieth of a yard. The term “uni” co" es from the Old English ince, which was derived from the once, which was derived from the Latin unit uncia, which was “one” twelfth" of "a Roman foot, also known as a pes.


It would be approximately 5.5774278215 feet and inches if 170 cm were expressed in feet and inches. In terms of feet and inches, 170 cm is equivalent to roughly 5.58 feet and 6.93 inches. The original number obtained by converting 170 centimetres to feet and inches was rounded to two decimal places, and the following value acquired by performing the exact conversion was rounded to the closest inch.

Related Articles:

How Tall Is 163 Cm In Feet
How Tall Is 67 Inches In Feet

How Many Feet Is 170 Cm

170 cm several feet

No, I said you are 56 years old :)

How Many Feet Is 170 Cm