| Decoder Off is displayed when the receiver is not receiving an audio bit stream from the playback device. If you are not playing anything, the screen should indicate that the decoder is off. This is normal and not a defect.
Decoder Off is displayed when the receiver is not receiving an audio bit stream from the playback device. If you are not playing anything, the screen should indicate that the decoder is off. This is normal and not a defect.
In many cases, premature shutdown of the device could be due to a problem with the speaker cable between the receiver and the speakers. A single wire in the wrong place (causing a short) will cause the device to shut down at very low volumes.
Reset / initialize the RXV571 receiver to factory settings
- Put your device into sleep mode by pressing the power button.
- Hold the right button and press the power button.
- SP IMP.
- Press the right soft key repeatedly until INITCANCEL appears.
- Press the right button repeatedly until INITAL appears.
- Press the standby button to turn off the receiver.
Pulse Code Modulation, abbreviated to PCM, is a form of digital signal used to represent analog data. Depending on the TV model you are watching, switching the audio output to PCM can improve the sound quality from the TV speakers.
Yes, PCM is uncompressed sound, while Dolby Digital is compressed at the expense of room quality. Dolby TrueHD, on the other hand, is a lossless audio format, like a zip file, which is theoretically identical to PCM (I won’t go into this discussion). It’s like asking if CDs sound better than MP3s.
An integrated receiver / decoder (IRD) is an electronic device capable of acquiring and converting digital data sent by a radio frequency signal. An integrated receiver / decoder is also known as an integrated receiver / decoder.
Pulse Code Modulation
You can enable or disable the Audio Return Channel (ARC) function in the receiver setup menu. Make sure you have ARC enabled. Press ON SCREEN on the Yamaha remote, go to Setup and select HDMI. Select ARC from the HDMI menu and turn it on.
Press the PROGRAM button on the left or right on the front of the receiver until Update USB appears in the display. 6. Press the INFO button on the receiver to start the update process. Please be patient (or have a cup of coffee) - the update can take up to 20 minutes to install.
In many cases, if the unit has shut down prematurely, there may be a problem with the speaker cable between the receiver and the speakers. A single wire in the wrong place (causing a short) will cause the device to shut down at very low volume levels.
HDMI ARC stands for High Definition Multimedia Interface Audio Return Channel. ARC enables both upstream and downstream signals on a single HDMI connection between the TV and all ARC-equipped A / V devices. In this way it is possible to operate all the common functions of the connected device with a single remote control.
Reset system settings:
The memory protection system of our receivers blocks or prevents changes to certain parameters in the defined menu system, as well as to certain DSP parameters. This prevents accidental changes to the system.
Setting up the RXV673 receiver Back to factory settings
Press and hold the right button and then press the start button until the menu appears. Then turn off the receiver and it will reset to factory settings.
per calendar month
Dolby Digital and DTS lose digital compression algorithms that encode one or more PCM channels into a bitstream for storage and then decode the bitstream into one or more PCM channels for playback. Dolby Digital and DTS can encode 8.3GB PCM audio up to 800MB and suffer a slight loss in quality.