WHIRLPOOL F5E3 CONVERTIBLE WASHING MACHINE ERROR. The Cabrio Washer F5E3 error code means the lid lock is not unlocked or the lock is faulty. This error can occur if there is something heavy on the lining of the washing machine, which causes the lining to be placed on top of the lining in a bandage that prevents it from sliding.
Posted: 02/18/2018. @ back2me3 Warning F5 E3 indicates that there is a problem with the lid latch. Do not force the lid to open as this may cause permanent damage.
Cabrio Washer error code F5E2 means the lid lock is not locked or the lock unit is faulty. This error can occur if the lid is not closed completely due to a malfunction.
This error occurs when there is too much water in the washing machine or too much foam in the tub. In this case the water valves close and the pump is switched on for at least 30 seconds.
- Disconnect the washing machine from the mains for 1 minute.
- Plug the washing machine back in, lift the lid 6 times and lower it in 12 seconds. You have 30 seconds to raise and lower the lid.
- The engine has now reset and is ready to start a cycle.
Unplug the washer for 30 seconds to try to reset the Duet washer controls. You can manually unlock the washing machine by removing the top (unscrew the screws on the back of the top and slide the top back to lift it.
E2 errors are displayed on the Samsung washing machine. If the LEDs flash with an E2 error, it indicates problems with water draining. No water comes out of the drum. If the problem persists, a service visit is required.
Restoring a Whirlpool Convertible
Whirlpool front washing machine error codes
At the end of the wash, press and hold the lock button on the pressure washer for three seconds. Listen, and when you hear the unlock sound, open the door.
If E03 appears or an LED flashes three times continuously before stopping and the machine then restarts, the machine is displaying an error code. This E03 error code means your washing machine has had a drain problem.
How to bypass a washing machine lock
The F6 trouble code for this model indicates a speedometer error on the drive motor. The control board is unable to correctly register the motor speed.
The location of the drain pump filter in a Whirlpool Duet washing machine is accessible through the lower access door under the laundry door.
LG WASHER ERROR CODE FE = WATER OVERFLOW ERROR = The drain pump runs continuously when the error code FE is displayed. Most probable solution = replace WATER INLET VALVE.
Whirlpool Convertible Washing Machine Reset:
F5 E1. Lid switch error. Inspection / repair. This code is displayed when you press Start with the lid open.
Faulty safety circuit