| The error codes are alphanumeric codes that appear on the control board and indicate a malfunction of the pellet stove. The E2 code indicates light leak, the E3 code is called overheating and indicates that the exhaust temperature has been exceeded, and the E4 code indicates a drop in the exhaust temperature.
Error code # 2 according to your manual is: container empty, auger discharge error or paper jam, flame containing fuel that caused the fire to ignite or extinguish too slowly, opening the electrical switch or of the low temperature wires.
Pellet stoves require a clean and unstable combustion air flow for safe and efficient operation. Code E1 stands for vacuum leak. This occurs when the exhaust gas flow is insufficient to keep the smoke block switch closed.
The factory settings are 6 on LFF, 4 on LBA and 1 on AOT. In order for your Englander pellet stove to burn well, you burn high-quality pellets.
- Press the Off button on the control panel to switch off the pellet stove during operation.
- Simultaneously press the power button on the control panel.
During the first 15-20 minutes of operation, the digital display shows S U. This is normal and indicates that the oven is in start mode.
If you have a stove with automatic ignition, just turn it on and it will automatically pour the pellets into the fireplace and ignite it. Manual devices require a little more maintenance, but if you burn the pellets properly you may not need to re-ignite for the rest of the season. Fill the pan with wood pellets.
My stove keeps turning off
E3 means the oven will shut down because you are above the upper temperature limit.
There should be 16 inches of space between the top of the furnace of the combustible material and 3 inches from the furnace door. It should not be flammable, like doors or curtains, within 36 inches of the front or sides of the stove.
Adjusting the air intake can solve some performance problems.
Correct positioning, correct installation, fuel quality and scheduled maintenance guarantee optimal and efficient operation of the pellet stove. It is preferable to use the device with lower heating levels such as 2 or 3 than a maximum of 4 or 5.
Compared to a wood stove, a PELLET STOVE is easier to clean. It produces little ash, so cleaning shouldn’t be too messy. Depending on the frequency of use, it should be cleaned every three days or at least every two weeks. Proper cleaning and maintenance are required to avoid malfunctions.
Pellet stoves are known to produce a low hum or hum when lit during normal operation. The rumble simply means that the pellet stove is on and burning. This may not be consistent with changes in combustion efficiency or loss of airflow.
Follow these tips to maximize the heating performance of pellet stoves: Where is the valve on a pellet stove?
On many pellet stoves, the valve is operated with a lever or lever located on the side of the stove or near the top of the fireplace.
Turn the selector to Off, fill the container with granules, turn the food selector to the central position, eg. B. 4 turn the temperature selector to a position and turn the selector to room temperature or oven temperature. The oven will restart.