The most common reason a washing machine does not spin is because it is not balanced. This can be indicated by an Ub or Ur code. Make sure the washing machine is level and your clothes are not resting on their side in the tub. Finally, check the installation of the drain hose and clean the pump filter on the front loaders.
Hanging - If the Samsung top loading washing machine receives an EU or dC error code, there is an unbalanced load problem and the drum is not spinning. This sometimes happens when you have a high load in the washing machine that exceeds the limit.
To run a spin only on a model that does not have this cycle selection option, complete the following steps.
- Turn on the device.
- Press and hold the rotary button for about 3 seconds. A bell rings.
- If necessary, select the spin level.
- Press the Start / Pause button.
To reset the Samsung washing machine, unplug the washing machine from the mains for 5-10 minutes. (Unplug the power cord or turn on the switch in the control box of the washing machine).
If your washing machine fills with water but won’t move, the problem is likely due to a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct drive washers do not have belts.) To diagnose the problem: 1 Check the spin cycle of the washing machine.
If the washer does not empty, it could be a clogged pump or hose. It is common for small socks or other small items of clothing to enter the water drainage system and clog the pump hose or the pump itself. Remove the hoses from the pump to remove clothing.
The most common mechanical reasons a front-loading washing machine won’t spin: The most common mechanical reasons a front-loading washing machine won’t spin are the door lock, water pump, motor, or motor lock.
A broken drive belt or a drive belt that has slipped off the pulley can cause the pulley to vibrate during the wash cycle, yet the drum remains quiet despite the noise of the motor while spinning.
Reset washing machine:
When there is no more water in the washing machine, reset the washing machine by pressing the ON / OFF or START / PAUSE button. So wait a minute before exiting and you can unlock the door. If this works, you will need to manually drain the water from the washing machine to open / unlock the door.
Calibrating the Samsung washing machine will prevent the device from vibrating and making a lot of noise. The washing machine can be calibrated via the screen and takes a maximum of 3 minutes.
Laundry stuck under the tub or between the agitator and the inner tub can cause the washing machine to become unbalanced each time it is loaded. If no problems are found, it may be necessary to remove the front or top cover and the agitator. Remove the offending object and remove any debris.
SAMSUNG WASHER FIX / SOLUTION:
If the washing machine does not start the program or stops during washing or rinsing, there may be a malfunction of the water inlet valve. First check that the inlet hoses are not kinked or kinked and that the inlet sieves are clean.
If the washing machine does not drain all the water and the laundry is still wet, the drain pump may be blocked with dirt or defective. There may be a foreign body in the pump and drain pipe. Check that the drain pump is working properly.
To activate only the spin function on your LG Top device, press the special purpose button. And just choose rotate. Now select the desired spin speed by pressing a spin speed radio button. Please note that the “Do not rotate” option is not available for disc download.
The warranty period for washing machines, dryers and dryers is 24 months.