Replacing deck boards
How much does it cost to repair a damaged deck? Depending on the type of wood you have on your patio, the average cost to replace planks is $750 per wood. $30 for supplies including nails, screws, etc. $500 for contractor to replace wood. On average, it costs $1,280 to repair a damaged rig.
How do you fix deck boards?
Inspect your patio regularly for broken nails, loose railings or planks. Remove and replace fallen nails with coated screws and repair or replace loose railings immediately to avoid hazards. To remove everyday dirt from hardwood floors, wash with water and a mild household detergent. Rinse well.
Can you install new decking over old deck boards?
Can a new platform be installed over an old one? No, it is not recommended. In a lot of patio replacement work, the beams are eventually replaced, repaired or repaired. This is due to the frequent detection of rot under the deck, usually where the fasteners pierced the beam.
How much does it cost to repair a deck?
Hiring a foreman, carpenter, or earthmoving company to repair the deck can cost $100,500 for simple repairs and $500,000 for larger jobs, such as replacing decking and railings, averaging around $1,500, $2,600 depending on local rates. What to do and who does the work is usually cheaper with a professional than with a carpenter or contractor.
How much does it cost to build a new deck?
Often, adding a patio to an outdoor space with a patio is much cheaper than adding an extension to your home. Adding a patio can also add significant value to your home. The average patio cost is between $20 and $50 per square foot, and most will spend between $4,000 and $12,000 to build one.
How much does it cost to replace deck boards with composite
Replacing a patio with compound can cost $ to $ per square foot if you install the new compound yourself, and the cost of replacing the patio with compound also increases as you replace more patio area.
How much does composite decking really cost?
The composite deck typically costs $35 per square foot, but the average cost per square foot for the Trex deck is 7. The total cost of a composite bridge can range from $1,000 to $15,000.
How much does it cost to install a composite deck?
The cost of installing a composite decking can range from $250 to $400 or more per square foot. Costs may vary depending on the size of the bridge, the complexity of the work and additional services such as preparatory work. Composite (or wood-plastic) decking can have a significant initial cost, but the benefits outweigh the costs.
How much does a deck really cost?
A standard deck can range from $2,000 (for decks under 200 square feet) to $15,000 or more (for decks over 500 square feet). Meanwhile, custom bridges and elevated decks can cost up to $36,000.
How much does a repairing a deck cost?
Bridge repair cost factors Labor costs. Expect to pay between $100 and $500 for the job, depending on your location and issue. Repair of bridge barriers. Exploded nails and screws. Anchor bridge ladder. Mold and rot. Mold problems. Pest control. Common problems with floorboards.
How much does composite decking cost to build?
Typical Cost: Composite deck can cost $25 or more for 70 or more per square foot, or $8,000 for $22,400 for a 16x20, depending on the brand, complexity of the project, and whether construction is done by casual workers or a contractor authorized.
How do I repair an uneven ceiling?
Sand the wall with 120-grit sandpaper to remove any dents or residue from wallpaper removal. Use a sanding block to reach higher points on the wall or sand the ceiling. Avoid sanding the seams where the paper tape is visible. After sanding, apply a coat of PVA primer to the wall and let it dry.
How do you repair a crack in a ceiling?
Cover the space with gauze tape. This allows dirt to adhere directly to the plaster, making the repair more durable. If you have a drywall ceiling, you may need to add screws to hold the two halves in place and align the crack on both sides. Apply the solution to the repaired crack.
How to patch a ceiling?
- Think of the volume. Place a cloth under your work area, put on your safety glasses and make a shallow cut around the affected area with a utility knife.
- We glue the cracks.
- Share the connection.
- Primer and paint.
- History of the group.
Cost to replace deck boards
Replacing the deck costs between $10 and $40 per square foot. This is one of the most common repairs, as water or weather conditions can cause planks to crack, break, rot, swell, or warp. Heavily damaged planks will need to be replaced and you may have to pay an additional $200-500 recycling fee to dispose of old planks.
Is it time to replace your deck?
If it takes more than cleaning and another coat of sealer to keep your patio cool, it's time to replace it. Rot - The problem is easy to spot. Wet, discolored wood with a smooth handle that has these properties will rot. You will also notice that the planks give a little when you step on them.
How to repair a deck?
- 1. Use a screwdriver to check the deck and rails for deterioration and replace the damaged wood.
- 2. Raise new planks with curved grain rings to keep them level.
- 3. To remove algae, mold and mildew stains, spray the patio with an eco-friendly cleaner that doesn't require brushing or rinsing.
- 4. To reduce maintenance time for your home in the future, trim shrubs and trees to get more sunlight.
- 5. Keep water out of the deck from sprinklers and drains.
How do you fix deck boards with wood filler
Clean the entire deck first, then apply wood putty to the hole after mixing as instructed. Shipments arrive in containers and tubes, and a container with a shovel may be the easiest way to plug a hole in a wooden pallet. Allow putty to dry for 24 hours before sanding, even with the floor.
How do you fill a small hole in a wood deck?
Scrape the filling into the hole with a putty knife. Press down and apply 1/8 inch more filler if necessary. Continue adding sealant in 1/8'' increments until the sealant is just above deck level. Let the load dry. See instructions for drying time.
Can wood filler be used to repair a rotted deck?
When repairing stubborn rot, use a wood hardener to reinforce the deck before treating damaged surfaces with wood putty. A wooden pallet is not suitable for repairing major structural damage.
Can wood filler be used to repair holes in wood?
The wooden trowel is ideal for filling small holes in wooden surfaces. Articles on the subject. Whether your deck has small nail holes or deeper rotten spots, you can use a wood putty knife to repair the damage. Like epoxy putty or grout, wood sealants enter pipes or tubes and harden when mixed or in contact with air.
How do you thicken wood filler?
Use a putty knife to remove the wood putty from the tub. If your spatula is in a tube and needs to be mixed with hardener, squeeze part of the spatula onto a paper plate and mix with the amount of hardener specified by the manufacturer. Stir both ingredients with a spatula until the mixture thickens.
How do you fix deck boards pictures
Proceed as follows: 1. Calculate the chamfer overhang by adding the desired overhang to the chamfer thickness. 2. Draw a chalk line on the inner edge of the Perimeter Plate. 3. Add up the width of the bridge and fold the edge to make the end plate of the frame.
How do you fix deck boards popping up
When attaching the floor to the frame, keep in mind that the frame dries and shrinks over time. For this reason, Tom recommends using screws that are longer than the material to be fastened. If this breaks the floor, the problem should be solved by replacing the shorter screws with longer ones.
Why does my deck make a cracking or popping sound?
Cracks or clicks can also be caused by moisture between the planks and the joists below. because? When water freezes, it expands. This extension then creates sounds.
What kind of problems can a deck be repaired?
These three easy patio repairs fix minor problems like broken nails or curled boards that may have occurred over time. Even a new deck can show signs of use after a few years. These tips for sprucing up the patio will keep it looking its best for years to come!
Why are my decking boards rubbing against each other?
For example, if there isn't enough space between the planks to accommodate the compression motion in cold weather, some of them will rub against each other under pressure, similar to the friction of the Earth's plates that cause earthquakes.
Why do my nails crack on my Deck?
Wood floor nails shrink differently from the surrounding wood, causing them to suddenly slide and make noise. Cracks or splits can also be caused by moisture between the planks and the underlying joists. because? When water freezes, it expands. This extension then makes sounds.
How do you fix deck boards that are too close together
It depends on how the chemistry got to the edges of the panels. You can do this with a circular saw, but it may take 2 passes to create enough space. Another way to solve the problem is to drill a series of 3/8 or 1/2 holes.
How do you fix deck boards without
Catching this early may allow you to repair the damage without replacing the entire deck. Remove rotten planks and replace them with new pressure treated planks. Apply a water-repellent coating to the entire deck, including the feet.
How do you repair an old concrete deck?
Concrete patio renovation - Upgrade your patio. a
Step 1 - Decide which glue you want to use. Determine which type of glue is most convenient to use. Acrylic glue mix can be used for 2 pieces. be easier to use
Step 2 - Wipe the area to be repaired. 3
Step 3 - Prepare the concrete. Bedroom
Step 4 Apply glue. 5
Step 5 Pour new concrete.
How to install timber decking on top of concrete?
Wooden terraces on concrete
Step 1 : Separation of shares. Simply mark on the ground where each stick will be placed. Make sure when.
Step 2 : Adjusts the height of the patterns. With the platform I'm going to align the top of the platform.
How to install a composite deck by yourself?
Preparing the composite deck installation site is the first step to installing the deck itself. It is necessary to level the concrete surface if it is uneven. It is also important to ensure that water, especially rainwater, can drain easily.
What does this section cover bridge deck repairs?
This section deals with the restoration of the bridge deck in relatively small areas. Major deck repair or replacement must always include project specific drawings and comply with Section 422 Concrete Superstructure.
Can you install decking over old decking?
Installing a deck on an old deck will significantly shorten the life of the material. The joints between the two materials easily retain water in a humid environment. This contact area should only be limited to the tops of the joists so that most of the planks are exposed on both sides.
Can I install composite decking boards on top of joists?
It is not recommended. It is very important to ensure the right conditions for the installation of composite floors and they strongly recommend installing composite panels over a suitable beam system. The main reasons for this are: (a) drainage and (b) air circulation.
Why is it important to remove old decking?
This is due to the frequent occurrence of dry rot under the decking, usually where the fasteners touch the joist. When upgrading a deck with a new deck, be sure to remove the old deck so the joists and beams can be assessed and repaired if necessary.
Can you install new decking over old deck boards and screws
Yes, Trex decking can be screwed or nailed like wood. I would recommend using 3-inch deck screws as the number one deck fastener. These fasteners slide a safe distance into the joists and don't bounce like nails.
How do you attach deck boards to a wood deck?
I added decking to the outside of the deck as an edge board. I put at least one screw through the liner board of each decking board. After all the floorboards were in place and secured, I went through the entire floor and screwed the floor to each joist with two screws.
Should you repair or replace your existing decking?
The existing wooden deck and railings were in poor condition, but the pressure-treated structure remained intact. If your patio is old and dilapidated and maintenance is a nightmare, you don't have to take it apart and start over. There is a good chance that the construction parts are still in good condition.
Can you install composite decking over an existing deck structure?
But with a little planning and foresight, installing a composite decking over an existing decking can be very economical. At the very least, homeowners want to make sure that everything is up to date and that their grills aren't rotting.
Can you replace deck boards on a solid frame?
Replacing a deck board with a solid frame is a relatively easy project, but you should always plan ahead. Since the deck is stretched over the joists, it is important to note where the original edges were if you want to revert to the same deck dimensions.
Can you install new decking over old deck boards for diy landscaping
Instead of tearing down or covering your old terrace, you can place your new wooden or plastic terrace directly on your old terrace. Several companies make composite or exotic wood tiles, such as ipé, which you have just installed and glued. The plastic grids under the tiles allow air to circulate, which prevents the wood from rotting.
How do you lay new decking on manufactured decking?
Profiled sheets are not as hard as wood. Therefore, check the uniformity of the joists before installing new decking. Run a piece of string or a strip of chalk through the joists in the center of the deck. You may need to place spacers under each end of the rope to lift it off the joists. Measure the distance between the rope and each beam.
Can you replace a pressure treated deck without tearing it down?
The old terrace with a massive structure does not need to be demolished. You can remove the worn deck and rails and then replace them with a new, low-maintenance deck and rails - a brand new deck for a lot less money. The existing wooden deck and railings were in poor condition, but the pressure-treated structure remained intact.
Should you cap joists when replacing a deck?
No, it is not recommended. In a lot of patio replacement work, the beams are eventually replaced, repaired or repaired. This is due to the frequent occurrence of dry rot under the decking, usually where the fasteners touch the joist.
Can you install new decking over old deck boards into table
Can a new terrace be built on top of the old one? Yes, any deck can be installed over an existing hardwood floor, even a composite deck.. When placing materials on an existing platform, the latter can directly affect the former.
Can you replace deck boards over the existing beams?
That's why they replaced the floor over the existing beams. Cedar wood is very durable, but will be exposed to inclement weather over time. The greatest damage caused by water was at the ends of the planks, but almost none under the eaves of the house, where they were protected from the water.
What to do with old wood deck boards?
I moved the old floor to my local wood processing center where it was torn down and reused. The pressure treated beams under the old deck were in very good condition. I scraped away the debris and removed the nails that were left on the top surface.
Can you install new decking over old deck boards youtube
The most logical reason to place a composite decking on an existing wooden decking is to save time. But can you? In short, yes you can. It is more than capable of installing composite decking over existing wood planks to save time and money when building a frame from scratch.
Is it time to replace your wooden decking?
Not only does it look bad, but a platform that is running out of time can pose a serious security threat. By replacing a wooden terrace you do yourself and others a great favor. Because wooden decking has a limited lifespan, composite decking is often used because they are much more durable.
How do you replace a deck and railing on a building?
Step 1. Check the distance between the beams and the general condition of the frame to determine if the frame is stable.
Step 2 .After obtaining all required building permits, carefully remove the old pavement and driveway, leaving the substructure and frame in place.
Step 3 .
Is it safe to tile over wood decking?
There is a big difference between ugly wood and wood that needs to be replaced. If your patio is discolored, stained, or looking worn, adding exterior tile to a wood patio can be a great way to hide it and start over. However, if the wood starts to rot or decay, your patio can become dangerous.
Can you put decking on top of other decking?
When placed on other decking boards, the drying potential under new boards is low and faster degradation of old and new boards can be expected. Manufactured products should not be placed on old roofs or hard surfaces and this may void the warranty.
Can you install new decking over old deck boards by jacking
Think of this as a decking for your terrace. Rather than tearing or covering the old deck, lay the new wood or plastic deck directly on top of the old deck. Several companies make composite or exotic wood tiles, such as ipé, which you have just installed and glued.
Can you put composite decking on top of wood?
If your decking is damaged, rotten or unstable, they strongly recommend that you open it up and start over. When you place a new composite decking on these planks, the wooden decking underneath will continue to fail and your new composite decking will eventually collapse.
Can you replace a 5 year old deck with composite?
If your patio is more than five years old, don't replace it with composite materials. Even if you add new beams to the deck to make up for the extra weight of the composite deck, the wood may be too old to support the extra load.
Can you install new decking over old deck boards with composite decking
Installing composite decks is not a problem as most composite decks have a wooden base. However, it is important to uninstall the old platform first for several reasons. Depending on the size of your yard, you can save two to three days of work by installing a new patio on top of the old one.
Are composite decking boards hardwearing?
While composite decking is extremely durable, especially in high traffic areas, they require a little more support from below as they have a low tolerance compared to corrugated wood decking, which are not very flexible. Tip #2: If possible, drain the patio stretcher.
How much is the average cost of deck?
The final price of your terrace depends on the materials used, size, construction level and extra options such as built-in seats or stairs. The average cost to build a patio is $25 per square foot, with most homeowners spending between $4,380 and $10,080 in total.
How much does it cost to repair a deck floor
The simplest repairs can cost between $15 and $75 for those who repair bridges themselves. For example, replace some rotten baseboards or install loose railings.
How much does it cost to repair a deck siding
On average, the largest bridge repairs cost between $1,500 and $2,500. Based on your own knowledge and experience, you can determine whether you can carry out the necessary repairs yourself or whether you need a professional.
What is the average cost of replacing a roof?
However, most roofers (and many insurance companies) charge their roof replacement benefits at $ to $ per square foot or $350 to $500 per square foot of architectural siding installed. One square corresponds to 100 square meters of roof surface. The average size of the roof is about 1,700 square meters.
How much should it cost to replace garage roof?
The cost of replacing a garage roof. Replacing a garage roof costs an average of $1,000 to $2,500, depending on size, slope, and material. Installing a new roof for a 280-square-foot garage for one car costs between $1,000 and $2,000, and a 400-square-foot garage for two cars costs between $1,500 and $3,200, depending on whether it's asphalt or metal.
How much does a roof deck cost?
Ross said a medium-sized deck costs between $40,000 and $50,000 on average, while the construction of a finished cantilevered roof terrace, including railings and lighting, will cost about $1,200 per square foot. , color, everything.
What is the best roof decking material?
One of the best options for flat roofs is PVC roofing, which has proven to be completely waterproof, strong and durable. Roof decks are generally built by placing a layer of waterproofing material between the roof base and the floating deck on top.
How much does it cost to repair or replace wood siding?
The cost to repair a 170-foot damaged sidewalk will, of course, depend on the material. Replacing a solid piece of paneling costs an average of $100,150 per section plus labor. The contractor charges between $40 and $50 per hour. Replacing section 170 of the siding will cost an average of US$600 US$1200 in materials and labor.
How much does it cost to repair a broken deck?
Patio Repair Costs Patio repairs cost an average of $1,826 with most homeowners spending between $762 and $2,892. The total cost will depend on the damaged building material, the extent of the damage and the location.
How much does it cost to fix a dent in vinyl siding?
Aluminum dents can be removed or filled. The total cost to replace a damaged section of vinyl siding averages between $120 and $300. In general, the contractor includes labor costs in the cost per square foot. The average cost of repairing a square foot is between $3 and $20, depending on the type of siding and the extent of damage.
How much does it cost to repair Hardie siding?
Hans Uslar, regional sales manager. James Hardie Building Products, also known as the Hardie Board, charges between $800 and $1,400 for repairing the fiber cement siding. For major damage, install new fiber cement siding for $5,500-18,000. It will cost $600-4000 to renovate stone or brick cladding to renovate a 200-square-foot section.
How much does it cost to repair a deck installation
For a simple homeowner's patio renovation, where the structural integrity of the patio is generally maintained, the average cost is about $100. For decks that experience more serious problems, a homeowner can expect about $1,500, including replacement of railings or planks.
How much does it cost to repair a deck fence
Fence repairs cost an average of $559, with most homeowners spending between $299 and $869. Minimal fence repairs can cost as little as $50, while major damage can cost up to $2,300. The actual cost will depend on the extent of damage, the type of material used for the fence and the cost of labor.
How much does it cost to repair a wooden fence?
The cost of repairing a wood fence depends a lot on the number of posts, panels, and battens that need to be replaced. The average cost to repair a wood fence is between $450 and $650, and the average homeowner spends about $550 per Replacing a 12 foot section of 6 foot post fence panels with studs, equipment and labor.
How much does it cost to replace a metal fence post?
If the renovation involves replacing the posts in concrete or wood, the average cost to repair a metal fence is about $85. Post replacement: $125-200, depending on the type and type of metal. Anchoring to concrete is more expensive than anchoring to wood. Door Replacement: $300 to $600+ depending on door jamb, size, and time required.
Can you repair a fence that has fallen down?
The fallen parts of the fence look ugly; They also leave holes in the fence and damage the support posts, increasing repair costs. If the fence elements are intact, all you need to do is hang them. In other cases it may be necessary to work on the top rails or support legs.
How much does it cost to repair a deck ceiling
Patio renovations cost an average of $1,820, with most homeowners spending between $763 and $2,884. The total costs depend on the damaged building material, the extent of the damage and the location.
How much does it cost to repair a vinyl deck?
It costs between $7 and $30 per square foot to repair two vinyl decks. Vinyl is one of the cheapest materials to make a patio out of, but it can also be one of the least durable materials. This can cause stains, scratches and peeling, which may require stains to be repaired, covered or painted.
How much does it cost to fix a water damaged ceiling?
The cost to repair water damage is about $45 to $55 per square foot, including labor and materials. Repair costs are independent of locating and repairing the leak that caused the damage. A professional will charge for the mold removal on the affected areas of the ceiling.
How much does it cost to replace drop ceiling tiles?
Drop the tiles. False ceiling repairs generally cost less than $200. You can purchase 2' x 2' precast tiles for between $4 and $68 each. A professional will charge $60-$90 per hour for repairs, but in most cases, the homeowner can replace the tile themselves.
How much does it cost to replace a 16x20 deck?
If you ask a contractor to do this work, expect an additional $0.25-0.25 per square foot at an average cost of $80 to $480 per 16-by-20-foot deck. Your contractor may also charge a cleaning fee, which can range from $100 to $200.
What is the price of a composite deck?
First of all, the main role is played by the deck material and size of your future deck. As you saw above, the price of composite decks can range from $9,000 to $20,000. With an average patio price of $7 to $10 per square foot, one can imagine how such a proposal will develop. The next factor is work.
What is a composite deck?
The composite decking is a man-made construction product that contains approximately equal amounts of recycled wood fiber and recycled plastic. Because composite decking is so strong and rot-resistant, it has a much longer lifespan than wooden decking.
What is deck material?
While most of the bridge construction is made of impregnated wood and sometimes steel girders, the bridge itself is the part you walk on. It can be made of wood, plastic (PVC) or composite of plastic and wood fiber.
How to replace a deck board?
- Mark the floor parts to be replaced. Use a carpenter's pencil or pencil to mark which of the old floorboards needs to be removed.
- Removing Hidden Deck Fasteners, Screws, or Nails Attach and remove the deck clips attached to the damaged deck with a pry bar, screwdriver, or drill.
- Check the beams and remove the rotten parts. Inspect the lower beams for signs of decay, aging and water damage.
- Beam Sealer and Sealer Application Apply a thick coat of clear sealer to the damaged beam, allow to dry, then apply a second coat.
- Deck beam reinforcement If necessary, cut and install a reinforcement beam to reinforce the column.
- Joist Fastening Attach the deck strut to the joist and main beam by nailing them with deck bolts or structural fasteners.
- Elaboration of a removable outer deck. Use a tape measure to determine the specific length of your opening and mark the correct size for your decking board.
- Installing a New Deck Install a new decking and fasten it to the joists with galvanized decking screws or concealed decking fasteners.
How many screws do you put in a deck board?
Most deck bolts are 8 gauge, and while 2 1/2" is the minimum length needed to secure the deck to the joists, 3" bolts are often used to provide additional clamping force against the joist deforming them. There are different requirements for special materials for terraces.
When is it time to replace your deck railing?
- It becomes unstable. The railing is designed to protect people or pets from falling from decks, stairs and balconies.
- Your wooden base is warping. Be careful if you have a wooden railing.
- Rust from connections
Should a deck railing be attached to the House?
In most cases, you attach your patio railing to a post on the edge of the patio that is attached to your home. However, creating a position is sometimes not practical. In this case, the last step in installing the patio railing is to secure the patio railing with a pair of railing brackets.
How to install deck railing posts?
- Step 1 : Cut messages. The studs are the same length as the height of the railing plus the width of the beam and thickness of the railing.
- Step 2 : Mark and drill holes. Mark the two holes in the grill, each one inch from opposite sides of the grill, and
- Step 3 : Teeth are cut. For each post, make a notch in the floorboards so that the post fits snugly against them.
How to build a deck railing notch?
Cut the notch with a jigsaw. Start at the center of the railing and work toward the ends, securing each baluster with a template. Support the other end of the balusters with a 1-inch bracket. thick board. Run the balusters 3 inches down your cheek. Bridge screws.
Replacing deck boards with trex
Rebuilding your deck with trex is easy and you can enjoy the results. Composite decking such as Trex or Fiberon composite decking is made from recycled plastic particles and organic wood fibers and then covered with a durable top coat. Remove old wood or composite boards.
Is Trex better than TimberTech?
Conclusion. For example, Trex is significantly cheaper than TimberTech, perhaps because they are more popular and have lower operating costs. Another notable difference is that the Trex composite decking has a protective layer on only 3 sides, while TimberTech has a protective layer on all 4 sides of their product.
What is the difference between Trex and composite decking?
While Trex is light and stain resistant, first generation composite decking tends to: Regular cleaning along with floor cleaning. They are prone to mold, discoloration, stains and scratches.
Can you put new boards over old decking?
However, it is important to uninstall the old platform first for several reasons. Depending on the size of your yard, you can save two to three days of work by installing a new patio on top of the old one. The main reason to avoid this is that the bridge base cannot support the extra weight.
Replacing deck boards on a trailer
Fortunately, it's easy to replace a plate or the entire deck on your favorite Millroad flatbed trailer. Just locate the screws and unscrew the entire board or deck that needs to be replaced. Check your epoxy bolts and flanges to see if you need to replace the bolts or if you have a more serious renovation project.
How do you build a wooden deck trailer?
Most wooden deck trailers are quite simple. They build the frames so that there is a pocket for the shelves in the front, and when the shelves are in place, they weld a piece of angle iron to make a pocket in the back. Then lay the planks one by one.
How do you remove rotted wood from a deck trailer?
The wood in my trailer was so rotten that in most cases only a piece of wood could be broken to remove it. For those who didn't break, they took a circular saw and ran it across the planks (so there were no metal sleepers underneath). Most wooden deck trailers are quite simple.
How much does it cost to replace a 16 foot deck?
This means it has a 16-foot deck and a 2-foot dovetail, making it easy to load vehicles with limited headroom. The only piece made of wood is the 16-foot deck section. To replace it, I had to drive to Home Depot for eleven 2 x 816 foot weatherproof plates (11 @ $ = $).
How much does it cost to replace a 2×8 weather treated board?
To replace it, I had to drive to Home Depot for eleven 2 x 816 foot weatherproof plates (11 @ $ = $). Now the fun begins.