| Cooking speeds up the first pass, but it is still recommended to wait 23 days for light use and 7 days for intensive use. Evaporation / min @ 68 ° F Leave 60 minutes between coats. IMPORTANT! Do not place heavy loads on the surface until the RAPTOR has completely hardened.
Do not allow the RAPTOR to come into contact with water for at least 72 hours. If the RAPTOR comes into contact with water within the first 72 hours, repair it: Make sure the surface is completely dry.
MIX RATIO: 3: 1 Loading area liner substrate: System 20 hardener of your choice Reduction: Recommended 2042 high speed grind system to 10% as required to reduce consistency.
Yes, you can paint over the Raptor liner. UPOL recommends waiting 24 hours to harden, scrape and clean the area before applying a top coat.
In our experience, Raptor Liner is inexpensive, easy to apply, and is ideal as a bedding or undercoat. You can’t get better for this type of protection at this price point and you can paint it any color you want. It’s a winning combination in our book.
Promoter of the RAPTOR grip
I used acetone according to U Pol’s recommendations, but I cleaned the gun immediately after each use and ran the acetone through the manifold and through the gun. Then I wiped the gun with a damp cloth with acetone to clean the beds that were left.
Fire hazard: highly flammable liquid and vapor. Reactivity: Highly flammable liquid and vapor. Fire protection: Do not attempt any measures without suitable protective equipment.
cjgoode. Rhino and Linex will NOT coat the grid that will coat the product on the grid, the operator will not. It is often applied to a primed surface, which the Linex installer does not do, nor can the quality of the primer or underlying metal be guaranteed.
Rhino Liner has a thicker coating than Line X and is therefore a better sound absorber. But smoothness means less strength, so Rhino Liner isn’t as good in tear strength as Line X. Line X has a superior hardening process and is therefore more durable than Rhino Liner.
No. Even if you have some rust, it just covers it up. Rust penetrates the bodywork and usually does not begin as a surface. The coating masks and aggravates the rust.
Yes, the Rhino Linings® underlay dries in seconds, although we recommend waiting 24 hours for heavy use so that the bedding can dry completely.
We conducted a nationwide survey of LineX and Rhino Liner installers and found that the nationwide average installation price was 470.41. That's almost 100 more than a DualLiner (which protects the truck better).
Yes, they both protect your car from damage. However, buying walk-in bedding can cause problems on the street. Dropin bedding is a great choice if you’re just looking for something cheap. These sheets typically cost under 500 and go as high as 50.
Rhino EcoCoat is a waterproof, flame retardant and flexible coating that resists UV rays, shocks and cracking.
If you need to clean the bed with the cover, a gel or universal cleaning liquid may be sufficient. Scrub the liner to remove dirt and debris. Step 3 Rinse with a high pressure hose and let it dry. However, if you wish, you can wipe off excess water with a microfiber cloth.
It is entirely possible to paint on Rhino-Liner. However, for best results, it is necessary to properly prepare the surface to be painted.
RAPTOR bedding and protective cover. RAPTOR is a strong and durable protective coating that creates a protective barrier to withstand the toughest situations. Spray or roll RAPTOR like truck litter or use it to protect industrial surfaces, jet skis, ATVs and more.