| With this remote control you can also control a security + 315 MHz automatic door opener. To program, briefly press the learning (programming) button on the garage door opener. The learning indicator lights up continuously for 30 seconds. Press and hold the button on the handheld remote within 30 seconds.
Remove remote controls and keypads with the LEARN button on the garage door opener
- Find the LEARN button on the garage door opener.
- Press and hold the LEARN button on the door control until the LED turns off (about 6 seconds).
- All previous codes have been removed.
The leather garage door opener button is located above the antenna cable hanging from the motor head, it can also be under a light cover. The leather button is green, red / orange, purple or yellow.
You can program 8 remote controls plus 1 keyboard. I know that having the correct information for this model is very important. You can program up to 5 devices simultaneously on a single door opener. Since you have 1 keyless access and 4 remote controls, you have reached this limit.
How to program the garage door remote control: LiftMaster and Genie
- Find the learn button on the garage door opener.
- Press and release the learning button.
- Within 30 seconds of pressing the learn button, press and hold the button you want to program on the remote for three seconds, then release it.
Change an existing PIN code
A button opens the garage door. The three buttons have one for the door lock (if compatible) and one for the light. I thought so too, but you can also open / close separate doors with each button. My remote was preprogrammed with the big button to open the side of our garage.
After changing the battery
Step 1: Disable the Garage Door Remote
Briefly press the LEARN button on the open garage door opener. The learning indicator lights up continuously for 30 seconds. Press and hold the button on the handheld remote during these 30 seconds. Then release the button when the headlights flash.
All Genie universal remotes can control the most popular garage door openers and garage door receivers brands such as Genie®, Overhead Door®, Chamberlain®, Linear®, Wayne Dalton® and many more! Over time, we will launch more manufacturers, which means the compatibility list can and will change.
In most cases, attempting to program a HomeLink garage door opener without a remote control will not work if the car door is open or the key is inserted. So first make sure the door is closed and the key is removed.
It is very important that when you press the learn button, you press and release it quickly.
How to change the frequency of a garage door opener
Unfortunately, with most remote controls, it is not possible to program a button to operate two doors at the same time. If you have two different garage door opener models in your home, make sure the remote is compatible with both. Universal remotes will work with most models, but standard remotes will not.
If this does not work and you know the battery is charged, the remote control may have lost the programming connection with the garage door opener. If the remote control cannot be reprogrammed, clear all codes by pressing and holding the learning button on the motor unit for approximately 6 seconds or until the learning lamp goes out.
Up to seven remotes can be programmed into one of Genie’s old Intellicode garage door openers. Contains a total of seven Intellicode remotes or six Intellicode remotes plus an Intellicode wireless keyboard. One of the available memories is required for programming HomeLink.