Primo® water can be stored indefinitely as long as the bottles are cool and protected from direct sunlight.
Using a 9-step purification process, we make sure you enjoy fantastic and tasty water. Click here to find out more.
Empty the cold container by running cold tap water in front of the dispenser. Leave the dispenser unplugged and dry it until use.
You should clean the dispenser every three months.
Bottom line: Many people claim that once a water cooling tank is installed, they cannot imagine life without it. It is one of the most convenient ways to access clean, safe, and delicious water. If you only have one in the house, drink more water and it’s worth it.
The cold water thermostat is mounted on the back of the Primo water dispenser. First disconnect the water dispenser from the socket. Do not set it more than a quarter turn, as turning it too much can freeze the water.
Answer: If I have done the math correctly, what you say is $ 2.00 per day, the energy consumption to use the Primo water dispenser is about $ 60.00 per month.
The United States Department of Energy recommends cleaning the radiator every time the cylinders are changed or every six weeks, whichever comes first. Keeping the water clean is the most important part of maintaining a chiller. Fortunately, it takes little time to wash the dispenser, water and bleach or vinegar.
Setting the temperature of a Primo water dispenser Move the Primo water dispenser away from the wall and make sure that the water bottle does not tip over or overturn. Find the brass-colored flat screw on the back of the water dispenser. Turn the screw slightly clockwise for colder water or counterclockwise for warmer water. Check the water temperature.
5 gallons averaging $ 6.99. * Price after delivery of the returnable bottle. Buying the first bottle can cost as little as $ 14.99.
The resulting drinking water is highly pure and tastes healthier than drinking water with no potentially harmful impurities. But … the additional reverse osmosis filtration used in Primo water filters out many microscopic organisms and heavy metals that remain in tap water.
To minimize the build-up of minerals that can clog pipes and release odors and flavors, use only high-quality purified Primo bottled water. Use the self-cleaning function every week to clean tanks and water pipes. To activate, press and hold the self-cleaning switch for 5 seconds and release it.
How to clean a BottomLoader water tank Unplug the power plug. Remove the water bottle. Mix the cleaning solution in the water bottle. Connect the cleaning bottle. Empty the container. Rinse the container. Replace and connect parts. Clean the water drip tray.
To reset, drain a few cups of water from the hot and cold side of the water cooler. Then turn off the switches on the back of the heater. Unplug the water cooler and leave it unplugged for 24 hours. When you turn it back on, you’ll also need to activate the switches on the back.
A flashing red light warns you when the bottle is empty. Replace the vial as soon as possible. WARNING: Do not dispense hot, cold or cold water while the red light is flashing as this could empty the containers and overheat the appliance.
An air pocket may have formed in the inner tube of the refrigerator. To fix this, we recommend that you lift the bottle with the top of the cooler over the cooler and then reinsert it. Then gently squeeze the bottle with a squeeze type.
The water itself comes from municipal sources, but goes through a multi-step purification process that includes reverse osmosis to remove unwanted odors, chlorine, and minerals, including lead. Primo Water’s business model was in fact adopted by the propane industry.