| Your LG dryer is also equipped with child safety locks. The childproof lock can only be activated when a drying program is running. During a cycle, press and hold the appropriate child lock button for 3 seconds.
To do this, turn on the machine and press the spin button until spin is selected. And then start the cycle. This activates the only drain function of the LG windscreen washer system. When the water has been drained, pause or stop the cycle and the door will unlock.
- Switch off the washing machine and unplug the appliance from the socket.
- Find the mounting pins and / or screws that hold the top horizontal plate down.
- Locate the lid lock switch at the bottom of the top cover and where it fits into the device.
- Put the lid back on and plug the washing machine back into the wall socket.
To disable the CHILD LOCK on the LG washing machine, press and hold the CHILD LOCK button for 3-5 seconds. The washing machine should now be in CHILD LOCK mode and all buttons should work correctly. NOTE: For other newer LG front loaders, press and hold the PREWASH / CHILD LOCK button for 3-5 seconds to disable CHILD LOCK.
Perform a hard reset Unplug the washing machine. release, then press and hold the PLAY / PAUSE button for 5 seconds. Reconnect the device. If the device is not turned on, it needs to be repaired.
Reset Control Panel
If you need to drain the water from the washing machine, turn on the machine and press the spin button until spin is selected. Then press Start. If done correctly, the watch will display 1 minute of the estimated time, the device will drain the water and the cycle will end.
To perform the master reset, carefully pull the washing machine out of the socket and let it sit for one minute. After a minute, reconnect the washing machine cable to the wall. Then open and close the washing machine door 6 times within 12 seconds to send a reset signal to all components.
The child safety feature is available on all LG units and models available at retailers nationwide, wrote Burn. Almost all models have a child lock button on the control panel display. Users need to turn on the computer and then press and hold the child lock button for 5 seconds to activate it.
The washing machine needs a hard reset
The signal from your Smart Zone is sent over your home wireless network and our servers analyze the signal to diagnose problems and then relay this information to the smartphone app. To use the Wi-Fi diagnosis, open the LG Smart Range app and then the smart diagnosis function.
The displayed code
CL is not an error code, but only an indication that the child lock has been activated. The child lock deactivates the control panel during operation so that the settings cannot be changed during the cycle.
LG d80 tumble dryer error code shows 80% air pockets. This means that the air outlet of the dryer does not push enough air from the dryer out of the house or apartment through the ventilation opening. Error D80 means 80% of the dryer is blocked in the exhaust air line, wall ducts or outside valve.
With LG’s NFC TagOn technology, you can charge new bikes directly from your smartphone. Just download the app, choose the new cycle and tap or highlight the LG device to download your choice.
To reset the washing machine:
Place a fine, stiff spatula on the side of the lock closest to the strike. Squeeze as hard as you can as you move the fill handle towards the door frame and the fill blade towards the hole in the door handle.
When closing the door, slide the door lock into the door lock on a slider that moves forward and activates an electrical component that locks the door. At the same time, the current is conducted through the barrier to the rest of the machine.