Table bases Make sure that the tongue of the plank is against the wall. Attach the other board to the groove facing the rest of the room and you’re on your way. From the very beginning, do your best forward and move the planks to make the entire floor strong and ready for heavy traffic.
If you lay your floor on the first floor, you will float the floor through all the rooms in the same direction, creating a feeling of cohesion. If you have an open width concept, let the floor run parallel to the longer walls.
Sometimes with wooden floors it is necessary to change direction, for example when you have to enter another room with a completely different pattern, or when you create a diagonal pattern or a floor and start from the center of the room.
Entrance Direction Basically, laminate looks best when it runs in the same direction as the long walls of a corridor. Sight lines on the floor and walls merge and make the hallway seem longer and more spacious.
Wooden floors should always be laid perpendicular to the floor joists - in the middle. So there is no right or wrong when laying parquet. Choosing the orientation of the parquet is more a matter of personal taste and the design of your room.
Start the first row of floors by leaning the planks against the wall with your tongue. He installs the second card next to the first by aligning the tab in the groove and pushing the card down to screw it into place. When you get to the end of the first row, cut the length of the board needed to complete the row.
Using the same floor throughout the room creates an elegant and consistent look. NOT: Forget the architectural integrity of the house. Make your home a mirror of your personal style.
The flap is the side you want to put against the wall when you start laying the laminate.
In most applications, floating floors and laminate floors (groove to groove) are installed.
The most common method of installing / installing hardwood floors is to line the slats parallel to the longest wall or go through the installation. With a few exceptions, such as B. loose beams, this is the preferred direction for laying parquet as it gives the best aesthetic result.
The standard for all floating floors is a 30 foot level before a joint is required. I have seen people pass without any problems, but 30 are considered safe. The more doors you go through, the more risky it becomes to cover long distances without interruption.
How to close a floor with a door
For the installation of the laminate floor and the correct size of the expansion space, it is recommended to use spacers, included in an installation kit, between the planks and the wall to allow for the expansion area. A 1/4 inch stretch is required.
Laminate countertops are attractive and affordable, and you can install the material yourself. If you are installing a new laminate panel on an old laminate material, you must first sand and clean the old surface thoroughly.
Always start with hardwood floors along the room’s most distinctive and distinctive wall. This way, when the room is empty, the corner part will be hidden under the furniture foot. To keep the floor straight and square, start laying the laminate away from the wall as the wall is not straight.
Above the room
If you want your room to be smaller and warmer, move the parquet from one wall to the other. When laying parquet in a long narrow corridor or room, it should face the door.
Right: Avoid twisting the parquet in different directions in different rooms to arouse interest. This makes a house seem unstable and costs more to install, especially in smaller, open-plan homes.