The LVL is intended for use in covered, dry conditions only. Do not install a wet or visibly damaged product.
The tabs are then glued together under pressure and heated with waterproof glue. LVL beams are exceptionally strong, strong and straight, making them ideal for most structural beam applications.
NelsonPine LVL should not be used in outdoor applications where it will not be protected from weather and moisture. The shelf life of untreated and untreated NelsonPine LVL, fully exposed to the elements and / or in contact with the ground, is less than 5 years.
Microllam® LVL should only be used in dry applications (internal areas) and should not be pressure treated. Some woods used in the production of Microllam® LVL may not be suitable for absorbing the chemicals used in processing. The best choice for outdoors is our treated Parallam® Plus PSL.
On-site LVL elements must be stored flat, above ground and dry prior to installation. While short-term weather conditions do not unnecessarily compromise performance, long-term exposure requires preservative treatment and refinement with a protective coating.
NelsonPine LVL blocks in standard thicknesses are supplied with an industrial finish to which normal wood and stain systems can be applied satisfactorily. The appearance and adhesion of the coating can be improved by sanding the surface relatively coarsely before the first coat.
LVL treated with H3 are intended for outdoor use and / or applications sensitive to atmospheric agents and offer the same resistance to termites as T2 wood and the same resistance to roots as any other wood treated with H3.
Yes, as long as the load and light requirements are met, treated laminated wood can be used for most outdoor applications. The most common uses are patios, large pergolas, awnings and covered verandas. The only real project they can’t be used on is marine applications like a dock.
Parallel Strand Lumber (PSL) is a type of wood-based material consisting of wooden strands glued in parallel. It is used for beams, headers, pillars and pillars, among other things. It is part of the family of structural composite wood (SCL) products.
LVL offers several advantages over typical milled lumber: manufactured to factory controlled specifications, it is stronger, straighter and more uniform. Due to its complex nature, normal wood is much less likely to bend, twist, bend or shrink.
The most popular LVL applications are top and bottom beams, hip and collar beams, scaffolding materials and precast beam flanges. The PSL is made with veneer cut into long parallel threads and glued to the finished component with glue.
Laminated wood veneer (LVL) was first developed in the early 1970s and is a highly technical wood product made by joining wood veneers (thin wooden planks of uniform thickness) and gluing them with a phenolic resin adhesive of type A which provides a waterproof seal. to tie.
Parallams pressure treated. You can nail 2 treated pieces together to form deck and porch beams, or you can use Wolmanized Parallams, parallel wood that has been treated to prevent rot and insect damage. Parallams can be painted or colored. iLevel, 888/4538358,
Due to shipping restrictions, the standard maximum length of beams produced is sixty feet.
Yes, untreated wood can be used outdoors. If necessary, active measures can be taken to make untreated wood a viable alternative to outdoor use. Measures such as sealing, varnishing or the use of other binders increase the life of the untreated wood.
Laminated wood veneer is a high quality engineered wood product made with veneer glued under heat and pressure. It is used for permanent structural applications including beams and trusses. Laminated Veneer Wood (LVL) is a high quality engineered wood product that is mainly used for structural applications.
If you live in a particularly rainy or humid climate, consider using a plywood sheathing instead of OSB. While plywood is generally more expensive than OSB, plywood is more resistant to moisture damage. Here are the four main ways to dry wood in a damp environment: Damp wood dries naturally if you have enough time.
If the rafters are stored horizontally, the block should be used in the center eight or four feet or as needed to minimize lateral flex and moisture build-up. When it comes to how long the beams can be exposed to the elements, a rough figure is around a month.