| 10 answers
- Boot the computer and press F2 to enter the BIOS.
- Disable Secure Boot in the boot option.
- Enable upload - old -ROM option.
- Leave the boot list option set to UEFI.
- Press F10 to save and exit.
- Turn off your computer and restart it with the USB device connected.
To start this player after many hours of trying, unfortunately only due to an error:
- Reset bios to default settings!
- Secureboot is activated.
- Disable Fast Startup.
- Save the settings with F10.
- Press and hold the F12 key while entering the boot menu and select the USB drive.
- it should start!
The steps are shown below:
- Boot mode must be selected as UEFI (not Legacy)
- Secure Boot is disabled.
- Go to the Boot tab in the BIOS and select Add Boot Option. (
- A new window will appear with an empty name for the boot option. (
- Call it a CD / DVD / CDRW drive
- Press the key to save the settings and restart.
- The system will reboot.
UEFI. Switch off
- Simultaneously click on the key combination Restart + Shift.
- Click Troubleshoot → Advanced Options → Startup Settings → Restart.
- Press the F10 key (BIOS setup) several times before calling the boot menu.
- Go to the boot manager and uncheck the Secure Boot option.
- Save changes and restart.
On some portable models it works like this: press the F10 key to enter the BIOS (or whatever the correct key is at boot time) immediately press the A key (too advanced) 1 answer
- Boot into the BIOS.
- Press Fn + Tab three times.
- Reboot into the BIOS.
Using the installation CD
UEFI is essentially a small operating system that runs on PC firmware and can do much more than a BIOS. It can be stored in motherboard flash memory or loaded from a hard drive or network share at boot time. Different PCs with UEFI have different interfaces and functions.
Boot from USB: Windows
Boot mode should be selected as UEFI (not Legacy) in the BIOS, go to General> Boot Order and click Apply. Note: If your system is not configured to boot via UEFI, you will need to change it when booting via the BIOS (F2) or via the OneTime Boot menu (F12). Go to the BootSequence tab in the BIOS and select Add BootOption.
Compatibility Support Module (CSM) is part of the UEFI firmware which provides legacy BIOS compatibility by mimicking a BIOS environment so that older operating systems and some add-on ROMs that do not support UEFI can still be used.
INSYDE H2O BIOS FAQ 2006. A: InsydeH2O is the Insyde software firmware series which is intended to replace the conventional PC BIOS. It is an implementation of the IntelsPlatform innovation framework for UEFI / EFI. The UEFI / EFI specification defines a new interface model between operating systems and platform firmware.
2, Press and hold the function key on your computer that allows you to enter the BIOS settings, F1, F2, F3, Esc or Delete (contact your PC manufacturer or read the user manual). Then click the On / Off button. Note: DO NOT release the function key until the BIOS screen appears.
How to disable UEFI Secure Boot on a Windows 10 computer
Legacy ROM refers to the format of the OPROM on the memory controller. There are two PC firmware standards, the old BIOS standard and the new EFI / UEFI standard.
Switch on the system. When the first logo screen appears, immediately press F2 to enter the BIOS. Use the right arrow key to select Security. Use the down arrow to highlight Enter Administrator Password and press Enter.
Secure Boot or Microsoft Safe Boot is a feature first introduced in Windows 8 and included in Windows 10.
Select the UEFI firmware settings.
A boot manager is a software tool with which the user can select the operating system to load from a list of operating systems installed on a hard drive.
- Enter the BIOS setup menu by holding down the F2 key while powering up.
- Go to Activate.
- Go to and set Off.
- Press F10 to save and exit.
- Press and hold the ESC key to launch the boot menu when the device restarts.