How to remove shower drain cover
How do you replace a shower drain cover? How to replace the gutter cover. To replace the old rusty drain cap. Apply the tape to the drain cover first to prevent the screws from falling into the drain. Sweep up any debris to prevent the hole from clogging. Remove the old custom shower drain cover and take it to the store to get the exact size.
How do you remove hair from shower drain?
Baking soda mixed with vinegar can help clean your shower drain. The combination of vinegar and baking soda opens the drain plugs in the shower. Clearing blockages in the shower drain may require an aid, such as a B. drain hose. Drain coils can be used to remove hair that is blocking the drain.
What is drainage cover?
Click here for the possible meanings and translations of the word fugue. A kind of cover in different colors and designs and for different types of gutters. They bought a drain cap to cover the outside drain so the leaves couldn't get in.
How do you fix a shower drain?
Fix a leaking shower drain?
Step 1 - Know where the leak is coming from
Step 2 - Create a valve to access the shower drain.
Step 3 - Remove the dripping part from the drain
Step 4 - Replace shower drain
Step 5 - Check the drain and replace the drywall. They will help you.
How do you install a shower drain?
Install the shower tray drain by inserting the top half of the drain into the drain hole with the threaded end through the bottom of the base. Attach the seals to the bottom of the drain and screw the bottom half of the drain onto the appliance. Squeeze the two halves to ensure drainage.
How do you change the shower knob?
If you have a damaged or leaking shower head, you can easily replace it by following these steps:
Step 1 : Close the water supply.
Step 2 : Inspect the handle, locate and loosen the screws holding the handle.
Step 3 : Pull the lever toward you, it should slide off the valve stem.
How do you replace a shower drain cover 2 5 inch pipe
Insert the tip of a screwdriver into one of the grilles and use it to open and lift the drain cover. After the drain cap has been removed, it is important that you take the time to clean the open drain before replacing the new cap. While you are at work, you can also check the shower trays for further repairs and cleaning.
What can I use to cover overflow plate in shower?
Sometimes helmets get stuck in invisible places and the plunger can cause them to move. Add 30 cm of water and cover the overflow plate with a damp cloth or tape.
How do you remove a pop up drain cover?
If there is no screw, just turn it counterclockwise to remove it. If you see a small screw, turn it with a spanner or allen wrench until it is loose enough to remove the plug (not completely). Pop-up drain covers. Some sliding drain covers go up and down.
How do you unscrew a drain stopper?
The valve caps should come up to open the drain and then horizontally (you can see the handle when you lift it). Open and close with a flick of your toe, this type of cap can sometimes be unscrewed in the open position and the cap can be removed.
What kind of screwdriver do I need to remove shower drain cover?
This is the easiest way to remove the siphon cap. You will need a Phillips screwdriver (or a flat head screwdriver) to loosen the screws holding it in place. This type of drain cover can have one screw in the center or two screws on the edges.
What's the best way to remove a shower cover?
Use an old toothbrush or cloth to clean the drain plug with cleaning powder. Place the drain plug under water and wipe it clean. Now you can set it aside until you put it back in the shower drain.
What's the easiest way to remove a drain cover?
The Popup and Flipit drain covers are the easiest to remove. They have small tabs that you can pull for easy removal. You can also add a drain hole to your shower cap. These drain covers can be removed by first pushing the cover open.
What should I do when my shower drain cover pops out?
Spray a generous amount of grease and apply steady pressure until the drain plug pops out. After removing the cover, remove any debris that may have accumulated in the drain hose. Always remember to remove any buildup of soap scum and scrape off any corrosion around the perimeter of the ladder.
How do you replace a shower drain cover oil rubbed bronze
To restore oiled brass ■■■■■■■■ 1. Clean oiled brass ■■■■■■■■■ such as faucets and gutters. 2. Use oil rubbed bronze paint. 3. Remove scratches with oiled bronze wax. 4. Use vinegar to remove minerals. deposits and traces of hard water Oil Frequently asked questions about restoration of polished bronze.
Is there a way to darken oil rubbed bronze?
To darken oiled brass hardware, you will need a metal room darkening device, such as a brass blackout solution. However, for this solution to work, you must first make sure that the base metal of your flashlights is brass, bronze, or solid copper. In addition, the fixtures may not have a transparent coating.
What's the best way to paint a bronze fixture?
Use a spray can. Use spray paint that simulates oil bronze. Use this method to quickly update your device. After sanding and before painting, apply a thin coat of spray primer to the accessory.
What's the best way to clean an oil rubbed fixture?
Start with water. Clean the oiled brass stand with clean water on a soft cloth. There is often enough water to clean this type of finish. Think carefully before using any cleaner other than water.
How do you replace a shower drain cover to catch hair
Remove the drain cap by lifting it or with a screwdriver. Use a flashlight to find a lock or bun. If the clog is helpful, simply pull it out of the drain with your hands and throw it away. To avoid clogging in hard-to-reach places, hang your hair with clips or the end of a hanger.
Can a shower cover stop hair from going down the drain?
Drain plugs are designed to prevent debris, including hair, from falling down the drain. However, they are not the best option for short hair. Many people think that short hair is not a problem. This is not entirely true, the hooves need more time, but at some point they will form.
What can I use to keep my shower drain clear?
One way to keep your shower drain clean is to use a hair trap. Hair traps are mesh screens that can be placed in a drain. As the name suggests, they trap hair and other debris that may end up down the drain. Unfortunately, not all drain covers are compatible with hair traps.
What's the best way to remove a drain cover?
Fold a small kitchen towel into a rectangle to close the rack, leaving the sides open for easy access to the screws. Use a Phillips screwdriver to remove each screw around the grill. Place the screws in a resealable bag or container so they don't get lost or fall into an open drain. Remove the cloth and lay it on its side.
What kind of drain do you need for a 2
This drain has an O-ring that seals to a typical 2”. ABS or PVC sewer pipe (adapters are available for 11/2'' and 2'' copper pipes). Four wings fold under the shower tray to provide drainage.
How long does it take to replace a shower drain from the top?
Four wings fold under the shower tray to provide drainage. The job takes about 30 minutes and requires no special plumbing tools. The hardest part is removing the old drain ■■■■■■. You will probably have to cut it with a hacksaw and tear it out of the shower tray piece by piece.
Why does my shower drain leak from the top?
An old drain can leak due to bad connections or cracked connections. Stains will appear on any finished ceiling below. A special drain accessory is installed in the upper part, which is attached to the shower tray.
How to prevent clogged hair in the shower drain?
5 SMART WAYS TO PREVENT HAIR CONTAMINATION IN THE SHOWER Comb your hair before showering or bathing. This removes loose hairs that would otherwise end up in the drain. If a few hairs (or a handful) have come loose during the wash, place them on the edge of the tub to throw them away later instead of leaving them. Here's the recycling idea! Place used fabric softener on a drain.
How do you remove hair from tub drain?
Fill the tub with hot water enough to close the drain. Place the plunger in a drain and submerge it completely for about 30 seconds. This process should safely and effectively remove all hair from the gutter.
What can remove hair from bathroom sink?
- Solutions for dissolving hair in the sink. Whiskers, scalp and dog hair collect in the sink and drain into the sewer.
- Mix the vinegar and baking powder. Yes, vinegar is great for both salads and home use.
- Baking soda and saline.
- Plumbing 101.
- Green business triggers.
How do you remove a shower drain cover?
Pull/Push (often confused with lift and turn) While holding the stopper, unscrew the top knob (counterclockwise) with pliers and a non-slip cloth or rubber to avoid scratching. Unscrew the brass insert at the bottom with the flat head, then remove the cover.
How do you remove hair dye from shower?
Pure white vinegar, in a 50/50 mixture of vinegar and warm water, will help remove the color from your hair. Pour this mixture over all the colored hair and saturate it completely. Put on a shower cap and leave it on for 15-20 minutes, then shampoo and rinse. Repeat if necessary, it will not damage your hair.
How do you clean out a shower drain?
Pour baking soda and white vinegar down the drain and scrub with the drain brush as an alternate method of cleaning the drain. Use baking soda and vinegar to clean your tub/shower, sink, and toilet.
What is the most effective way to remove unwanted hair?
- Papaya. Papaya is a great ingredient to completely remove unwanted hair.
- Sugar. Sugar is an excellent remedy for removing unwanted hair and has been used since ancient times.
- Egg white.
- One gram of flour.
- mint tea.
- Lime juice
- orange peel.
What is the best home hair removal?
Some of the most popular home waxing methods include waxing, epilation, depilatory creams, and electrolysis. When removing hair, all methods are effective, but only one can be considered permanent - electrolysis.
How to find the best hair removal option?
- Look for laser hair removal spas near you. The first step in finding the best laser hair removal specialist is to simply make a list of possible laser complexes in your area.
- Check online reviews.
- Call a professional laser hair removal.
- Request a free consultation.
- Schedule your first session.
How do you permanently get rid of body hair?
Electrolysis is another common method that can permanently remove body hair. This process uses a rod that is inserted into the hair follicles and then electrocuted. In general, electrolysis is the best way to remove hair from small areas.
What are the problems with laser hair removal?
Although laser hair removal is considered a safe procedure, there is always the risk of complications with any medical procedure. Some of these complications may include lightening or darkening of the skin. Scar. Changes in the structure of the skin. Ruined it. Incomplete hair removal. hair growth.
Who should not get laser hair removal?
You should not have laser hair removal in the summer, as skin is exposed to sunlight and is more prone to hypo- and hyperpigmentation, confirms Christian Caravolas, owner of Romeo and Juliet Laser Spa in New York.. After exposure to the laser, the skin can become sensitive and the sun can cause discoloration.
Where is the best place to get laser hair removal?
A: The best place for laser hair removal is a dermatologist or plastic surgeon. More important than the cost of the treatment is your safety and whether the treatment really works.
What is the best laser hair removal technology?
Ideal for large areas with Tria 4X laser hair removal. Tria laser hair removal devices use diode lasers. Silkn Infinity hair removal device. The Silkn Infinity epilator is small, portable and easy to hold and use. Mismon laser hair removal device. This laser hair removal device is an affordable and simple option. Braun Silk Expert Pro 5.
How much does laser hair removal equipment cost?
Distribution of the costs of laser hair removal. According to the American Society of Plastic Surgeons, the average cost of laser hair removal is $429. However, the cost varies based on several factors. The most important factor is the area of the body being treated.
How much does laser hair removal cost for full legs?
The cost will depend on your location and the skills of your laser hair removal specialist. The average number of sessions required for permanent hair removal is six. The total cost of laser hair removal on the legs (which are more expensive than other parts of the body) ranges from $30,000 to $78,000.
How much is armpit laser hair removal?
A: Laser hair removal under the armpits. It seems like a great candidate for underarm laser hair removal, but you'll need medical help to confirm it. Underarm waxing typically requires 57 treatments, depending on the type of hair and the strength of the treatment. On average you pay about € 100 per treatment in Southern California.
How do you remove hair from shower drain with baking soda
To remove hair from the shower with baking soda and vinegar: Pour 1 cup of baking soda down the drain. Slowly add 1 cup of vinegar as it reacts very quickly with the baking soda. Wait 15 to 30 minutes for the sparkling reaction to complete.
What can I use to dissolve hair in my shower drain?
Vinegar is the best home remedy for many things, mostly cleaning. So you can use it to loosen your hair in your shower drain. The first thing to do here is pour half a cup of baking soda into the clogged sink. Then add ½ cup of vinegar. Let him sit now.
How do you clean a clogged shower drain?
When the water is boiling, remove the pan from the heat and pour everything down the clogged drain. The hot water pushes a mixture of salt and baking soda down the drain, cleaning everything in its path. You can always rinse with cold water later to make sure everything is clean.
How do you get rid of hair clogs in the shower?
The snail is another simple solution for the most sensitive of helmets. Whether you have it at home or borrowed it from a friend, this tip can be more effective for clearing a clogged shower drain. Slide the hose down the drain until you reach a strand of hair. Turn the handle to take out the hose and the butcher.
Is it normal for hair to go down shower drain?
The best way to prevent massive clogging of hair in your shower drain is to be more aware of how much hair you are losing. Getting rid of juicy locks is natural and inevitable, but it doesn't mean it all comes crashing down.
How they can remove their body hair permanently?
- To be. Laser treatments are becoming increasingly popular as a permanent hair removal procedure for the body.
- electrolysis. Electrolysis can be used as an effective hair removal treatment in areas where waxing and shaving are not appropriate, such as the ■■■■■■■, ■■■■, sideburns and eyebrows.
- Waxing with sugar and wax.
- depilatory cream.
What is the best hair removal method?
This light energy is absorbed by the pigment of the hair follicle. The laser pulse lasts for a fraction of a second, long enough to destroy multiple follicles at once, leaving the surrounding skin intact. The laser is the best permanent hair removal method.
How do you stop unwanted hair growth?
Use a hair growth inhibitor. Apply the cream to the areas of your face where you want to reduce hair growth. The cream stays on the skin. Hair growth inhibitors can be used in combination with other hair removal methods, such as flossing, waxing and waxing. The result can take 4 to 6 months. The cost for a two month supply is about $100.
What do you need to know about drainage cover?
Plum insurance is generally a form of insurance that covers plums in the event of blockage or damage. The drain cover makes it possible to clean clogged drains where they have been physically damaged.
What kind of insurance do you need for drains?
Usually, water and sewer insurance is insurance that covers your sewer system in the event of blockages or damage. Typically, this insurance also covers toilets and sinks, as well as plumbing leaks and pipe blockages.
What's the difference between a drain and a plumbing pipe?
It's quite common for people to confuse the two, especially when looking for water and sewer insurance. A drain is a pipe that drains sewage (also called sewage) from a building. The waste water is then led from the sewer to the sewer.
What should I put on my catch basin drain?
If the drain cannot be closed completely, consider choosing a return filter cartridge. The oil and mud version not only traps dirt and debris, but also removes hydrocarbon contaminants. Passive skimmers are an excellent choice for sedimentation drainage systems.
What is drainage cover plate
Purpose The drain plate is used to collect the water that flows from the bottom of the pot. Without a base plate, the water can drain through the floor into the container, seep through the bottom drain holes and end up on the shelf, table, floor, patio or deck.
What kind of cover to use on drain grates?
lg. Block louvers and shutters to keep liquids out, or cover inactive drains to prevent odors from escaping. Wash and reuse these polyurethane coatings for a variety of uses - this durable material does not crack or degrade easily in water, oil or chemicals.
What do drain covers do to prevent spills?
SpillControl drain covers Block louvers and shutters to keep out liquids, or close inactive drains to prevent odors from escaping. Wash and reuse these polyurethane coatings for a variety of uses - this durable material does not crack or degrade easily in water, oil or chemicals.
What are the different types of drain covers?
Type C has a height-adjustable threaded drain grate. The D model is equipped with a hinged grille that can be opened for easy cleaning. ht. lg. wd. lg. wd. ht. Fat. These guards are located under the grill and have filter belts to catch oil, deposits and other contaminants.
Where do you use a trench drain cover?
Suitable for bright and spacious rooms in difficult conditions. It is widely used in wastewater treatment systems in city streets, squares, gardens, embankments, airports, parking lots, highways, railways, industrial plants and other types of industrial buildings. Appearance: simple lines.
How big is a cast iron drain cover?
1/4 thick cast iron sink covered model diameter, price and quantity 6 $ 6 1/4 $ 6 3/8 6 1/2 $ 38 $.
How much does a cast iron floor drain cost on Amazon?
Amazon's Choice for Sioux Chief Mfg Sioux Chief Cast Iron Floor Drain 846S9PK 61/2 Inch Cast Iron Strainer.
How big should a floor drain cover be?
Gutter Covers It can be difficult to find replacement gutter covers for your home or garage. At that time, each city had its own benchmark. Due to the lack of standardization, they have a wide range of sizes from 213/16 to 14.
Which is better cast iron or metal trench grates?
Metals Depot's exclusive drain grates and slots provide a more cost-effective and reliable solution for closing drain openings than conventional cast iron grates. Ideal for a variety of applications from garage wastewater, sedimentation pool wastewater, driveways, parking lots and roads.
What is drainage cover for driveway
Most streets are built with three types of gravel. The base layer generally consists of #3 gravel 10cm deep, the drainage intermediate layer is #57 stone and the aesthetic top layer can be gravel, marble chips, Jersey Shore gravel or Blackstar Rock.
What kind of drain system do I need for my driveway?
Inlet drainage systems. Standing water, rotted driveways and damaged foundations can be prevented by draining the trench. Gutters, also known as gutters, are ideal for draining water from your garage and foundation. Prevent flooding and other collateral damage by building a canal at the entrance of your driveway.
Why do you need a trench drain in your driveway?
Gutters, also known as gutters, are ideal for draining water from your garage and foundation. Prevent flooding and other collateral damage by building a moat in your driveway. Rainwater can be drained to a lower location or to existing drains.
How to drain water out of your driveway?
To install a driveway trench: 1 Determine where the water flows. 2 Using a circular saw or similar saw, cut a 23 cm wide trench in the concrete along the road. 3 Dig a trench 45 cm deep. Tilt the trench 1 to 3 inches every 10 feet in the direction you want it to flow.
Can a driveway be run into a storm drain?
In October 2008, a new law came into effect that prevents you from directing rainwater from a newly constructed access road to a stormwater drain. You should create natural drainage with one of the following three solutions:.
What is drainage cover for concrete
Concrete gutters are generally installed above drainage pipes in shopping centers. These drain collector caps are usually placed side by side to cover the side pipes with a protective plate and thus eliminate the risk of accidents.
Where do you put a concrete drain cover?
Concrete Gutter Covers Concrete Gutter Covers are often installed over gutter lines in shopping centers. These prefabricated drain covers are usually placed side by side to cover the side pipes with a protective plate, eliminating the risk of accidents.
What does a precast concrete drain cover do?
These prefabricated drain covers are usually placed side by side to cover the side pipes with a protective plate, eliminating the risk of accidents. BRHC manufactures precast concrete gutters in a variety of standard designs and sizes to meet the needs of different industries.
Why do you need a concrete drain manhole?
Concrete drainage wells Prefabricated drainage wells are an integral part of any wastewater management system. Drainage wells facilitate the cleaning, maintenance and collection of wastewater. J&R Prefab Prefab axles are built to withstand the toughest conditions in any city water or sewer system.
How many stock photos of drainage Concrete are there?
4,226 concrete drainage stock photos, vectors, and illustrations are available royalty-free.
What is drainage cover for yard
1 pending. A groove is essential for any type of gutter and any drainage ditch should extend beyond your yard. 2 receivers. Swamps are often used as termination points for water drainage. 3 underground slots. 4 Two common types of drains.
How to make a drainage system in your yard?
10 ways to clear your garden with your own hands 1 Replace the hard floor with drainage material. Eric Odras / Getty Images. 2 Install the rain cover. Add a drain. 4 Install the French drain. 5 Ventilate the lawn.
Can you use fabric to cover a drain line?
A garden cloth can be used to line the trench and cover the stone after installing the drainpipe, but this is not necessary. In both cases it is important that the trench is deep enough to maintain the correct slope and to be able to surround the drainage line with gravel.
What's the cheapest way to drain my yard?
Fortunately, there is an inexpensive way to get rid of surface water: the French sewage system. A French gutter is a trench filled with permeable material such as gravel in a perforated PVC pipe. The water flows through the gravel in the PVC pipe. PVC pipe drains water quickly.
What is drainage cover for garden
Close the drain. Cover the drain by adding a layer of decorative river pebbles, bordered by a wooden frame. Lay out a lawn or place a bed over the gutter. TIP. If you are going to put a bed over it, dig the drainage a little deeper to make room for the soil and use plants with a shallow root system.
How big of a trench do you need for a garden drain?
A groove is essential for any type of gutter and any drainage ditch should extend beyond your yard. A slope of 2% is needed to properly move water from one location to another. This means that if the length of the drain pipe is to be 30 feet, the height of the trench floor should be reduced 2 feet from one end to the other.
What is drainage cover for lawn
Trench drain grates, also known as sewer grates, cover an elongated horizontal trench drain rather than a single circular drain pipe. These gutters can hold more wastewater than traditional garden gutters and are used in paved areas such as patios, walkways and swimming pools where more efficient drainage is generally required.
What to do if you have a drainage problem in your lawn?
If the drainage problem is severe, it will help to bring the gravel to the top of the drainage trench and expose it. The grass will grow over time and drainage should work well. Exposed gravel can also be permanently exposed and kept as a quarry.
When to use a pool drain in your yard?
These gutters can hold more wastewater than traditional garden gutters and are used in paved areas such as patios, walkways and swimming pools where more efficient drainage is generally required.
What is drainage cover for basement
While some drains are covered with a grate that can be removed for future maintenance, others remain open when the basement is used only for storage. If a basement renovation is needed, the walls are usually flanked by a drain, which reduces the square footage slightly, but keeps the drain out of the living room.
What to do with floor drains in basement?
When floor drains are clogged, such as in basements and showers, a garden hose can be an effective way to clear the clog, especially if the plug is not close to the opening. Connect the hose to the faucet, insert the hose into the drain until it stops and hold the hose in the hole with a cloth.
What is the purpose of basement floor drains?
Anatomy of a drain. The floor drain is located at the lowest point in the basement and serves as a drain for water from a leaking water heater, condensation from the HVAC system, or even water leaks in heavy rain. If the drain is connected to a sewer, it is suitable for emptying a washing machine, a water softener or a laundry room in the basement.
How do you unclog a basement floor drain?
Step-by-step instructions to unclog the basement drain
Step 1 : Loosen the drain cap with a screwdriver.
Step 2 : Look through the drain hole.
Step 3 : Start by removing the dirt from the container with a shop vacuum.
Step 4 Look closely at the right side of the drain hole and you will find a cleaning plug.
What is a basement drain?
A basement drain diverts water from areas where it can damage walls, carpets, or other property. Groundwater flows into the sump by gravity and is sucked out of the house with the help of a sump.
How to remove shower drain cover without screws
There are generally two main methods of removing a shower drain: pulling the plug out with a manual extractor or plunger, or continuing to pull the plug into the drain to allow water to flow through again.
How to unclog a slow draining shower?
Method 4 of 5 Using physical objects to unclog the drain Try the drain rod first. Just like the zipit, the drain stick is a mini hose that can be used to clear clogs. Buy or rent a hose. A snake, also called coiled rope or channel rod, is used to find locks underneath. Install the cable. Remove the filter in the shower. Stick to your helmet. Make it clear. Remove the rod or cable.
How do you replace a shower floor drain?
While holding half of the tile in place, mark the width of the spacer from where it meets the drain. Score along this line with the scoring tool. Fold the tiles in a line to remove the excess. Sand the edge of the tile with a double-sided whetstone to remove any sharp edges.
What are the different types of shower stall drains?
There are two types of shower drains: point or center drain and linear, says Barbara Cratus, sales manager for Infinity Drain. The first, the more popular of the two, requires the shower tray to tilt 1/4 inch on all four sides.
What is drain cover?
manhole cover. A type of cover in different colors and designs and for different types of gutters. They bought a drain cover to cover the outside drain and prevent leaves from entering.
What is shower drainage?
The shower tray is a variant of the shower drain that collects and drains the waste water from the shower. The placement of the shower trays is under the floor. It can be made of plastic, fiberglass, rubber or metal. The container is emptied through a hose connected to the sewer or pipes through which the plants or food crops are watered.
What to use to cover shower drain grate?
A resealable bag or plastic container should have small screws and a drain cover to prevent anything from slipping into the open drain. You should have a folded cloth to cover the drain grille while removing or replacing the screws.
What's the easiest way to remove a shower drain cover?
This is a standard shower drain cover that resembles a flat filter or is concave (sometimes convex) enough to make tea. This is the easiest way to remove the siphon cap. You will need a Phillips screwdriver (or a flat head screwdriver) to loosen the screws holding it in place.
Do you need a screwdriver to remove a shower cover?
This is the easiest way to remove the siphon cap. You will need a Phillips screwdriver (or a flat head screwdriver) to loosen the screws holding it in place. This type of drain cover can have one screw in the center or two screws on the edges. The Flipit drain cap can be easily removed with no fasteners required.
How do you remove a snap on shower cover?
How to Remove the SnapOn Shower Drain Cover: A Step-by-Step Guide. First, apply a generous amount of grease along the edge of the shower drain cover. Let it run for about 2 minutes until the grease settles on the threads. Locate the hole in the drain cap and insert the tips of the pliers.
How do you remove drain plug?
Use pliers to turn the copper plug counterclockwise and remove it if you have a copper plug type drain plug. If your drain plug has this type of accessory, turn the large plastic screw counterclockwise with a screwdriver to remove it.
How do you remove a bathtub plug?
Remove the drain plug from the bathtub drain hole. The drain plug may have a lever mechanism or a hinged piece of metal that holds it in the drain. Use the drain plug to remove it. If the drain plug does not come out straight, you have a spring loaded drain plug. Unscrew the spider drain plug to remove it.
How to remove a drain cover from a shower?
1 First you need to spray a little grease along the edge of the drain cover. 2 Then insert a pair of pliers into the hole in the drain cap. Open the screwless drain cover with needle-nose pliers. 3 Hold the pliers with one hand, with both hands on the handle, and then turn them counterclockwise.