Disabling telephone line monitoring is very simple:
- Enter programming with * 8 installer code.
- Go to point 015.
- Disable option 7 by pressing 7.
- Press # twice to complete programming.
- Check if the phone line problem status is gone.
The default installer code for a DSC is 5555. The installer code is the code to enter DSC programming mode, which allows you to configure the system and make changes to the control panel programming. The setup code is the most important part of the system setup.
Log into the main control panel of your alarm system
- Find the main console of the home alarm system.
- Disconnect the alarm console’s AC power directly from the wall.
- Use the console access key (or another object, such as a small screw) to unlock and access the system bracket.
You can turn your home alarm system on or off by disconnecting the backup battery and then the device transformer. You can check if the control panel is off by checking the touch screen or keyboard and seeing if it is blank.
You can connect a POTS line to your security system by first connecting an incoming telephone line to an RJ jack. The RJ connector is then connected to the site telephones and the alarm system. Your security system must be compatible with mundane services to use this type of communication.
To deactivate an anti-theft alarm system: Find the panel. The burglar alarm control unit is housed in a small metal box or cabinet. Open the box. There is a cylindrical lock on the housing. Turn off the power. The power supply for the burglar alarm systems is a small plug transformer. Disconnect the replacement battery.
How to Disarm the ADT Single Door Alarm System Press the arm button and enter the security code to arm the system. Press the key on the keyboard to enter the bypass menu. Press 1 on the keypad to select the exclusion zone. Press one of the scroll buttons to scroll through the available areas. Make sure a B or Bypass appears next to the box on the screen.
A yellow triangle on the DSC ADT alarm system is also known as a fault indicator. It means your system has a problem that you need to solve when you see this icon. An error light can indicate 1 in 8 problems. To find out what the problem is, just press * 2 on the keyboard.
Power Failure - If the alarm / keypad beeps due to a power failure, do one of the following to silence the beep: If you have a control key, press Command 4. If you have has a Delete key, press Delete. If you do not have a control or clear button, you can enter the numeric code (make sure the system does not wake up)
How to reset a DSC alarm after shutdown Open the device access door. Press and hold the RESET button for 2 seconds. If the alarm does not reset after pressing the RESET button, press the * 72 buttons. Check the sensors if they still do not turn off.
To bypass a zone in your alarm system: Enter: your 4-digit code. Number 6 (Bypass button) Two-digit zone number for the zone you want to bypass. (01, 02, 03, etc.) Repeat this process for all the zones you want to bypass. If the system is disconnected, this process must be repeated to wake the system.
If the battery is low, the alarm will be completely empty as long as the power failure continues. Alarm batteries are not designed to cope with such frequent and long periods of dependence.
To clear the memory, unplug and deactivate the system. Some sensors (such as smoke detectors and glass break detectors) need to be reset after an alarm. To reset the detectors, press and hold the RESET button () for 2 seconds.
To reset a home alarm after a power failure Locate the system or system status button on the home alarm control panel. Wait for AC power to be restored to your home. Lift the circuit breaker cover and locate the breaker that controls the home alarm system. Replace the buffer battery on the home alarm keypad.
DSC Home Security System Troubleshooting Press the pound sign (#) to prevent the security system from beeping repeatedly. When the display shows a number 1 or Zone 1 is on, press the asterisk button (*) followed by the number 2. Follow the instructions on the control panel to replace the battery.