How to clean a pipe

How to clean a pipe

https://www.youtube.com/watch?v=s8If9ml6HqI

How do you clean a tobacco pipe? Cleaning the tobacco pipe Allow the pipe to cool completely. Pour the ash and tobacco residue out of the container. This can be done by tapping it or by using a special spoon. Remove the stem or mouthpiece. This may require a light tug or twist. Clean the rod. Run the pipe cleaner back and forth on the handle to clean it. Clean the rod.

Do I have to clean my pipe?

Whether you are new to the pipe or have been using it for a while, it is very important to keep it clean. A dirty tobacco pipe can not only affect the quality of the smoke, but also permanently damage it. That is why it is important that you learn how to clean your tobacco pipe and that you learn the different procedures to follow over time.

How do you clean out glass pipe?

Hot water can be very effective in cleaning a glass pipe. You can easily remove stubborn dirt or ash. You should perform a thorough cleaning by removing the remaining resin with a cotton swab. Now just rinse the hose with warm water.

How do you clean glass pipes?

Alcohol and sea salt to clean the glass pipe. Another proven way to clean a glass pipe is to soak it in rubbing alcohol for at least 24 hours. This method gradually liquefies the gums and makes the tube easier to clean.

How do you clean pipe cleaners?

Clean small stains by dipping the tip of the tool in clean alcohol to remove stubborn stains. To remove water or tar stains, soak the hose in a mixture of warm water and lemon juice for 10-15 minutes.

How do you clean a pipe stem?

Run the pipe cleaner back and forth on the handle to clean it. Clean the rod. Run the pipe cleaner back and forth through the hole where the rod meets and lower it into the bowl. Continue cleaning until all residue is removed.

How big are pipe cleaners?

Pipe cleaners are usually six to seven inches long. Crafts are usually 30 cm high and can reach 50 cm high. Available in 4mm, 6mm and 15mm diameters. Giant Pipe Cleaners are 30mm in diameter, 18in in length and have legs.

:brown_circle: How do you clean a smoking pipe stem cleaning

After smoking a pipe: first warning: do not remove the stem from the pipe while it is still hot. This will loosen the seat of the rod and may break the rod or break the end of the tube. The pipe should be thoroughly cleaned at the end of each smoking session.

:diamond_shape_with_a_dot_inside: What's the best way to clean a pipe?

To begin cleaning, gently remove the tube shaft from your head and place the two pieces on a paper towel. Dip a regular pipe cleaner in rubbing alcohol and wipe it along the stem of the container to the mouthpiece, then pull it out. Most likely it has black or brown dirt.

What's the best way to Polish a pipe stem?

Very lightly sand the 1000 grit or larger bar until it feels smooth. Do not sharpen the dowel (the bit that connects the stem to the stump) as this will only cause the stem to fall into the tube. Once the rod is smooth again, you can start polishing.

How do you clean a vulcanite pipe stem?

Drain the bleach and rinse the stem with cold water. It appears rough on the surface and has an anthracite gray tint. Everything is clean now. Both in and outside. Now you need to sand it. Very lightly sand the 1000 grit or larger bar until it feels smooth.

How do you clean a smoking pipe without alcohol

Alcohol acts as a cleaning agent and disinfectant, but salt acts as an abrasive and helps to clean the tubes. Shake the bag or container gently after adding alcohol and salt. You can soak, return and shake again and repeat. After shaking, let the tube soak in the solution for several hours.

:diamond_shape_with_a_dot_inside: Is it safe to use isopropyl alcohol to clean glass pipe?

While they consider it a safe household solvent that should be rinsed well, some people choose to avoid isopropyl alcohol altogether. Another cleaning method is to boil enough tap water to cover the pipe a few inches in a saucepan, reduce the heat, and soak the pipe in water for about half an hour.

Which is the best way to clean a glass pipe?

The most effective way to clean a glass pipe is to use boiling water. However, the fact that this method is the most efficient method of removing resin does not mean that it should be used for all glass tubes. The use of boiling water poses significant risks. First of all, there is the risk of serious burns, whether from hot water, pipes or a stove.

:brown_circle: What causes a glass smoking pipe to shatter?

Especially if you have an old plumbing, boiling water can overload and break the glass. If you take it out of boiling water in a very cold environment, the sudden temperature change can also cause the glass tube to explode.

:brown_circle: How do you use a tobacco pipe?

Screwing in the pipe Start with a clean, empty pipe. Squeeze the tobacco. Pack a bowl. Press the tube head down with a jack. Check the tobacco level. Bring the tube to your mouth. Add more tobacco in small strands until the bowl is too full. Draw the pipe again. Put a few more sprigs in the bowl.

:diamond_shape_with_a_dot_inside: What's the best way to clean a tobacco pipe?

While a cloth may be the greenest option, cleaning the pipes can be frustrating. If you prefer a cloth, prepare to remove stains. It also needs to be washed regularly, and if you do machine wash it, make sure it's separate from everything else. Meanwhile, paper towels are great for covering whatever surface you work on.

:brown_circle: Is it OK to use bleach on bathroom pipes?

This means that you also need to know what to use bleach for and not just use it without thinking about what it can do to your surface or your pipes. Most people use baking soda or vinegar in the bathroom when they are low on detergent. However, bleach also works if you want your bathroom to be perfectly clean.

:eight_spoked_asterisk: What's the best way to clean a water pipe?

Hold the neck of the hose under a faucet and turn on the warm water. Run the water through the hose and out of the bowl until the water runs clear. Due to the clean operation, you will no longer see resin residues coming out of the pipe through hot running water.

What's the best way to clean a briar pipe?

If there is a ring on your bar or bowl, now is the time to polish it to a good shine for silver or other metal, depending on the composition of your ring. Gently push the swab back into the head and wipe the tube well with a soft cloth, possibly soaked in a mixture, such as Savinelli Magic Cloth.

How can I clean the inside of plumbing pipes?

  • Shut off the water supply to the house.
  • Remove faucets from sinks, showers and bathtubs. These mixers can generally be unscrewed or secured with a screw.
  • Mix a solution of half hot water and half descaler.
  • Pour the mixture into pipes and drains and let it sit for an hour.

How do you clean home water pipe?

Soak very dirty pipes in a container. If your plumbing was initially very dirty, don't rinse it in the sink. Instead, fill a bowl with hot water and rinse each portion to rinse it off. Then let the dirty water run down the toilet and flush the toilet.

How do you clean out a sewer pipe?

Sometimes water alone is not enough to keep pipes clean, especially if they are old or connected to local sewage treatment plants. In this case, use bleach to clean and sanitize the pipes and remove blockages. At the end of the day, once a month, pour 12 ounces of bleach straight down the drain.

Which is better to clean pipes with water or ice?

The ice slurry, which fills 20-30% of the volume of the pipe, is cleaned by shear forces 1000 times the force of water alone. This provides a more efficient cleaning with significantly less water consumption than traditional rinsing methods. In fact, ice cleaning uses about 50% less water than a normal rinse.

Can you use an ice pig to clean pipes?

Instead, the ice scraper can overcome pipe bends, partially closed valves and integral butterfly valves without interfering with the cleaning process. The ice scraper is unaffected by pipe diameter changes and the remaining ice simply melts away.

What's the best way to clean an ice maker?

Pour in the ice, turn the machine back on with clean water and pour the ice back in. To clean the outside of the machine, simply use a damp cloth moistened with soapy water. How you clean the ice maker in your refrigerator depends on the type of refrigerator (top or side freezer) and the brand/model.

:diamond_shape_with_a_dot_inside: How is ice used to clean sewers?

An ice scraper solves all these problems. In ice scraper development, ice slurry is pumped into the line through an existing pressure ■■■■■■■ to push the ice scraper downstream and discharge dirty ice and debris into a free-fall chute or take over the work of the process.

Do i have to clean my pipe head

Run hot water through all faucets until clean and free of bubbles and foam. If you have hard water, you may need to repeat this process every few months, depending on how much hot water you use.

How to clean a pipe boil

Place a pan on the stove and bring water to a boil. Make sure you have enough water to cover the pipe. Submerge the pipe when the water is boiling. When the hose boils, the water evaporates. Make sure the water doesn't evaporate completely or your pipes will burst.

Why is it important to keep your water pipes clean?

Keeping your water pipes clean is an important part of general home care. Knowing how to keep plumbing pipes clean can save you a lot of money on your plumbing bills. Over time, the water pipes become clogged with dirt, scale or even roots growing in them.

:eight_spoked_asterisk: Do i have to clean my pipe for gas

The basic principle of cleaning a dirty pipe is to use an abrasive solvent cleaner. Plain or kosher salt or baking soda are excellent abrasives. Solvents can be alcohol, acetone, vinegar or pipe cleaners. Method #1: Clean the glass pipes with isopropyl alcohol and salt.

Do i have to clean my pipe for cold

Fill several pots with hot water, at least one for each drain you want to clean. Turn off the water in the house. Turn off the water heater. Drain the pipes by opening the faucets. Turn on the water and flush the toilet. Turn off the taps. Fill the pipes with the cleaner of your choice.

What should I do if my water pipes don't work?

If flushing the water pipes and descaling the pipes does not work, you may need to disassemble the water pipes to soak them in the cleaning solution. In the worst case, you have to replace them. If you have persistent problems with clogged pipes, consider installing a whole-home water softener.

What to do if your hot water pipe is clogged?

Place a dime or paper towel into the aerator one at a time to prevent water from dripping from the faucet, then replace the aerator and open the hot side of the unit. Now go to the hot spot in your home with the largest and most difficult water pipe to connect. This is device no.

:diamond_shape_with_a_dot_inside: Do i have to clean my pipe for concrete

Sometimes too much cement can build up in the sewer pipe to clean the pipe and get it working properly again. It is also possible that in these cases too much effort was required to remove the cement or concrete. In this case, there is no other option than to dig out the pipe and replace it with a new one.

:brown_circle: Can you remove concrete from inside a pipe?

There are many power tools available for breaking and removing concrete from a pipe. Common problems with this technique include applying a tool to concrete when the pipe has multiple bends before you can access it, and damage to old pipe when a power tool is used to break and remove the concrete.

:brown_circle: What's the best way to clean pipes and drains?

The first method they recommend for deep cleaning of pipes and gutters is a high-pressure drain jet. Your pipes are flushed with a powerful jet of water and even the deepest recesses in the sewer are cleaned.

Can you repair copper pipes in concrete slab?

Once the pipes are repaired, you will need to hire another company to repair the damaged concrete and/or masonry, which can be very expensive. Fortunately, when it comes to repairing copper pipes in hard-to-reach places, digging does not exist.

Can a plumber repair a pipe embedded in concrete?

Repaired pipes embedded in concrete and behind masonry can be expensive, as plumbers have to dig or drill to get to the pipes. Once the pipes are repaired, you will need to hire another company to repair the damaged concrete and/or masonry, which can be very expensive.

What's the best way to clean a baseboard heater?

How to clean the baseboard heater strips Turn the thermostat down. Remove the front cover from the slot. Inspect the underside of the fin to make sure air is properly circulating under the corrugated tube. Use a vacuum cleaner to clean your ribs. Use pipe cleaners, compressed air, or ice paddles to remove debris from between the ribs.

:diamond_shape_with_a_dot_inside: What should I do if my pot pipe cracks?

When the pipe boils, the water evaporates. Make sure the water doesn't evaporate completely or your pipes will burst. Soak the tube in boiling water for 20-30 minutes. Remove the pan from the oven and drain the water.

What do you need to know about gas piping?

This extension hose is generally at least 3 inches long and is designed to trap any water or debris that may be in the gas before any material enters the unit. It's just a gravity system in which solids and liquids fall into your pocket.

Do you need a shut off valve for gas piping?

While there are some exceptions, most devices should have a shut-off valve next to it. Most government agencies do not allow the use of gas pipes as grounding for electrical networks. However, many jurisdictions require gas lines to be grounded.

:diamond_shape_with_a_dot_inside: Is it possible to clean long pipe ■■■■■■■■■■■■■■■■■■■■ ■■■■■■■■ are usually in separate plastic bags so they aren't bad, but long lengths of hose alone are a real problem. They tried several things to clear them up, and it was surprisingly hard to get them to not be wrong until they figured out what really worked.

How often should you clean your glass pipe?

Clean the hose regularly. A quick rinse once a week and soak in isopropyl takes just 5 minutes. But it saves you the hassle of a deep cleaning or overnight soaking, and it also keeps your room sparkling and sparkling.

:brown_circle: How do I Clean my Glass Steamroller pipe?

Allow the roller to cool to room temperature before cleaning. Place the roller in your Ziploc bag. Pour in enough alcohol to completely submerge the roller in water. Add plenty of salt, just enough to clean the hose. Close the Ziploc bag and hold the roller with your hand. Shake the roller for 515 minutes.

How is clean your pipe?

Rinse off any dirt or ash with boiling water. Bring a small pot of water to a boil. Submerge the hose in water. Soak the hose in boiling water for 20-30 minutes. Use a tube of cleaner or cotton swab to remove excess residue.

How do you clean out glass pipe without

Here's how often to clean your glass tubes. How often should the glass be washed? For large consumers, the correct answer to this question is once every 1-2 days. Heavy users should use fresh water at least every day. The healthiest way for anyone to smoke a glass pipe is to clean it after each use and let it dry completely before storing.

What's a good cleaner to use on glass?

  • BEST OVERALL: Windex Window & Window Cleaner, Ammonia Free.
  • AD: Sprayway Aerosol Glass Cleaner
  • BEST FOR VEHICLES: Premium Invisible Glass Window Cleaner
  • BEST WIPES: Wet wipes for windows and surfaces.

:diamond_shape_with_a_dot_inside: How do you clean out glass pipe drain

Pour the water/vinegar mixture down the drain. Transfer the pot of water to the drain you wish to clean and pour it slowly and carefully down the drain. If you have plastic pipes, let the boiling water cool for 4-5 minutes before pouring it down the drain.

What can I put in my kitchen drain to keep it clean?

Cereals, cereals and bits of bread can also build up and clog kitchen drains. Usually anything that is soft and sticky should be washed off with water to make sure it doesn't freeze, stick, or harden on the downspouts.

Is it necessary to unclog outside drain pipes?

Often this is all that is needed to clean the external drainage system. Many locations have one or more viewing and/or drainage portals.

How do you clean out glass pipe cleaner

If you want to quickly clean dirty glass pipes, it's best to use rubbing alcohol and salt. They recommend the use of isopropyl alcohol, available in a pharmacy or supermarket, with an alcohol content of at least 70%, preferably 91%. The higher the alcohol content, the faster the cleaning process.

:eight_spoked_asterisk: How do you clean out glass pipe with baking soda

1: baking powder + vinegar 1 Heat the vinegar in the microwave for a few seconds. 2 Wait five minutes before pouring two liters of water down the drain. 3 Repeat this process if necessary.

What's the best way to clean a drain?

Baking soda is an inexpensive solution. Now that you know the benefits, there are two ways to use baking soda to clean your drain. Here they are: Pour a cup of baking soda down the drain, followed by a cup of vinegar. Place the vinegar in the microwave for a few seconds.

What can you use baking soda for at home?

Not only that, baking soda is also great as a natural deodorant, which is great if you're looking for a simple yet effective way to get rid of odors in your home. Here are some ways to use baking soda at home. Removes stains and odors from plastic food containers.

How do you clean out glass pipe covers

1 Remove the glass tube. Most glass tubes are one-piece bodies. 2 Rinse with hot water. Hot water is one of the best ways to start the cleaning process. 3 Place the glass tube in a plastic container. 4 Immerse the glass tube. 5 Shake the baby. 6 Water still warm.

How long do you let a glass pipe soak?

Once you've added enough alcohol to completely cover each piece, let it soak for 10-15 minutes, then go back and shake some more. This is especially useful when the resin builds up layer by layer after prolonged use.

:diamond_shape_with_a_dot_inside: How do you remove gunk from a pipe?

Remove any loose dirt from the pipe. Hold the tube upside down and tap it gently to remove any remaining particles. Then use a tube of cleaner, cotton swab, mechanical pencil, needle, or similar to remove large chunks of resin that are easily dissolved and accessible.

How do you clean out glass pipe valve

Reduce the boiling water. Make sure there is enough water to cover the entire pipe, preferably at least 10 cm. Slow boiling is when a steady but not extreme cascade of bubbles breaks the water's surface. Submerge the hose in water.

:diamond_shape_with_a_dot_inside: When do I need to open my clean out valve?

If your pipes are clogged, you will need to open the vent valve. You need to know how to locate a vent valve so that the plumber can check the pipes and make sure the sewer line is clean or clogged. That's why their mission was to teach Charlotte how to do simple plumbing jobs like finding a vent valve.

What does a clean out valve look like?

What is a vent valve? Your vent valve is a white cap that you can open to give you or the plumber access to the inside of the pipes leading from your home to the main sewer system. The valve is about 3 to 4 inches in diameter and made of plastic or metal. Most cleaning valves are made of white plastic.

:brown_circle: What cleaner should I use for glass?

Use a vinegar-based glass cleaner to keep the surface clean and streak-free. Do not use ammonia or alcohol based glass cleaners as they will leave streaks on the glass. You can also use a mild detergent and water to clean your windows. Petroleum-based cleaners can permanently damage glass.

What is the best glass cleaner?

Windex claims to be America's number one glass cleaner and is recommended by AOL. If you prefer to apply foam, consider using Windex foam glass and surface cleaners. If you prefer napkins, check out the Windex Flat Pack napkins, which are also produced by the company.

What is the best glass and mirror cleaner?

For most households, white wine vinegar is one of the easiest cleaning products available. It works well on most surfaces, including mirrors and glass, and does its job well. If the vinegar smell bothers you, rest assured that it will go away.

What not to use vinegar on?

It is also possible that vinegar can damage the rubber seals in appliances such as dishwashers and washing machines (although they will often be necessary to see the damage). In addition, under no circumstances should vinegar be used to clean the screens of tablets or smartphones.

:brown_circle: How do you get resin out of a glass pipe?

Make sure to use the best quality you can find as it contains less water and is more absorbent to the resin. Put the glass tube in the bag and pour some salt into the mouthpiece and tube. Then add a little salt to the rubbing alcohol in the bag. Close it and shake it off the ■■■■■■■■■■■■■■■■■■■■■■

:eight_spoked_asterisk: Can you use salt to clean glass pipe?

The reason salt is beneficial is that it takes much longer to dissolve in alcohol. Place the tube in a container and shake. Therefore, it must be made of plastic with a tight-■■■■■■■ lid. After a few minutes, remove it and use one of the recommended tools you have.

:eight_spoked_asterisk: What's the best way to clean a wood pipe?

Rinse off any dirt or ash with boiling water. Perform a quick and easy hose cleaning by removing loose resin and wiping or loosening large areas of debris with a cotton swab. Bring a small pot of water to a boil. Put on the fire and bring to a boil. Submerge the hose in water.

:eight_spoked_asterisk: What do you use to clean your glass?

  • spraying
  • Peel with a sponge
  • White wine vinegar
  • baking powder
  • window washer
  • Cloth or tower

How to clean the glass in your home?

Method 1 of 3: Cleaning the windows Place towels on the windowsills. Windowsills should not get wet with the cleaning solution, especially if they are made of wood. Mix vinegar and water to make a cleaning solution. Use four parts water and one part white vinegar. Dampen a cloth with a cleaning solution. Clean the glass. Clean the corners with a cotton swab. Brush the glass.

What is a good glass cleaner?

Ammonia mixed with vinegar is a good homemade window cleaner. A bottle of rubbing alcohol that can be mixed with vinegar to clean the glass.

:diamond_shape_with_a_dot_inside: How do you remove hard water stains from glass?

Drizzle the vinegar solution into the glass, let it sit for about 23 minutes, then wipe it off with a dry, lint-free cloth or paper towel.

How do you Keep Your Glasses clean?

Rinse with lukewarm water and pat dry with a clean microfiber cloth. Use a light touch. The microfibre fabric is lint-free, so your glasses should be perfectly clean. Use individually wrapped tissues to keep your lenses clean throughout the day.

:diamond_shape_with_a_dot_inside: What can I use to clean my glasses good?

  • Wash your hands before cleaning your glasses. Wash with soap and warm water without lotion for 20 seconds.
  • Rinse your glasses with lukewarm water. Dampen your glasses with tap water.
  • Apply them well with your fingers using dish soap.
  • Clean your nasal pillows with a cotton swab or soft toothbrush.
  • Rinse off the foam.

:eight_spoked_asterisk: How should I clean my glasses?

Moisten the lenses with a moist disposable glasses cloth. The glasses can also be cleaned on the go with wet wipes. ■■■■ lightly to remove dust and dirt, then wipe with a damp cloth in light circular motions.

What is the best cloth for cleaning glasses?

A good cloth for cleaning glass is a towel. Soft cotton scarf with small curly curls. The small batteries act like a sponge and absorb the cleaner relatively quickly.

What should I do when my glass pipe boils?

When the water is boiling, it's time to remove the pan from the heat. Leave the hose in the water for another 15 to 20 minutes, then rinse with warm water. If there is still something on the pipe, you can clean it with a pipe cleaner.

What is the best glass cleaning product?

Distilled vinegar, also known as white wine vinegar, is one of the most important cleaning products in any home and has the advantage of being all-natural. The most common and arguably the most effective vinegar cleaner is window cleaning, such as B.

:brown_circle: How to clean a pipe bowl

Place the container in a plastic bag and place it on the counter. Fill the bag with rubbing alcohol until the entire container is submerged. Add a tablespoon of sea salt, which acts as an abrasive, and let the tube sit for two hours.

How do you clean a bowl?

The easiest way to do this is to toss it straight into the trash. Simply turn the bowl over onto the bin and tap it gently with your hand or the edge of the bin until the ash falls out of your bowl. This is the best and easiest way to empty your bowl.

How to clean a pipe with alcohol

The rubbing alcohol breaks down the tar and cleans the stain. First, remove any remaining particles from the hose. Hold the hose upside down. Fill a plastic bag with rubbing alcohol. Use isopropyl alcohol to clean the tube faster. Put the receiver in your pocket. When the tube is placed in a bag, it should be soaked in alcohol.

:diamond_shape_with_a_dot_inside: Is it safe to clean a pipe with rubbing alcohol?

Is it safe to clean the pipe with alcohol? Yes sir. Rubbing alcohol, commonly known as rubbing alcohol, is by far the most commonly used cleaner for pipes and bongs.

Can I use rubbing alcohol to clean my pipes?

The basic principle of cleaning a dirty pipe is to use an abrasive solvent cleaner. Plain or kosher salt or baking soda are excellent abrasives. Solvents can be alcohol, acetone, vinegar or pipe cleaners.

:diamond_shape_with_a_dot_inside: How to clean a tobacco pipe

Cleaning the tobacco pipe Allow the pipe to cool completely. Pour the ash and tobacco residue out of the container. Remove the stem or mouthpiece. Clean the rod. Clean the rod. Clean the bowl carefully. Clean the edge. Coat the pipe with olive oil. Clean the hose regularly.

How should I smoke my pipe tobacco?

How do you smoke a pipe? Fill the head of the pipe. This step is the hardest to master, but it affects the rest of the smoke. Bring the tube to your mouth and pull it out. If the air cannot pass freely through the tobacco, it is too narrow. Use a wooden match or lighter to light the pipe. Relax when you smoke your pipe.

How do you clean metal smoking pipe?

Soak the lid, sink, and filter (if not replacing them) in rubbing alcohol (or your favorite cup cleaner) for at least an hour. Remove the hose from the vacuum cleaner and rinse it with hot water. When washing dishes, you may need to scrape the walls with a toothpick or paper clip. If there are any leftovers, start over.

How to clean a pipe of resin

Try dental cleaning tablets. Place a tube in the bottom of the Tupperware container and fill it with water hot enough to cover the top. Add 23 denture tablets and let them sit for half an hour. Baking soda removes a large amount of tar and the formula is designed to remove stains and residue.

:eight_spoked_asterisk: What's the best way to clean a Weed Bowl?

Clean the weed container with a cotton swab and scraper. Fill the ■■■■ with rubbing alcohol and add a tablespoon of coarse salt. Close all holes and shake well. Then wash off with lukewarm water. Clean the leg and bowl with a cloth moistened with alcohol. Clean the inside of the stem with cannabis tube cleaner.

How to clean a pipe with salt

1. Shake the tube gently and put it in your mouth. 2. Inhale normally without applying force to the grip. 3. Exhale through your nose. 1. Gently shake the tube and bring it to the nostril. 2. Inhale and switch sides. 3. Repeat until desired treatment time is reached.

How do you clean a pipe with alcohol and salt?

Close the bag or container and shake the mixture to turn. Close the zipper on the bag or lid of the container to seal the tube and the alcohol-salt mixture inside. Shake the bag or container vigorously for 12 minutes to rub the salt over the surface of the pipe.

Can you use isopropyl alcohol to clean a water pipe?

If your pipe is too big to fit in a plastic bag or container, such as a large ■■■■, you can fill it with rubbing alcohol and salt. Hold your hands over each hole as you stir the mixture, then place the tube on a flat surface and let it soak. The rest of the process is the same as with a small tube. Thank you!

how to clean a pipe