The average price of high quality asphalt ranges from 85 to 150 per ton. Asphalt prices fluctuate with oil prices.
For wholesale prices, the asphalt price is expressed in tonnes. One ton of asphalt covers approximately 80 sq m with 2 “of material or 160 sq m with 1” of material. The current wholesale price for basic asphalt is 70, 80 per ton, player class is 75, 85 per ton.
Driveway flooring costs an average of 4,557, with a typical range of 2,856 to 6,310. This project costs 7 to 13 per square foot, including 2 to 6 per square foot for materials and 5 to 7 per square foot per job. If you need compensation, pay 8 to $ 15 per square foot.
Hot asphalt costs $ 24 per square foot over a 25-year lifespan and costs the community 96 cents a year.
NAPA estimates an average asphalt density of 145 pounds per cubic foot or 3,915 pounds per cubic meter. For example, if the calculated volume is 25 cubic feet, multiplying 25 by 3915 yields an asphalt weight per cubic meter of 97,875 pounds, or approximately 49 tons.
A 90-foot-long, three-wide concrete driveway would cost about 1,800 for materials plus an additional 2,000 for labor, for a total cost of nearly 4,000. For a 500-square-foot (50 x 10) driveway, that equates to an average cost of 2,500.
In comparison, the average cost of a concrete driveway is nearly 7,400. Other sources estimate that the cost of building a paved driveway is between 2,300 and 10,300. Homeowners usually pay per square meter. Reibling adds that the average cost per square foot is between 3.50 and $ 4.50.
A gravel driveway is by far the cheapest and fastest to install, especially if the existing driveway is good.
Liquid asphalt is a byproduct of crude oil refining, he said. Unsurprisingly, a petroleum-based material became more expensive in a year when the price of a barrel of oil dropped from 63 in January to 70 and then dropped below $ 50 since December.
Do it yourself paved driveway. Building your own asphalt driveway is hard work and not just one person’s job. Having friends willing to help you can save you a lot of money by building your own driveway even when you consider the cost of renting the equipment.
The granular base unit used for a residential driveway is typically 6 to 8 inches. In addition to this layer, residential streets typically use 2-3 inches of asphalt while commercial driveways use around 3 inches.
Cheap Ways to Asphalt a Driveway
Asphalt work costs an average of 30 / m2. However, prices vary from job to job. You can expect the cost of asphalt per square meter to vary between about 25 / square meter and $ 40 / square meter. Many factors determine where you will pay the lower or higher cost of asphalt per square foot.
Costs. Unless all maintenance costs are taken into account, asphalt is generally much cheaper to lay than concrete. On average, the cost per square meter of asphalt will be between 2.50 and 4.00. It is not uncommon to have a well-maintained concrete driveway with a smooth surface that costs over $ 15.00 per square foot.
Bitumen is a liquid binder that holds asphalt together. A bitumen-sealed surface is a layer of bitumen that is sprayed and then covered with an aggregate. Asphalt is produced in a plant that heats aggregates, bitumen and sand, dries them and mixes them into a composite. It is good to understand the difference between the two.
How to calculate the amount of asphalt
Concrete Driveway Cost
Concrete lasts longer, but the paved driveway is cheaper to install. Asphalt requires more maintenance but is generally easier to repair. In winter, concrete walkways can be damaged by using the wrong de-icing agent. Concrete and asphalt driveways need a solid foundation prepared by experts.