| Just follow the simple troubleshooting steps below. Step 1: Reset the router by pressing the reset button on the back of the DLink router for 15 seconds. Step 2: All the router’s LEDs will start blinking and the router will reset. You can now surf the internet via WiFi.
To restart the modem:
- Unplug the power cord from the back of the modem. Make sure you’ve unplugged the correct cable and make sure all the modem’s LEDs are off.
- Reconnect the power cord to the modem.
- Wait for the Internet LED to turn green.
- Try connecting to the internet.
If you want to change this default from here:
- Check if you are connected to Sky Broadband.
- Enter 192.168.0.1 in the address bar of your browser.
- Enter your username and password.
- Select Maintenance and then Enter password.
- Enter your current password with the old password.
- Enter a new password in New password and Repeat new password.
How to restart a router and a modem
- Disconnect the router and modem.
- Wait at least 30 seconds.
- Connect to the modem.
- Wait at least 60 seconds.
- Log in to the router.
- Wait at least 2 minutes.
- When the router and modem restart, try to see if the problem goes away.
Reset the router to factory settings
- Turn on the router if you haven’t already.
- Find the reset button for the hole.
- Gently push a small stick, open paper clip, or other suitable object into the hole until you hear a click.
- The lights on the front of the router should turn off and on again, starting with the power indicator.
WLAN connected, but no Internet: start with the router
Windows can then determine if the modem is installed correctly and can connect to a network.
Refer to the manual to find the router’s default username and password. Often, if you’ve lost your manual, you can find it by Googleing your router’s model number and manual. Or just search for the default router model and password.
Resetting a home router will return it to the state it was in when you purchased it and may help you troubleshoot some network problems. The web interface of most routers keeps the reset function in the same area where you can save / restore settings.
Restarting the modem can fix Internet connection problems, improve slow-motion connections, and fix Wi-Fi problems that can also affect the delivery of digital TV services over an Internet connection. By unplugging the power cord from the back of the modem, you give it the breath it needs.
You can turn off a router when no one needs to use the Wi-Fi network. This is only an inconvenience for users who want instant internet access as they will have to wait a few minutes for the router to reconnect to the modem and start broadcasting the Wi-Fi signal
Step 1: Open the browser from a computer connected to the router (wired or wireless) and enter the IP address of the router in the address bar. The standard IP address is 192.168.0.1. When you log in, enter your username (admin) and password (the default password is nothing).
Click Start> Run, type cmd and press Enter. Type config / release in the command prompt, hit Enter, this will release the current IP configuration. In the command prompt window, type ipconfig / refresh, hit enter, wait a moment, the DHCP server will assign a new IP address to your computer.
NOTE: When you reset the factory settings, the router password is also reset. The default router password is admin for the username, leave this blank. IMPORTANT: Make sure the router’s power light blinks when you press the reset button.
How to reset network settings on Android and iOS
Start a web browser and enter the address line. How do I change my password 192.168 8.
The pre-shared key has been changed.
If you are unable to access the router’s “online configuration” or if you have forgotten your router passwords, you can reset the router to factory settings. To do this, press and hold the reset button for 10 seconds. NOTE: Resetting the router to factory settings will also reset the router passwords.