Ground level deck ideas
How to build a ground level deck?
- Planning and Design Think about where you want to place your equipment, imagine how you will use it and assess the terrain.
- What equipment will you be using? The level must be low, so you have to take into account the type of wood or composite.
- Consider deck ventilation at ground level. The floor under the deck gets wet.
- Planning and coordination of the foundation. You can make a simple base by placing concrete blocks in the corners of your patio.
- Placing the girders Place the bridge beams on the concrete blocks and make sure that they are high enough for ventilation, as mentioned above.
- Anchor / Beam Placement Once the beams are aligned, place the supports on the corners of the deck at the intersection of the beams and beams.
- Fastening internal beams The beams are fixed at regular intervals at the end of the beam with beam supports. Be sure to use the spacing recommended by the decking manufacturer.
- Laying floors. Finally your floor takes shape and it becomes the structure you envisioned.
- Trim the edges. Once your patio is in place, use a circular saw to cut off any excess and keep your patio clean and level.
- Add stairs or stairs. If you want ground floor stairs for your patio, you need to decide how many and how you will build them.
- Enjoy your terrace
What is a low deck?
Low bridges are bridges whose top level is less than 24 inches high. This large deck plan is for a huge 504 square foot deck on two levels! On the upper deck there is enough space for a large table. The lower deck is even larger and has built-in benches and planters.
What is a deck Foundation?
Patio foundation In a patio, just like a house, the foundation provides integrity to the structure. Provides protection against wind, drift and buoyancy. The foundation must be designed so that the weight of the platform and everything on it is distributed on the ground.
What is a design deck?
Design Deck is a fun and easy way to learn the basics of graphic design, improve your design skills, and better understand the designs you interact with on a daily basis. The design platform contains important information about the practice of graphic design.
Can you build deck without footings?
On gravel. Leveling the surface of a flat deck is also required for alternative construction methods. Add an even layer of gravel for drainage and you can build a deck that will sink to the surface without a foundation.
How to build a Floating Deck?
- Make a map of the deck. Before building, decide what you want your deck to look like.
- Clean the bridge area. Use a shovel or rake to remove grass, rocks, leaves or other plants.
- Organize the bridge blocks.
- Build the skeleton of the bridge.
- Customize your frame.
- Position and secure the platform.
- Color your terrace.
How do they build decks?
How to build a terrace: planning and design of a new terrace. Check with your local building management and homeowners association for building permits and requirements. Coating materials. Pressure-treated wood (top right) is the standard weather protection material. Construction of the bridge. Layout of the roof layout. Works with impregnated wood. Next steps.
How deep do deck footings need to be in Minnesota?
The Minnesota Building Code requires a minimum depth of 42 inches in the southern part of the state and a minimum depth of 60 inches in the northern part of the state. The dividing line is shown in the diagram below. While the base should be deep enough to prevent freezing, the depth of the base is only part of the equation.
How to build a small deck?
- Preparation. The shed is 10 x 14 feet, so I decided to span the entire facade, which is 10 x 6 feet.
- frames. Then I had to indicate exactly where the bridge would go.
- The main table of the book.
- Add patio tables.
- Conclusion Watch the video.
How to frame a ground level deck
How do you build a terrace on a flat staircase? Attach the joists to the post anchors, then attach the faucets and brackets. Attach the interior joists to the ends of the joists and add joists to the joists. Trim excess wood from all sides. If you opt for untreated wood, it must be treated, sealed and varnished.
Is a deck part of the building?
Bridge (building) In architecture, a bridge is a flat surface that can bear weight, similar to a floor, but usually built from the outside, often lifted off the ground, and usually connected to a building. This term is a generalization of bridges on boats.
How to build a ground level deck without digging holes
However, deck can be a tedious task when you need to dig holes and pour concrete to anchor deck posts. Fortunately, there is an easy and inexpensive way to build a patio without digging holes.
What is the hardest part of building a deck?
Deck blocks and pile anchors, in combination with base plates, can form a solid base for a deck substructure. I've built a lot of platforms and the hardest part is always digging holes. Digging the ground is dirty work.
Is it better to build a deck on top of the ground?
One of the advantages of sitting on the ground is that the deck blocks are not affected by frost. Bridge blocks come in two different shapes. One type has a notch at the top for a four-by-four post and the other has a cross-shaped notch to hold the rafters directly without intermediate posts.
How high can you build a deck with deck blocks?
The option designed to support the SUV allows you to build taller, but I would recommend building a bridge with bridge blocks no more than six feet high from the ground to the bridge's surface. How to use cover blocks: Cover blocks replace messages or provide a basis for a message.
Ground level deck
Land bridges (also called floating bridges or platform bridges) are land bridges. In general, platforms are easier to build if they are less than 30 inches off the ground for three reasons. No stairs or handrails required (less risk of injury).
How much does a ground level deck cost?
A lighter construction can also mean a lower cost than a raised deck. Depending on the size and materials used, a single-level patio can cost up to $4,000. Some of the most expensive patio components are railings and ladders.
How to build a simple deck?
- Confirm the ledger. Remove siding and siding from buildings 1 foot above the top of the transom.
- Protect the ledger. Cut a strip of self-adhesive waterproofing membrane 15 cm wide and the same length as the stringer.
- Install the foundation and pillars.
- Install the post feet and side rails.
- Install the leading edge joists, joists and inner joists.
How to build a multi level deck?
- Use the Construction Tool > Railing and Deck > Right Deck Railing and click to drag the deck railing to create multiple decks, as shown in the image below.
- With your decks in place, use the Select Objects tool to click into the opening that is part of deck 2.
- Use the Open Element Editing button to open the Roof Space Specification dialog box.
Can you put a deck low to the ground?
Low bridges are sometimes an option and sometimes a necessity. If the floor of your house is close to the ground, you need a low deck to avoid obstacles, or if you just want to create a freestanding, flat, dry deck away from your house, the methods on these two sides should provide a solution.
What is a low deck fence
There are three main problems with low-grade covers that can lead to a shorter life. Ventilation - Good air circulation is required under the decking to prevent moisture build-up and damage to the decking frame and accessories.
What type of wood is used for a ground level deck?
The floor should be low, which means you need to think about what type of wood or composite you will use for the construction. If the bottom of your deck is less than 2 feet above the ground or is partially ■■■■■■, consider using pressure-treated lumber designed to make contact with the ground.
What is a ground level deck and how does it work?
The terraces on the ground floor highlight the outdoor areas and give you good space to place chairs, potted plants and even a grill for fun. This gives you the space to enjoy your property and enjoy the outdoors. However, there are a few things you should know before you start building your own patio.
What is a low deck roof
Roofs of 1 to 1 degree are considered slightly sloping. Various types of roof profiles have been designed for such low installation levels, including single-layer cladding (Trim Deck) and concealed fixings (Klip Lock, Speed Deck and Top Deck). There are other options as well, but if budget is your priority, the above profiles offer the best value for money.
What is a roof deck?
Basically, the deck is a roofing material that sits between the load-bearing elements of the roof (beams and rafters), insulation and waterproofing layers (cladding, roofing materials, layers, etc.). The roof is the part of the roof that everything else is placed on.
Can you use softwood decking on a roof?
A softwood deck is not the best idea for a roof terrace. In these harsh environments, pressure treated decks are very prone to cracking, breaking, warping and twisting. Even the best quality softwood floors, such as cedar, require a lot of rework at this height and exposure. If it is not repaired regularly, you can expect many failures and recalls.
What is the best joist for a roof deck?
Because the roof terrace in the foreground is a rough environment, the wooden beams can warp, warp or rot. Aluminum beam. A high-performance adjustable aluminum beam pedestal system costs more up front. However, they do not rot, warp, curl and are not combustible.
How to build a 12X16 deck?
- Dimensions and starting point. To measure the deck and determine the foundation, you will need drill boards and a stone cord.
- Foundation concrete. As part of the initial foundation when building your patio, you will need to purchase concrete to anchor the foundation into the holes.
- Deck floor.
- Ramps and stairs.
What is a low profile step deck?
The flat footboards also help the truck navigate slippery winter roads with crosswinds. A low profile flatbed truck has an elongated body and a cab that is less than half the height of the trailer, with a roof that extends above the cab but is attached to the truck at the rear.
What is the best decking for a swimming pool?
Pool cover material 1 concrete. Cast concrete is the most popular pool liner material and generally the cheapest. 2 trees. Wood is another popular decking material. 3 composite woods. Do you like the look of wood but don't want to worry about maintenance?. 4 Peter. 5 cobblestones. Bridge with 6 tiles.
Does decking need to be sloped away from pool?
(On a wooden deck, the water flows between the planks, so a ramp is not necessary.) The ramp must be within a quarter inch per linear foot of the pool to prevent dirty water, leaves, and debris from flowing back into the pool. Add a string if needed.
What are the different types of concrete pool decks?
The concrete pool covers can be planed or stamped. A broom finish gives the concrete a normal look. Several color options are also available. Perforated concrete can resemble stone, tile, or brick. While stamping finishes are usually a little more expensive than broom finishes, stamping is also much cheaper than stone.
What is a low deck house
Actual definitions vary by material and construction, but any bridge whose lowest point (the bottom of the column) is less than 400mm from the ground is considered a low bridge. Why is proximity to the ground a problem? There are three main problems with low-grade covers that can lead to a shorter life.
What is a deck house?
The Deck House is a beautiful period architectural style that is available exclusively through the Acorn Deck House. The characteristic terrace roof and the visible beams and pillars provide large glass walls that naturally welcome the appearance.
Can you put a deck under the floor of a house?
If the floor of your house is close to the ground, you need a low platform to avoid obstacles, or if you just want to create a dry, flat, freestanding space away from your house, the methods on these two sides should help. have to offer. The ground floor cutting deck can also serve as the bottom of the stepped deck.
What to consider before building a deck?
Before building a patio, you need to think about the best materials. The aesthetic appearance of the materials is not everything, it is important to take into account their care, availability and durability. The three most common decking materials are:
What materials do I need to build a low-level deck?
For a low deck you need as few materials as possible to reduce the height. The sacrifice for this is that you need more foundation to support. Wood: all wood used must have at least H3. This means that it has been treated against moisture, rot and insect infestation.
What is the best size decking for a 75mm X 75mm floor?
A 1200mm span can be used with 75mm x 75mm F7 hardwood. For a low deck, you want the smallest materials possible to reduce headroom. The victim of this is that you need more foundation to sustain. Wood: all wood used must have at least H3. So it's about moisture, rot and insect damage.
How deep does a deck need to be for a slab?
The most common scenario is that a terrace is desirable right in front of the front door of a ground floor panel house. Usually this will give you a depth of about 200mm to work with.
What is a low deck in construction
What is a low level deck? Actual definitions vary by material and construction, but any bridge whose lowest point (the bottom of the column) is less than 400mm from the ground is considered a low bridge. Why is proximity to the ground a problem?
What is a low deck bridge
This article introduces the five main types of cheap bridges. Types: 1. Wooden bridge 2. Bailey bridge 3. Callender Hamilton bridge (block) 4. Damm 5. Diving bridges.
What is the best substitute for wooden decking on a bridge?
The wooden platforms described above can be replaced with steel or reinforced concrete gutters, as long as the new roof does not weigh more than one tonne per meter of light. Callender Hamilton Bridges can be constructed in one of the following ways, depending on site conditions and the availability of qualified personnel and equipment:
What is the structure construction bridge deck construction manual?
Preface The Bridge Deck Building Guide is intended to be used as a guide and reference for bridge engineers and others involved in the field design and construction of bridge decks. As this guide is intended as a guide only, contractual documents should always take precedence in the event of a conflict.
What is the purpose of deck bridging and blocking?
The lock provides support and strengthens the connection between the ladder and the bridge. The deck provides support for the picture frames and other deck structures, such as diamonds, beams, or parquet floors, which allow moisture to ■■■■■■■■■. Interlocking facilitates the construction of irregular, semicircular or circular bridges.
How many footings do I need for a deck?
The standard rule of thumb for foundations is that the larger the beam and foundation, the less foundation you will need for the base deck. If you are building a simple deck, the foundation and piers should be no more than 2.5 meters apart.
How many footings do you need for your deck?
The standard rule of thumb for foundations is that the larger the beam and foundation, the less foundation you will need for the base deck. If you are building a simple deck, the foundation and piers should be no more than 2.5 meters apart. However, if your patio has a hot tub or roof deck, it should be able to support that weight with an extra pedestal.
What size footings are required for decks?
The answer depends on the size and shape of your deck, the size of your base, and the size of your rafters. The larger the beam and ■■■■■■, the fewer flanges are needed. In most cases the foundation and piles should be placed lower than 8. Typically, installing a hot tub or deck above the deck requires more foundation and posts to support the extra loads.
What is a deck foundation design
The foundation must be designed so that the weight of the deck and everything else on the deck is distributed over the ground. While most house foundations contain a stone wall around the entire perimeter of the structure, a deck foundation generally consists of a series of piers and individual concrete foundations.
What is a deck foundation made
These substrates should be tested to ensure they can hold your deck and are frost resistant. Since the base is placed underground, it must be made of materials that will not decompose. The foundations are generally made of concrete.
What is a deck foundation look
Types of bridge floors. 1 poured concrete foundation. The concrete base is excavated and poured directly into the ground. This type of footer requires a lot of work because you ■■■■■■ it 2 feet. 3 stackable prefab concrete foundations. 4 bridge blocks. 5 screw/spiral stacks.
What is the cheapest way to build a deck Foundation?
Bridge blocks. The cheapest bridge foundations are concrete bridge blocks that simply rest on the ground. The blocks generally cost less than $10 each. However, you will need to buy a lot of them so that the weight of your patio is distributed over enough floor space so they don't drown.
Are ground anchored spikes a good option for a deck Foundation?
When connecting a terrace or building to your home, this decision is an important consideration. Posts anchored in the ground are used for fence posts. However, some use custom loading plates and are a good choice for a bridge foundation.
Why is it important to look under your deck?
For this reason it is important to look under the decking to ensure all accessories, joints and joists are in good condition. This means, among other things, that nails, bolts, screws and other metal fasteners are not corroded or otherwise damaged.
What is a deck foundation construction
Installing a deck floor A solid deck floor is essential for a one- or two-story patio. Four types of roof foundations should be considered: concrete columns with foundation, concrete columns without foundation, concrete capping blocks and screw piles.
What is a deck foundation cost
The cheapest bridge foundations are concrete bridge blocks that simply rest on the ground. The blocks generally cost less than $10 each. However, you will need to buy a lot of them so that the weight of your patio is distributed over enough floor space so they don't drown.
How much does it cost to have a foundation installed?
Training costs range from $4 to $25 per square foot. The price depends on your location, the size of your home and the type of foundation. The cost of the project can vary depending on the type of foundation you are installing. The most common options are a full basement, slab, pillar and beam, and rest area.
How much does it cost to build a deck on average?
Adding a patio can also add significant value to your home. The average patio cost is between $20 and $50 per square foot, and most will spend between $4,000 and $12,000 to build one. There are several things to consider when budgeting a project to get a more accurate estimate.
What is the average cost of a pier and beam foundation?
Concrete slabs are used as foundations for houses that are 6" thick on average, but are also poured for mobile homes, garages, workshops, driveways and patios that are 10-20" thick. Pillar and beam foundations cost $7 to $11 per square foot, or $7,200 to $13,500 on average.
What is a deck foundation used
In the case of a terrace, such as in a house, the foundation gives integrity to the structure. Provides protection against wind, drift and buoyancy. A 6 x 6 strut supported deck is shown in Fig. 1. Learn about working with pressure treated wood.
How much does it cost to remove and replace a deck?
On average, removing a patio costs between $5 and $10 per square foot, depending on the size and condition of the patio. If you have a multi-level integrated seat or backrest, sliding prices go up. On average, it costs between $720 and $1,440 to remove a 144-square-foot 12 x 12 deck. The cost of replacing decking boards.
Should I replace my existing deck with Trex decking?
If your existing decking looks a bit worn and the decking foundation and framing system are intact, you can easily replace the deck stairs and railing with a Trex decking with railings. This is the ideal way to save time and money by taking full advantage of Trexs' advantages over wood. Renovate your terrace in a few days. Enjoy this for decades.
What is the best deck footing for a deck?
The thorns are stuck to the ground. However, some use custom loading plates and are a good choice for a bridge foundation. They are less expensive than screw props and provide greater lateral strength than earth bridge foundations. The installation method is brute force with a hammer or the use of a pneumatic hammer.
How to decorate a deck?
- Lay out a chic rug. A stylish outdoor carpet can turn a terrace into a cozy extension of your home.
- Use the light to create atmosphere. Soft lighting can be a strategic addition to your patio design.
- Create a cafeteria.
- Pay tribute to the beach.
- Summer camp challenge.
- Decorate with floral inserts.
How to build a raised deck?
- Basic Steps for Making a Raised Platform (TLDR Version) Dig holes for the pillars, being careful not to cross the frost line.
- The smallest details.
- Build a solid foundation.
- Installation of racks and beams.
- Installation of beams and corrugated board.
- Pick up the railing.
What color is a deck?
The four-color deck is identical to the standard French deck, except for the color combinations. In a typical English four suit game, hearts are red and spades are black, crosses are green and diamonds are blue.
What is a deck designer?
MiTek bridge designer. MiTek Deck Designer is free interactive online software that allows you and your customers to create the deck of your dreams. This updated version is easy to use and allows customization including levels, board direction, size, color and other features.
What is a design deck in construction
A patio is a structure made primarily of wood (such as hardwood, composite wood, or treated pine) that can be attached to your home or separately. While patios are often built on sloping log houses, such as a large balcony, patios can be built on flat surfaces to create design elements or outdoor spaces.
What are the parts of a deck construction?
The basic deck construction for this project includes: 4 x 4 foundation and studs 2 x 10 beams 2 x 4 diagonal braces 2 x 8 frames and beams 5/4'' deck railing For large decks, you can install dividing walls, also known as plank patterns. in the middle of the terrace.
How do you build a simple deck?
Start with a patio design template and quickly drag and drop patio items like floorboards, railings, planters, and even patio furniture. Terrace design is easy! You can be fined or even do all your hard work if you don't get the proper permits before building your yard.
Do you need a building permit to build a deck?
Keep in mind that if a permit is required for your garden, the building inspector will need to consider the different steps in the garden building process. Floor-level platforms are usually one notch above the ground, so no stairs, railings, or handrails are needed as long as they are no taller than 20 inches.
What is a parting board for decking?
For large terraces, you can place partitions in the middle of the terrace, also known as sample boards. These decking boards are perpendicular to the rest of the terrace and provide a beautiful design. They also allow the use of shorter floorboards and eliminate the need to join the planks together to cover the width of the floor.
What is a design deck in minecraft
Card Game This is a simple design that can be used to play almost any card game in Minecraft. The game consists of a complete deck of 52 cards and 2 jokers. In addition, this design can be reproduced in survival mode without any third-party tools or creative modes, although colors cannot be added in combination.
What are some cool Minecraft decoration ideas?
Minecraft Light themes, lamps, planters and other Minecraft decoration ideas to refresh the style of your Minecraft villas. Table design with candles. Sturdy and modern Minecraft lamp.
How many jokers are in a Minecraft deck?
It's a simple design that can be used in almost any card game in Minecraft. The game consists of a complete deck of 52 cards and 2 jokers. In addition, this design can be reproduced in survival mode without any third-party tools or creative modes, although colors cannot be added in combination.
What can you do with Minecraft paintings?
Combine Minecraft colors to create a gallery wall collage. Read more This beer or wine on tap is like being at home in a medieval building. More instructional video!
What is a design deck diagram
Patio design is the first step in creating a beautiful and functional outdoor space in your home. Whether it's a completed DIY landscape plan or a new construction project, the right patio design will bring value and fun to your home. Before you start planning your patio project, here's some basic information.
How to create a deck design plan with SmartDraw?
How to create a patio layout plan with SmartDraw. SmartDraw offers you various options for drawing the roof plan. You can open a predefined template and modify it, or create your own. SmartDraw contains a large library of symbols. Just click on blocks, posts, faceplates and other items and place them on the face of your deck.
What is a design deck in business
Business design platform: a tool to develop and monetize business plans.
What goes into building a deck?
Norwell: What happens when you build a deck of cards? Rafter brackets - metal brackets that hold the end of the planks that will be used for framing (like a beam). When installed correctly, they will secure the joists to the base plate and prevent the frame from falling.
What kind of wood should I use to build a deck?
Wood materials. The three most common wood floors are mahogany, cedar, and pressure-treated wood, which can be made from a variety of woods.
What is the best structure deck?
The best structural decks are Dark Emperor and Machina Mayhem. They're well stocked with staples and they make some pretty deadly decks, which I've done with both.
What is a design deck plan
Platform design What is platform design? Patio design is the first step in creating a beautiful and functional outdoor space in your home. Whether it's a completed DIY landscape plan or a new construction project, the right patio design will bring value and fun to your home.
What to consider when designing a deck?
What to consider when designing a patio model Think about how you will install your decking. Handrails and balustrades. Adding a patio railing is a great finishing touch and will reduce the risk of you falling off the edge of the patio and injuring yourself. Equipment options. Deck lighting. Stairs, benches and flower pots. Decorate your terrace.
How to properly build a deck?
Start by using dough boards and rock twine to track the position of the posts and foundation. This forms the foundation of the bridge. Decorate the perimeter of the terrace with glue boards and masonry wire. Start by drawing a masonry line parallel to the house. Align the corners using method 3, 4, 5. Measure 3 feet from the intersection of the lines and mark the line. Apply spray paint to bridges/sidewalks as shown. Use a drilled shovel or drill to dig the foundation pillars/holes. Be sure to dig below the frost line if required by local code. Place the concrete pipe molds in the holes and align them so that they extend about 1 inch from the floor. Use mason's lines and tape measure to center the pipes according to the drawings and adjust the position of the holes if necessary. If you want all the columns to be on the same level, use a long spirit level. Fill the holes around the pipes by occasionally pressing on the ground as you travel.
How to build a cheap deck?
- Reuse building materials. Many people offer free building supplies on Craigslist and similar sites. The key to viewing groups or websites
- Build a pallet deck.
- Use standard sizes.
- It goes through pre-treated wood.
- Seal and protect your patio.
What is a design deck in bridge
WisDOT Bridge Handbook Chapter 18 Concrete Floor Constructions January 2019 187 Minimum floor depth is 12 inches. Use 1/2" increments to select depths > 12".
What does bridge deck mean?
The name BRIDGE BRIDGE has 1 meaning: 1. the upper deck on which the ship and the captain sail. Meaning: The upper deck on which the ship and the captain sail. the bridge of the bridge looks like this: upper bridge (upper bridge).
What is a deck truss bridge?
A truss bridge is a type of bridge in which the road surface is supported by load-bearing parts. Truss girders are arranged triangularly to distribute the loads and give the bridge stability.
What is the bridge design pattern?
The bridge model is a design pattern used in software development that aims to decouple the abstraction from its implementation so that they can be distinguished independently of each other, introduced by the Gang of Four. The bridge uses encapsulation, aggregation and can use inheritance to separate responsibilities between different classes.
What is a design deck system
The design of the upper surfaces of the square, the green landscape and the features of potted trees or plants on sunken objects require special design decisions. Plaza terraces are subject to the most rapid and severe degradation of all structural systems.
What is composite floor decking?
What is a Composite Platform? Composite metal deck is a metal deck with a relief pattern on the sides (grooves) at regular intervals. The reliefs allow the concrete to adhere to the metal plate during curing.
How do you frame a deck?
The process of building a bridge involves connecting supporting beams, girders and piers to create a legitimate bridge structure. In this in-depth section, DIYers will learn how to decorate a patio, from installing a baseboard and ice base to framing the patio edge.
What is the difference between a floor deck and a roof deck?
The main difference between a floor skirt and a ceiling skirt is that the ceiling skirt has no reliefs. When the concrete curing process is complete, the metal deck and concrete are glued together as one piece.
How do you build a deck on the ground?
Build a dirt platform. After you've laid the floor over the entire surface of your freestanding patio, you'll need to mark a straight line with chalk. Then use a circular saw or jigsaw to cut the floor along the cut line.
Why choose a paverdeck™ structure?
PAVERDECK™ construction has a cost comparable to that of a cedar or composite roof. You can use coverage options for any budget, and the PAVERDECK™ longevity will add value to your home. Lack of service. Thanks to the maintenance-free bridge, you can use this time for other purposes.
Why choose paverdeck™ galvanized steel panels?
PAVERDECK™ Galvanized Steel Panels were recognized by Jordan Smith of The Build Show as one of the best new products at DECKEXPO 2018 and are the strongest maintenance-free bridge construction. Why buy from us? Easy to install.
How long will pavers last on a galvanized deck?
The galvanized steel deck is designed for a maintenance-free life of 60 years. Concrete pavers can last more than 40 years and stone pavers even longer. Paver pavers last longer in PAVERDECK™ because they wear little, lift off the ground and are insensitive to moisture absorption from the soil.
What is the best decking material for my project?
Paverdeck is maintenance free, fire resistant, durable, lightweight and superior strength making it an ideal investment for residential decks, commercial decks, decks, docks, drainage and other projects.