Paris plaster + fireplace = fire in the house Unfortunately it is highly flammable and is not a suitable or safe environment for the fireplace. The slab had to be removed and replaced with any type of surrounding non-combustible stone, tile, marble or metal.
Type X plaster is a commonly used material for wood stove installations. Type X is 5/8 “thick drywall installed on each side of a 2” x 4 “wooden stud with 16” in the middle or 24 "in the middle between the tips.
Installing drywall over your existing fireplace gives you a smooth surface ready for painting and other decorations. In some cases, construction adhesive is used to glue drywall to bricks. Drywall installation may take longer. You will need a drill bit, masonry screws and masonry screws.
Fireplace design - 6 different materials for a fireplace environment
- SAMPLE. One of the most popular fireplace materials.
- THREE. A less obvious choice for a fireplace setting is wood considering what is burning.
You can use the Hardiebacker board around the fireplace. However, the use of fiber cement panels such as hardboard is acceptable in some areas, including the mantel and fireplace.
Wood frame walls covered with plasterboard are considered flammable. If wall protection is not used, the standard stove or radiator must be positioned at least 30 cm from the wall. This distance can be significantly reduced if milled asbestos panels and / or 28mm panels are used as wall protection.
There are two options when attaching drywall to a masonry chimney wall: use a construction adhesive to glue the drywall directly to the brick, also known as the direct bonding method, or use screws to attach the wall to the brick. dry. Both methods require you to line the joints with tape and compound.
Drywall is flammable and is not suitable for use behind the stove or under tiles. If you remove it from the wall behind the wood stove, you can put concrete wallpaper instead. Use a drywall saw to cut drywall directly.
Yes, HardieBacker® 1/4 concrete slabs are classified as non-flammable according to ASTM E 136 and can be used with other non-flammable materials around a fireplace. This does not mean that the distance to combustible building materials can be reduced by using HardieBacker 1/4.
You may need to drill holes with a masonry drill bit. Use a dowel to test your wall first to see how hard the stone is and how well it accepts the vine. Place the adhesive strips perpendicular to the wall about 16 inches apart. Once they’re anchored, secure the drywall with 1-inch drywall screws.
As a home inspector, the most important thing to know is that most wall and ceiling fixings (including tile and stone surfaces on traditional wood panels) are considered flammable. Paris gypsum is also considered a combustible material due to the coating paper.
National Fire Code
How to highlight the fireplace
Short answer: yes, absolutely, but we recommend using porcelain stoneware or hard floors suitable for very heat resistant ceramic tiles. Wed also recommends using Palace’s heat-resistant adhesive and leaving 15cm of space around the back and sides of the oven.
Learn How to DIY: Upgrade a Fireplace on a Budget
WHICH TILES CAN YOU USE
Main fireplace tile prices include: Natural stone: 25 to 40 per square foot installed. Ceramics: 20 to 35 per square foot installed. Glass: 25 to 40 per square meter installed.