The LG Washer dE error code indicates that the washing machine is unable to lock the door. - The washing machine door is not closed properly. - The door lock on the washing machine may be defective.
How to fix this error:
- Switch off the washing machine and remove the plug from the socket.
- Let the device rest for 10 seconds and turn it back on.
- Switch the appliance back on and restart the wash cycle.
- If the error code persists, the device requires the intervention of a professional technician. Visit our repair request page.
To reset the washing machine:
- Press POWER to turn off the washing machine.
- Unplug the washing machine from the outlet or turn off the machine’s power switch.
- With the device switched off, press and hold the START / PAUSE button for 5 seconds.
- Reconnect or turn on the washing machine.
The error code dE on the Samsung washing machine display means that the door error indicates that the door is not locked or closed properly, or that the drain hose is clogged or incorrectly positioned. The drain hose must not be immersed in water and can therefore lead to malfunctions.
LG, Samsung and Whirlpool are statistically the best washing machines of all time.
The average life of a washing machine is 610 years, according to the United Servicers Association.
The LG washing machine does not spin. The lid switch prevents the washing machine from running when the lid is open. The motor coupling connects the motor to the washing machine gearbox. If the drive is overloaded, the motor clutch cannot protect both the motor and the transmission.
If the LG washing machine does not start, try hard reset the device. To perform a reset, first unplug the washing machine’s power plug. Then press and hold the power button for 5 seconds. Plug the washing machine back in and see if it turns on.
The EU trouble code is usually corrected by redistributing clothes and / or leveling the washing machine. The UE or UE error code indicates an unbalanced load. The LG washing machine tries to rebalance the load when it detects an imbalance.
An IE error code means that the washing machine is filling with water slowly or not at all. This can happen if the taps are not fully open or if the water pressure from the tap or housing is too low. Other possible causes are kinked, jammed or kinked water inlet hoses or clogged water inlet filters.
3 parts to check on LG front loading washing machine when OE error code appears: 1 - Drain pump filter (clogged or clogged) 2 - Drain hose (broken or kinked) 3 - Drain pump (internal objects prevent emptying))
How to bypass the lid lock on a washing machine Turn off the washing machine and unplug the power plug. Find the mounting pins and / or screws that hold the top horizontal plate down. Locate the lid lock switch on the underside of the top cover and where it fits into the device. Put the lid back on and plug the washing machine back into the wall socket.
First pull out the mains plug and let the water run out. Let the water drain out of the tub or drain it by gravity by placing the drain hose on the floor near the drain or in a bucket. Tighten the hose so that the rest of the water does not come out.
ES. Problem with the water temperature. Make sure the water pipe is connected to a cold pipe and not a hot one.
The IE error code on the LG washing machine display indicates that the tub is not filled with water or was not filled properly with water at the scheduled time. This could be due to a faulty water inlet valve, problems with the drain hose, kinked water hoses, non-open washer water valves, or a communication or network problem.
To determine if the drive motor is faulty, first check if the motor is powered. If the drive motor hums but does not spin, rattle, or spin freely, replace it. The washing machine gearbox may be worn or defective. The gears have gears that can fail and prevent the washing machine from spinning.