Use a clean sanding pad moistened with Citristrip® post-wash remover or KleanStrip® odorless petrol to remove stubborn paint residue. If the wood appears clear, clean the surface of all residues after washing with a soft cloth soaked in Citristrip® Stripper.
Citrus removal products such as CitriStrip contain a wax to prevent the product from drying out after application to the surface. After the paint stripper, white spirit is recommended as it is important to dissolve the waxes before starting.
I washed it a couple of times and let it sit for about 30 minutes, but most of the time I come with the first vacuum cleaner. If you leave it on for too long, the wood can become soft. It can also get annoyed.
After washing, dip a swab into the scraper and clean the surface by rubbing back and forth with the grain of the wood. Use fresh, clean release pads until all surface debris is removed. Change the laundry regularly to avoid residues.
Ultimately, you are not trying to neutralize Citristrip, you are trying to remove it. If you see the best way, the company that makes Citristrip also makes a Citristrip cleaner specifically designed to remove Citristrip.
After removing the furniture, you will need something to loosen the residue from the surface and the white spirit (the odorless ones) will help you with this. You can also use it after washing. Now use the brush (if it’s a small area or use a larger brush on a larger piece of furniture) and simply go through each section.
Use CITRISTRIP® Universal Stripper Gel to remove multiple layers of latex and oil paints, lacquers, lacquers, enamels, polyurethane, shellac, acrylic and epoxy from wood, metal and masonry surfaces. Your satisfaction is guaranteed! Okay, so it’s made up of meth, ■■■■■■■ and oranges.
Citristrip is water soluble.
In general, citrus fruits are one of the worst finishers around. It works quite slowly and does an incomplete job. It usually takes several uses to completely remove a finish. The fastest stripper is the one that contains methylene chloride and will do the most thorough job.
KleanStrip® Green® Carbonless Minerals Odorless
Mix equal amounts of vinegar and water and scrub the surface with it to neutralize corrosive agents.
When the part is completely disassembled except for the wood and you are satisfied, you can start cleaning. Thoroughly clean the part with steel wool and water or paint thinner, depending on the stripper used, and make sure any paint stripper residue has been removed.
Normally, the strips should not dry until they have loosened the surface well. If you remove a part with multiple layers of paint, you may need to remove a layer or two and wait until the next day to remove the rest.
Vinegar is a simple, inexpensive, and effective way to remove dried and varnished paint from windows and other hard surfaces. More importantly, vinegar is affordable, environmentally friendly, and removes stubborn colors without dangerous chemicals or toxic fumes. If you don’t like the smell of vinegar, don’t worry.
- Put the stripper in a glass bowl and use the 1/4 inch thick brush. Let stand 324 hours. It starts working right away, but I like to leave it on for at least 6 hours. Check it every few hours to make sure it doesn’t dry out on the surface.
If you are using a pressure washer on wood, wait at least a few weeks before painting in hot, dry weather. The pressure washer presses the water into the wood and it has to dry. Otherwise the color won’t last. (Voice of a sad experience here.)
A. Citristrip® must be applied in a thick film of at least 1/8 thick to keep it moist for 24 hours.