Cannot Find Pool Light Switch: If you can’t find it, it’s normally beneath the light, outside the pool deck, or, in some cases, lightweight JBoxes placed flush with the pool system pad. Pool lights are now a common sight in the most backyard swimming pools, whether they are above or below ground.
Lights for a Swimming Pool
On January 1, 1968, the National Electrical Code (NEC) included swimming pools as a standard and regulation for the first time. (Article 680). It has undergone numerous alterations and updates, the most recent of which occurred in 2011.
If your pool was built before 1968, the underwater lights and filtration pump wiring is probably not up to code. For example, pool light connection boxes have been relocated and lifted 12" to a new location underneath the diving board and on top of the pool deck.
Very old pools also don’t have ladder sockets, pool shells, equipment, or light niches. Pool lights and a home circuit box or swimming sub-panel are connected at a junction box by an electrician who creates a new circuit.
Keep In Mind: Electricity and water do not mix. Is it checked out immediately if you see something suspicious or potentially dangerous? Every year, the media reports on the deaths of people who were electrocuted by faulty pool lights that were not properly grounded.
Floating Lights for the Pool
All swimming pools now include one or more underwater or pool lighting types as a standard feature. Pentair is the owner of several lighting fixture manufacturers that are currently available on the market.
The R-40 bulb, a huge incandescent flood lamp, was the standard for all pool lighting at first. During the 1980s, halogen pool bulbs and optic fiber lighting possibly used both above and below the water’s surface were popular.
In today’s market, LED bulbs are the most common type of pool light. LED lamps, which are now in their sixth generation, are bright and vibrant. Even though the number of LEDs and the light brightness have increased, the cost of LED pool lights has decreased in recent years.
There should be a few issues with your pool lights. When it comes to incandescent bulbs, the average lifespan is 1,000 hours. LED lights can last up to years more than. Only a few decades of the ceiling light and the bulb may be expected.
Note: A gasket protects the bulb under the lens of a pool fluorescent light. However, the entire fixture is kept cool by the surrounding water. For longer than 1-2 seconds, do not use the light without completely submerging it.
LED Pool Lights VS. Fiber Optics Pool Lights
If you buy an inground pool, you can add or replace things like heaters, safety covers, and automatic vacuums later. With an in-ground pool light, you don’t have that option. It’s all or nothing.
Let’s look at the following most popular inground pool lights on the market now and see which one is best for you. Here are some differences between LED pool lights and fiber optics pool lights:
| Details | LED Pool Lights | Fiber Optics Pool Lights |
|---|---|---|
| Access | Hard | Easy |
| Changing Cost | Less | More |
| Brightness | More | Less |
| Safer | Less | More |
| Life | 7-15 Years | 3-7 Years |
| Illuminate Pool | Well | Poor |
| Cost | Less | More |
Pool Light Problem-Solving
With the right lighting, your pool area can have a fantastic vibe for you and your visitors. When they don’t work, it makes everything look bad! You don’t have to call a pro or sink the pool necessarily. Here are some tips for troubleshooting pool lights. First, check out some simple things.
- Safety Comes First!
Safety should always be your top consideration for any job you’re working on. Since water and electricity don’t mix, swimming pools, in particular, need special care. Start by turning off the power to the pool in your fuse box before you begin troubleshooting.
Afterward, switch on the ground-fault circuit interrupter (GFCI). By flipping the GFCI switch, you’re ensuring no power gets into the circuits by accident. Make one final double-check with an electrical test meter or millimeter (found at most hardware stores).
Have you already gone through the motions of doing so? It’s time to tackle some more prevalent problems and find effective solutions.
- Faulty Lamp Shade
Fixing a loose light fixture is among the simplest solutions available. Your pool lights are mounted to your pool by a single lock screw. It’s located at the very peak of the light fixture’s face. It’s time to tighten the lock screw on the ring fixture holding the pool light.
- Leaky Pool Lighting
If you’re wearing goggles while swimming, be sure your pool lights aren’t leaking. For safety reasons, engineers have ensured that the light fixture’s enclosure is designed to keep water out of the bulb.
Because they are made of rubber, lens gaskets are susceptible to warping or disintegration from exposure to chlorine and old age. Don’t worry. It’s a simple fix that anyone can do. You’re done by removing the lock screw and the lights from the pool wall.
A length of cable should be available to allow you to rest the lamp on the deck of the swimming pool. Discard the old gasket after removing the lens frame. Ensure everything in the housing unit is dry before reassembling it with a new one. After that, reinstall the unit in the wall and tighten the lock screw.
- Breaker was Tripped
Pool lights that don’t function should be checked at your breaker box, usually found in a basement along the side of your house. As soon as a circuit breaker detects an overload, it will instantly “trip.” At the very least, your pool will have its circuit breaker in your breaker box.
The circuit breaker may trip if you accidentally overload the circuit. To be safe, always double-check your pool’s breakers. Look for a yellow or red square next to the OFF switch on your breaker panel to verify that it is off. The first step is to unhook anything else using the same circuit.
Next, turn off your circuit breaker by pulling it out and sliding it the opposite way to turn it back on. It indicates that you may require entirely new breakers if the switch automatically switches back to the OFF position.
- The Light Bulb Is No Longer Lit
A blown bulb may cause the light to be off after checking the breaker. Pool light bulb replacement requires how many people? Please, just one (or two)! Get the housing complex on your pool deck and follow the steps above (for replacing the lens gasket).
Once you’ve installed your new bulb, it’s time to test it. Even brand-new halogen bulbs, which are commonly used for pool lighting, will quickly degrade if left exposed to air. Reconnecting the pool’s power will allow you to verify that your new bulb has been installed successfully.
But act swiftly! Having someone watch the light while they turn on the Electricity may be necessary. Dielectric bulb grease can be a lifesaver if you ever need to change a bulb again!
- GFCI Tripped
An earth leakage circuit interrupter makes it easier to keep people from getting electrocuted (GFCI). Anywhere Electricity and water could come into contact is where you’ll locate GFCI buttons. Your breaker panel most likely has one.
You can turn off circuits if the GFCI detects any variations in electricity flow. If there is no risk, they are prone to “nuisance tripping,” in which they turn off the power even if there is no threat. Several hundred feet of wiring, fluorescent lamps, and motors like exhaust fans.
Every month, check your GFCIs to see if they need to be changed.
Summary: With the right lighting, your pool area, can have a fantastic vibe for you and your visitors. Fixing a loose light fixture is among the simplest solutions available. If lens gaskets are susceptible to warping or disintegration from exposure to chlorine and old age, fix it! Pool lights that don’t function should be checked at your circuit breaker box. A blown bulb may cause the light to be off after checking the breaker.
Frequently Asked Questions: FAQs
Some frequently asked questions are given below:
1. Why don’t my pool lights come on?
If it’s stuck, try turning on the pool lights. If the GFCI turns on after turning on the pool light switch, the most likely cause is water in the bulb. You probably have a blown light bulb if the GFCI isn’t working and the lights are off.
2. Where are pool lighting switches usually found?
The junction box is usually outside the deck, about a foot high {except in very old pools} near the light. It is a small box, about 4 x 3, with the tubes at the bottom. They are often behind or under the trampoline. This box is the connection between the pool wires and the power cables.
3. How long does the pool lighting last?
Hard LED lighting the bulbs used in some incandescent lamps are rated for 2000 hours. LED lights have proven to be many times longer.
4. With that in mind, are 12-volt pool lights safe?
A 12 volt light when installed correctly. It is not to say that a properly installed 120-volt incandescent lamp is unsafe with a regularly tested RCD - it has always been proven safe. But low voltage lamps are unsafe and do not work in a vacuum.
5. Does Pool Light have to contain water?
We all should know that the water and light outlets are not mixed. A leaking pool light comes from poor lens packaging. A tap full of water can also cause a switch to fail. So keep this in mind when troubleshooting. It’s easy to replace a pack of lightweight pool lenses, and even inexperienced pool owners can get the job done.
6. What is the price of replacing the pool lighting?
A new gasket for a pool light costs about $25. It would cost $100,150 to fix. About $ 120 is earned from a job well done. The cost of a new device is about $ 200 (approximate).
7. Can I replace the pool lighting with an LED?
You need the right LED pool light that fits your lighting niche. You can use the Pentair IntelliBrite LED pool lamp if you own a Pentair lamp. You can use the Hayward ColorLogic LED pool light if you have a Hayward pool light.
8. How can I repair the pool lights?
Check the electrical panel, which is usually located on the side of your house. Unplug the power cord from the outlet you just switched on or plugged in and re-switch the pool light switch by turning it off and then on again. If that doesn’t work, you may have a broken switch.
9. Why do the pool lights turn on?
Halogen bulbs tend to remove the greasy marks from the skin, causing it to burn prematurely. A better alternative might be to swap the bulb with a replacement LED rather than replacing the entire luminaire.
10. How does the pool lighting work?
The pool light is designed in such a way as to minimize the risk of injury - the whole light is well sealed against the ingress of water for this purpose. Pool lights usually also have a residual current circuit breaker, GFCI, which means that even a small leak will cut the current.
11. What are the Northern Lights?
Bright niches. Lighting the pool and spa requires a bright alcove or a bright house to sit in. A lightweight kennel is used in all vinyl, fiberglass, concrete, and injection molded pools. Lighting niches are usually of standard size, but they can have different hole patterns to which the frame can be attached.
12. Can you light up an existing swimming pool?
LED pool lighting can add color, fun, and energy savings without replacing the whole lamp. All you have to do is replace the bulb. If you need to replace your pool lighting or want to add some vibrancy to your pool after dark, you can turn to LED pool lighting.
13. How can I test my pool lights?
Find the test button on the socket, usually between the two ports. Press it; you should hear it burst. Try turning on the pool light. If the light does not come on and you know it is working properly, your GFCI device is working properly.
14. Is a lamp with a separate pole dangerous?
Poor connection/grounding is the cause of many electrical events in the pool. Don’t turn on the pool lights to represent a potential hazard. It can send Electricity through a pool light even if it is turned off during the day. Anything that has Electricity that goes underwater and is localized is a potential hazard.
15. How do I turn on the pool light?
Remove the frame and lens from the bracket (this often requires lifting it to the ring clamp that holds the bracket together). Replace the lamp and lens package, tighten the locking ring and replace it. Be careful not to get water into the lamp. Turn on the switch, and you should see the light working properly.
Conclusion
If your pool was built before 1968, the underwater lights and filtration pump wiring is probably not up to par. A gasket protects the bulb under the lens of a pool fluorescent light. With an in-ground pool light, you don’t have that option. Even brand-new halogen bulbs will degrade if left exposed to air. Every month, check your GFCIs to see if they need to be changed. A tap full of water can also cause a switch to fail. If the switch on the pool light has tripped, unplug the power cord from the outlet you just turned on or plugged in and reset the switch.
Related Articles:
https://howtodiscuss.com/t/led-speaker-lights/151107
https://howtodiscuss.com/t/how-to-change-a-light-fixture/164006
https://howtodiscuss.com/t/how-to-change-a-pool-light/171954
https://howtodiscuss.com/t/fiber-optic-ceiling-lights/144561
https://howtodiscuss.com/t/empty-pool/142561
Optimized by Mohammad Waqar on 13/07/22